Sage Journals: Discover world-class research

Abstract

The CNC machining of nephrite is increasingly used in the jade engraving industry. As the most important standard for quality evaluation, surface roughness is influenced by cutting parameters. In this paper, taking the Buddha head as the machining object, the influence of cutting parameters on the surface quality of was studied by SYIL S7 CNC milling machine. The grooving experiment was carried out at spindle speed of 24,000 rpm, then the CAXA manufacturing engineer and JDpiant software were comparatively applied in machining. Furtherly, the influence of the spindle speed on the roughness was investigated. The research results were summarized as follows: (1) No edge breakage appeared when feed speed lower than 300 mm/min with the maximum depth of cut of 0.1 mm. In this case, when the jade is machined with the spindle speed range of 16,000–24,000 rpm, the mean roughness $R_{a}$ was in the range of 1,496.111–891.842 nm. (2) JDpiant software is more suitable for CNC jade engraving than CAXA manufacturing engineer. (3) In roughing stage, only the high-speed grinding contdition is satisfied, the integrity of side profile could be guaranteed. The higher spindle speed was conducive to achieve the fine surface quality. (4) The tungsten steel cutter in finish machining stage shows better grinding ability than diamond cutter used in rough machining stage. In order to formulate an economic spindle speed, the finishing surface roughness should be considered in conjunction with the requirement of polishing.

Keywords

Jade engraving CNC cutting parameters surface roughness

Get full access to this article

View all access options for this article.

References

Xia

and Wang

, Jade engraving system, has power cord whose end is connected with graver, where water pump, carving knife, cutter and polishing machine are electrically connected to power button, and operation table whose side is provided with storage box: CN208714796-U. 2019-4-09.

Sun

, Jade jewelry processing method, involves performing polishing of product, including product with first plating and second plating, removing oil liquid by activating dilute sulfuric acid, and cleaning product by steam cleaning machine: CN109567331-A. 2018-4-05.

, Table-level five-axis linkage numerical control machine for jade engraving device, has Z-shaft transversely lying above X-axis, main shaft motor fixed in nut base through main shaft clamp, and carving knife arranged along Z-axis: CN208452665-U. 2019-02-01.

Shi

H.R.

Rui

R.Y.

and Wen

Y.F.

, Optimal design of the compression coil spring in the tool-in-use system of the jade engraving machine based on dynamic analysis, Advanced Materials Research 69–70 (2009), 621–625.

M.F.

, Study on the application of NC technology in the jade engraving, Vocational Technology 14(12) (2015), 90–92.

Yue

C.L.

Song

G.D.

Zhu

et al., The carving technology of the handle-shaped artefacts from YinXu (C.1300-1046 BC) in China, Archaeometry 59(3) (2017), 566–573.

S.Q.

and Yuan

C.F.

, The application of CAXA manufacturing engineer in relief processing function, Die & Mould Manufacture (2) (2017), 75–78.

Yan

G.Y.

Y.H.

Zhao

D.H.

et al., Simulation and experiment study on cutting force of coated tool milling natural marble, Mechanika 22(4) (2016), 297–302.

Zhao

and Lang

X.Y.

, Experimental research on cutting force with diamond mill cutting granite, in: 2010 Int. Conf. on Mechanic Automation and Control Engineering (MACE), IEEE, Piscataway.

10.

Yan

G.Y.

Y.H.

Wang

et al., Research on mathematical model andcuttingcharacteristics in machining of natural marble by diamond coated Tool, Mechanika 25(2) (2019), 165–171.

11.

S.S.

Wang

C.Y.

X.Q.

et al., Influencing factors of surface morphology by single diamond scratching on brittle-hard materials, Diamond & Abrasives Engineering 30(1) (2010), 1–4.

12.

Tangjitsitcharoen

Saksri

and Ratanakuakangwan

, Advance in chatter detection in ball end milling process by utilizing wavelet transform, Journal of Intelligent Manufacturing 26(3) (2015), 485–499.

13.

Cheng

et al., Experimental study on ‘ductile-brittle’ transition in micro-grinding of single crystal sapphire, Int J Adv Manuf Technol 98(9–12) (2018), 3229–3249.

14.

L.J.

Wang

W.L.

and Zhu

G.P.

, Study ontime-domain characteristic of cutting force for different cutting process, Modern Manufacturing Engineering (9) (2016), 107–113.

15.

Hogan

J.D.

Farbaniec

Daphalapurkar

et al., On compressive brittle fragmentation, Journal of the American Ceramic Society 99(6) (2016), 2159–2169.

16.

Saidi

M.N.

Songmene

Kouam

et al., Experimental investigation on fine particle emission during granite polishing process, International Journal of Advanced Manufacturing Technology 81(9–12) (2015), 2109–2121.

17.

Pang

et al., High-speed grinding of HIP-SiC ceramics on transformation of microscopic features, Int J Adv Manuf Technol 102(5–8) (2019), 1913–1921.

18.

Zhang

Xie

Zhu

et al., Micro-grinding performance of hard-brittle chip materials in precision micro-grinding microgroove, J. Shanghai Jiaotong Univ. (Sci.) 23(1) (2018), 70–76.

19.

Lawn

B.R.

Hockey

B.J.

Richter

et al., Indention analysis: Applications in the strength and wear of brittle materials, Journal of Microscopy 130(3) (1983), 295–308.

20.

Jin

Guo

et al., Analysis on the effects of grinding wheel speed on removal behavior of brittle optical materials, Journal of Manufacturing Science and Engineering 139(3) (2016), 031014.

Experimental study on CNC engraving parameters of Afghan white jade

Abstract

Keywords

Get full access to this article

References