The generation of a low HOMO-LUMO energy gap makes organic polymer-based composites an important class of materials with outstanding catalytic efficiency. The present work describes the simple and direct synthesis of an excellent photocatalyst, PC (C26H16NO7S)n via doping of erythrosine-B dye on sulfone infused poly(2-amino thiophenol) assembly (PA, (C6H4NO2S)n). The O 1 s spectrum displays peaks at 531.8 eV and 533.3 eV, representing the O=C and O–C groups of the in-situ generated fluorescein loaded on PA surface. Through absorption study (Tauc’s plot), the optical band gap (Eg) for polymer PA (2.9 eV) and photocatalyst PC (2.1 eV) has been calculated. Further, due to the efficient absorbance in the range of 400–600 nm with a low optical band gap, the applicability of the catalyst, PC has been checked in photocatalytic C–H activation in thiophene, and the generation of C–C bond with p-nitro aryldiazonium salt.
JiaT., DaiY., WangR.Refining energy sources in winemaking industry by using solar energy as alternatives for Fossil Fuels: A review and perspective, Renewable and Sustainable Energy Reviews88 (2018), 278–296.
2.
Renewable energy sources for developing countries, Solar Energy30(4) (1983), 389.
Sinha RayS. Environmentally friendly polymer nanocomposites using polymer matrices from fossil fuel sources, Environmentally Friendly Polymer Nanocomposites (2013), 157–207.
5.
StathiP., DeligiannakisY., LouloudiM.Co-catalytic enhancement of H2 production by Sio2 nanoparticles, , Catalysis Today242 (2015), 146–152.
6.
AlberoJ., GarcíaH. Photocatalytic CO2 reduction, Green Chemistry and Sustainable Technology (2015), 1–31.
7.
LiY., WangM., JiangX.Controllable sulfoxidation and sulfenylation with organic thiosulfate salts via dual electron- and energy-transfer photocatalysis, ACS Catalysis7(11) (2017), 7587–7592.
8.
FagnoniM.et al.
Photocatalysis for the formation of the C–C bond, Chemical Reviews107(6) (2007), 2725–2756. (b) X. Zhou, et al., Photocatalytic dehydrogenative C–C coupling of acetonitrile to succinonitrile, Nature Communications 13(1) (2022). (c)W.Wang, et al., Photocatalytic C–C coupling from carbon dioxide reduction on copper oxide with mixed-valence copper(I)/copper(II), Journal of the American Chemical Society 143(7) (2021), 2984–2993. (d) Y.-M. Lee, et al., Dioxygen activation by a Non-Heme Iron(II) complex: Formation of an iron(iv)–oxo complex via C–H activation by a putative iron(iii)–Superoxo species, Journal of the American Chemical Society 132(31) (2010), 10668–10670. (e) T.B. Boit, et al., Activation of C–O and C–N bonds using non-precious-metal catalysis, ACS Catalysis 10(20) (2020), 12109–12126.
MehtaS.K, KumarS., ChaudharyS., BhasinK.K.Nucleation and growth of surfactant-passivated cds and HgS nanoparticles: Time-dependent absorption and luminescence profiles, Nanoscale2(1) (2010), 145–152. b) C. Singh, et al., Flexible covalent porphyrin framework film: An emerged platform for photocatalytic C–H bond activation, 257 Applied Surface Science 544 (2021), 148938.
12.
ZollerJ., FabryD.C., RuepingM.Unexpected dual role of titanium dioxide in the visible light heterogeneous catalyzed C–H arylation of Heteroarenes, ACS Catalysis5(6) (2010), 3900–3904. (b) D.P. Hari, P. Schroll and B. König, Metal-free, visible-light-mediated direct C–H arylation of heteroarenes with aryl diazonium salts, Journal of the American Chemical Society 134(6) (2012), 2958–2961. (c) J. Kappen, M. Skorupa and K. Krukiewicz, Conducting polymers as versatile tools for the electrochemical detection of cancer biomarkers, Biosensors 13(1) (2022), 31.
13.
MolapoK.M.et al. Electronics of conjugated polymers (I): Polyaniline, International Journal of Electrochemical Science7(12) (2012), 11859–11875.
14.
RahmanMd.et al. Electrochemical sensors based on organic conjugated polymers, Sensors8(1) (2008), 118–141.
15.
AzzamE.M., AbdH.M.El-Salam and R.S. Aboad, Kinetic preparation and antibacterial activity of nanocrystalline poly(2-aminothiophenol), Polymer Bulletin76(4) (2018), 1929–1947.
16.
SedghiR.et al. Application of magnetic nanoparticles modified with poly(2-amino thiophenol) as a sorbent for solid phase extraction and trace detection of lead, copper and silver ions in food matrices, RSC Advances5(83) (2015), 67418–67426.
17.
BoomiP.et al. Improved conductivity and antibacterial activity of poly(2-aminothiophenol)-silver nanocomposite against human pathogens, Journal of Photochemistry and Photobiology B: Biology178 (2018)a, 323–329.
18.
GopalanA.I.et al. Gold nanoparticles dispersed into poly(aminothiophenol) as a novel electrocatalyst— fabrication of modified electrode and evaluation of electrocatalytic activities for Dioxygen Reduction, Journal of Molecular Catalysis A: Chemical256(1–2) (2006), 335–345.
19.
