Aiming at the problem of large number of points and complex calculation of NURBS pre-interpolation, this paper puts forward a look-ahead interpolation with offline feedrate optimization. The NURBS interpolator is divided into two stages: pre-interpolation and real-time interpolation. The pre-interpolation preprocesses the curve segment by segment according to the curvature characteristics, at the same time the exponential function method is adopted during the pre-interpolation in the look-ahead module. This method makes the step increment of interpolation parameters change exponentially in the area with gentle curvature, and greatly reduces the number of pre-interpolation points, which reduces the amount of calculation and improves the real-time performance. The real-time interpolation stage adopts the bidirectional adaptive acceleration and deceleration control method to realize speed smoothing without needing to calculate the deceleration point. The simulation results show that the real-time performance of the algorithm is greatly improved.
BaekDKKoTJYangSH. Fast and precision NURBS interpolator for CNC systems. Int J Precis Eng Manuf.2012; 13: 955-961.
2.
ErwinskiKPaprockiMKarasekG. Comparison of NURBS trajectory interpolation algorithms for high-speed motion control systems. 2021 IEEE 19th International Power Electronics and Motion Control Conference (PEMC). IEEE, 2021.
3.
ObukhovAIMartinovaLILyubimovAB. Developing of the Look Ahead Algorithm for Linear and Nonlinear Laws of Control of Feedrate in CNC. Automation and Remote Control.2020; 81(2): 380-386.
4.
LiuMHuangYYinLGuoJShaoXZhangG. Development and implementation of a NURBS interpolator with smooth feedrate scheduling for CNC machine tools. International Journal of Machine Tools and Manufacture.2014; 87: 1-15.
YehSSHsuPL. Adaptive-feedrate interpolation for parametric curves with a confined chord error. Computer-Aided Design.2002; 34(3): 229-37.
7.
TikhonMKoTJLeeSHKimHS. NURBS interpolator for constant material removal rate in open NC machine tools. International Journal of Machine Tools and Manufacture.2004; 44(2): 237-45.
8.
ParkJNamSYangM. Development of a real-time trajectory generator for NURBS interpolation based on the two-stage interpolation method. International Journal of Advanced Manufacturing Technology.2005; 26(4): 359-65.
9.
TsaiMCChengMYLinKFTsaiNC. On acceleration/deceleration before interpolation for CNC motion control. In: Proceedings of IEEE International Conference on Mechatronics.2005; pp. 382-7.
10.
YongTNarayanaswamiR. A parametric interpolator with confined chord errors, acceleration and deceleration for NC machining. CAD Comput. Aided Des.2003; 35(13); 1249-1259.
11.
SencerBAltintasYCroftE. Feed optimization for five-axis CNC machine tools with drive constraints. Int J Mach Tools Manuf.2008; 48(7-8); 733-745.
12.
NamSHYangMY. A study on a generalized parametric interpolator with real-time jerk-limited acceleration, CAD Comput. Aided Des.2004; 36(1): 27-36.
13.
AnnoniMBardineACampanelliSFogliaPPreteCA. A real-time configurable NURBS interpolator with bounded acceleration, jerk and chord error. Comput. Aided Des.2012; 44: 509-521.
14.
BeudaertXLavernheSTournierC. Feedrate interpolation with axis jerk constraints on 5-axis NURBS and G1 tool path. Int J Mach Tools Manuf. Jun. 2012; 57; 73-82.
15.
NamSHYangMY. A study on a generalized parametric interpolator with real-time jerk-limited acceleration. Computer-Aided Design.2004; 36(1): 27-36.
16.
JahanpourJAlizadehMR. A novel acc-jerk-limited NURBS interpolation enhanced with an optimized S-shaped quintic feedrate scheduling scheme. International Journal of Advanced Manufacturing Technology.2014; 77(9-12): 1889-1905.
17.
JiaZSongDMaJHuGSuW. A NURBS interpolator with constant speed at feedrate-sensitive regions under drive and contour-error constraints. International Journal of Machine Tools & Manufacture: Design, Research and Application, 2017.
18.
LiuHLiuQYuanS. Adaptive feedrate planning on parametric tool path with geometric and kinematic constraints for CNC machining. The International Journal of Advanced Manufacturing Technology, 2017.
19.
ErkorkmazKChenQGZhaoMYBeudaertXGaoXS. Linear programming and windowing based feedrate optimization for spline toolpaths. CIRP Ann.2017; 66: 393-396.
20.
WangT-YZhangY-BDongJ-CKeR-JDingY-Y. NURBS Interpolator with Adaptive Smooth Feedrate Scheduling and Minimal Feedrate Fluctuation. International Journal of Precision Engineering and Manufacturing.2020; 21(2): 273-290.
21.
ChenMSunY. Contour error-bounded parametric interpolator with minimum feedrate fluctuation for five-axis CNC machine tools. International Journal of Advanced Manufacturing Technology, 2019.
22.
ZhongWLuoXChangW, etc. A real-time interpolator for parametric curves. International Journal of Machine Tools & Manufacture: Design, research and application, 2018.
23.
ZhangYZhangHShiJ, et al. Development of an Adaptive-Feedrate Planning and Iterative Interpolator for Parametric Toolpath with Normal Jerk Constraint. International Journal of Precision Engineering and Manufacturing.2020; 22(1).
24.
NiHYuanJJiS, et al. Feedrate Scheduling of NURBS Interpolation Based on A Novel Jerk-continuous ACC/DEC Algorithm. IEEE Access, 2018: 1-1.
