Abstract
Evidence suggests that mechanical stress, including gravity, is associated with osteoblast differentiation and function. To examine effects of microgravity on bone tissue engineering, we used a three-dimensional (3D) clinostat manufactured by Mitsubishi Heavy Industries (Kobe, Japan). A 3D clinostat is a device that generates multidirectional G force. By controlled rotation on two axes, it cancels the cumulative gravity vector at the center of the device. We cultured rat marrow mesenchymal cells (MMCs) in the pores of interconnected porous calcium hydroxyapatite (IP-CHA) for 2 weeks in the presence of dexamethasone using the 3D clinostat (clinostat group). MMCs cultured using the 3D clinostat exhibited a 40% decrease in alkaline phosphatase activity (a marker of osteoblastic differentiation), compared with control static cultures (control group). SEM analysis revealed that although there was no difference between the two groups in number or distribution of cells in the pores, the clinostat group exhibited less extensive extracellular matrix formation than the control group. Cultured IP-CHA/MMC composites were then implanted into subcutaneous sites of syngeneic rats and harvested 8 weeks after implantation. All implants showed bone formation inside the pores, as indicated by decalcified histological sections and microfocus computed tomography. However, the volume of newly formed bone was significantly lower for the clinostat group than for the control group, especially in the superficial pores close to the implant surface. These results indicate that new bone formation in culture was inhibited by use of the 3D clinostat, and that this inhibition was mainly due to suppression of osteoblastic differentiation of MMCs.