NabidM.R.et al. Preparation and application of poly(2-amino thiophenol)/MWCNTs nanocomposite for adsorption and separation of cadmium and lead ions via solid phase extraction, Journal of Hazardous Materials203–204 (2012), 93–100.
HanJ., LiuY., GuoR.Facile synthesis of highly stable gold nanoparticles and their unexpected excellent catalytic activity for suzuki–miyaura cross-coupling reaction in water, Journal of the American Chemical Society131(6) (2009), 2060–2061.
22.
ChenY.et al. Poly(O-aminothiophenol)-stabilized Pd nanoparticles as efficient heterogenous catalysts for Suzuki cross-coupling reactions, RSC Adv7(74) (2017), 47104–47110.
23.
(a) A.P. Singh, et al., A novel, selective, and extremely responsive thienyl-based dual fluorogenic probe for tandem superoxide andHG2+chemosensing, Dalton Trans 42(10) (2013), 3285–3290. (b) A.P. Singh, et al., Extremely selective “turn-on” fluorescence detection of hypochlorite confirmed by proof-of-principle neurological studies via esterase action in living cells, The Analyst 138(10) (2013), 2829. (c)V.S. Rana, et al.,Anovel pyrene-based aggregation-induced enhanced emission active Schiff base fluorophore as a selective “turn-on” sensor for Sn2+ ions and its application in lung adenocarcinoma cells, Journal of Photochemistry and Photobiology A: Chemistry 436 (2023), 114409. (d) N. Sandhu, et al., X-Ray Crystallographic, Electrochemical, Quantum Chemical and Anti-Microbial Analysis of Fluorescein Based Schiff Base, Journal of Molecular Structure 1221 (2020), 128762. (f) S. Sehrawat, et al., Study of 5-Bromo-2-Thiophene Carboxaldehyde Derived Novel Schiff Base as a Biologically Active Agent as Well as X-Ray Crystallographic Study of C–S Coupled Benzothiazole, Journal of Molecular Structure 1269 (2022), 133782.
24.
a) Y. Luo, et al., Sulfone-modified covalent organic frameworks enabling efficient photocatalytic hydrogen peroxide generation via one-step two-electron O2 reduction, Angewandte Chemie International Edition 62(26) (2023). (b) X.Wang, et al., Sulfone-containing covalent organic frameworks for photocatalytic hydrogen evolution fromwater, Nature Chemistry 10(12) (2018), 1180–1189.
25.
(a)W.J. Van Ooij and A. Sabata, Characterization of films of organofunctional silanes by TOFSIMS and XPS, Journal of Adhesion Science and Technology 5(10) (1991), 843–863. (b) D. Yu. Osadchii, A.I. Olivos-Suarez, A.V. Bavykina and J. Gascon, Revisiting nitrogen species in covalent triazine frameworks, Langmuir 33(50) (2017), 14278–14285. (c) A. Munir, et al., Ultrasmall NI/NIO nanoclusters on thiol-functionalized and exfoliated graphene oxide nanosheets for durable oxygen evolution reaction, ACS Applied Energy Materials 2(1) (2018), 363–371. (d) E.A.M. Hassan, et al., Synergistic effect of hydrogen bonding and π–π stacking in interface of CF/Peek Composites, Composites Part B: Engineering 171 (2019), 70–77.
26.
BarbanoD.M., DellavalleM.E.Thermal Degradation of FD & C Red No. 3 and Release of Free Iodide, J Food Prot47(9) (1984), 668–669.
27.
(a)W.R. Feairheller and J.E. Katon, The vibrational spectra of Sulfones, Spectrochimica Acta 20(7) (1964), 1099–1108. (b) Table 5: Characteristic ir absorption frequencies of organic functional groups. doi:10.7717/peerj-matsci.4/table-5. (c) A.Y. Léon Bermúdez and R. Salazar, Synthesis and characterization of the polystyrene –313 asphaltene graft copolymer by Ft-IR Spectroscopy, CT&F –Ciencia, Tecnologya y Futuro 3(4) (2008), 157–167.
28.
GiroudN., DorgeS., TrouvéG.Mechanism of thermal decomposition of a pesticide for safety concerns: Case of mancozeb, Journal of Hazardous Materials184(1–3) (2010), 6–15.
29.
ZhangL.et al. The effect of hydrogen bonding on self-assembled polyaniline nanostructures, Advanced Functional Materials14(7) (2004), 693–698.
30.
SchreinerJ., JansenD., EctorsD., VolkmannS.XRD analysis of phase development and peak broadening during the production of AAC, ce/papers2(4) (2018), 117–120.
31.
(a) P. Makuła, M. Pacia and W. Macyk, How to correctly determine the band gap energy of modified semiconductor photocatalysts based on UV–vis spectra, The Journal of Physical Chemistry Letters 9(23) (2018), 6814–6817.
32.
ZollerJ., FabryD.C., RuepingM.Unexpected dual role of titanium dioxide in the visible light heterogeneous catalyzed C–H arylation of Heteroarenes, ACS Catalysis5(6) (2015), 3900–3904.
33.
(a) S. Singh, et al., In situ prepared nrcpfs as highly active photo platforms for in situ bond formation between aryldiazonium salts and Heteroarenes, Photochemistry and Photobiology 98(4) (2022), 748–753. (b) R. Devi, et al., Synthesis of well-defined ester-linked covalent organic polymer and its potential applications in C–H bond activation, Journal of Photochemistry and Photobiology A: Chemistry 447 (2024), 115248.
