Sage Journals: Discover world-class research

Abstract

In order to develop accurate and reasonable test theory, test method and corresponding structural design theory based on model test, Computer Structural Model and civil engineering detection technology are used. Firstly, through the study of theoretical knowledge of structural model, the design of test model is carried out. Secondly, the node and unit number of test model are given to carry out theoretical calculation of model. Thirdly, the strain of arch rib is observed through model test to simulate the stress status of real bridge, and other accessory members are also mechanically tested. Finally, the measured data of arch ribs, suspenders and other components are compared with those of the bridge site. The results show that the geometric size of the model is much smaller than that of the real structure. The model is relatively easy to make, easy to assemble and disassemble, material saving and cost saving. The test results can accurately reflect the actual mechanical characteristics of the structure.

Keywords

Structural model civil engineering detection technology finite element method calculation stress analysis

Get full access to this article

View all access options for this article.

References

Khan

M.I.

Mourad

S.M.

and Zahid

W.M.

, Developing and qualifying civil engineering programs for ABET accreditation, Journal of King Saud University – Engineering Sciences28(1) (2016), 1–11.

António

Casas

J.R.

and Sergi

, A review of distributed optical fiber sensors for civil engineering applications, Sensors16(5) (2016), 748.

Rana

Subramani

and Fangueiro

et al., A review on smart self-sensing composite materials for civil engineering applications, Aims Materials Science3(2) (2016), 357–379.

Ghosh

Rajesh

and Chand

J.S.

, Linear and nonlinear elastic analysis of closely spaced strip foundations using Pasternak model, Frontiers of Structural & Civil Engineering11(2) (2017), 1–16.

Ebrahimian

Astroza

and Conte

J.P.

et al., Nonlinear finite element model updating for damage identification of civil structures using batch Bayesian estimation, Mechanical Systems & Signal Processing84 (2017), 194–222.

Peng

and Hu

, A gaussian process-based dynamic surrogate model for complex engineering structural reliability analysis, Structural Safety68 (2017), 97–109.

Zhao

and Qiuyun

L.I.

, A review on measurement technology for structural testing in civil engineering, Journal of Xian University of Architecture & Technology49(1) (2017), 48–55.

Computer structural model analysis and civil engineering testing technology

Abstract

Keywords

Get full access to this article

References