A mixed-mode delamination of laminate plate made of two sublaminates is presented in the paper. An opening and sliding load mode is obtained as failure model. A quasistatic rate-independent delamination problem of laminate plate with a finite thickness is proposed. A rate-independent delamination model for a laminate Kirchhoff-Love plate is considered as limit of quasistatic process. The failure model is implemented in FEM code to calculate the mixed-mode delamination response. The analysis is based on interface techniques. Within the interface finite element modeling there are calculated the individual components of damage parameters as spring reaction forces, relative displacements and energy release rates along the delamination front.
BrunoD. and GrecoF., An asymptotic analysis of delamination buckling and growth in layered plates, Ternational Journal of Solids and Structures37(43) (2000), 6239–6276.
2.
KimH.-J., Postbuckling analysis of composite laminates with a delamination, Computer and Structures62(6) (1997), 975–983.
3.
CochelinB. and Potier-FerryM., A numerical model for buckling and growth of delaminations in composite laminates, Computer Methods and Applied Mechanics89(1–3) (1991), 361–380.
4.
StorakersB. and AnderssonB., Nonlinear plate theory applied to delamination in composites, Journal of Mechanics and Physics of Solids36(6) (1988), 689–718.
5.
KouchakzadehM. and SekineA.H., Compresive buckling analysis of rectangular composite laminates containing multiple delaminations, Composite Structures50(3) (2000), 249–255.
6.
WilliamsJ.G., On the calculation of energy release rate for cracked laminates, International Journal of Fracture36(2) (1988), 101–119.
7.
DavidsonB.D.HuH. and SchaperyR.A., An analytical crack-tip element for layered elastic structures, Journal of Applied Mechanics62(2) (1995), 294–305.
8.
ZouZ.ReidS.R.SodenP.D. and LiS., Mode separation of energy release rate for delamination in composite laminates using sublaminates, Journal of Solids and Structures38(15) (2001), 2597–2613.
9.
SchoeppnerG.A. and PaganoN.J., Stress fields and energy release rates in cross-ply laminates, International Journal of Solids and Structures11 (1998), 1025–1055.
10.
SunC.T. and ManoharanM.G., Strain energy release rates of an interfacial crack between two orthotropic solids, Journal of Composite Materials23 (1989), 460–478.
11.
GürdalZ.HaftkaR.T. and HajelaP., Design and optimization of laminated composite materials, J. Wiley & Sons, 1999.
12.
BarberoE.J., Finite element analysis of composite materials, CRC Press, USA, 2008.
13.
SzávaI.ŠejnohaM.KormaníkováE. et al., Selected chapters of mechanics of composite materials III, Derc Publishing House, 2013.
14.
MihalikováM. et al., Influence of strain rate on automotive steel sheet breaking, Chemical Letters105(17) (2011), 836–837.
15.
KrálikJ., Probability assessment of analysis of high-rise buildings seismic resistance, Advanced Materials Research712–715 (2013), 929–936.
16.
YanJ., Finite element analysis on steel-concrete-steel sandwich beams, Materials and Structures48(6) (2015), 1645–1667.
17.
CarreraE., Theories and finite elements for multilayered, anisotropic, composite plates and shells, Archives of Computational Methods in Engineering9(2) (2002), 87–140.
18.
DavilaC.G.CamanhoP.P. and RoseC.A., Failure criteria for FRP laminates, Journal of Composite Materials39(4) (2005), 323–345.
19.
ChenP.-H.ChenH.-C. and LeeC.-Y., Damage recognition of gearbox and blade for wind generation system using frequency spectrum analysis, Applied Mathematics and Information Sciences9(1) (2015), 213–218.
20.
SýkoraJ.ŠejnohaM. and ŠejnohaJ., Homogenization of coupled heat and moisture transport in masonry structures including interfaces, Applied Mathematics and Computation219(13) (2013), 7275–7285.
21.
HarabinovaS. and PanulinovaE., Properties of aggregates of steel-making slag, Geo Conference on Energy and Clean Technologies: Conference Proceedings, Albena, Bulgaria – Sofia 2 (2014), 199–202.
22.
MaJ.SahraeeS.WriggersP. and De LorenzisL., Stochastic multiscale homogenization analysis of heterogeneous materials under finite deformations with full uncertainty in the microstructure, Computational Mechanics55(5) (2015), 819–835.
23.
MaruccioC.De LorenzisL.PersanoL. and PisignanoD., Computational homogenization of fibrous piezoelectric materials, Computational Mechanics55(5) (2015), 983–998.
24.
VandellosT.HuchetteC. and CarrereN., Proposition of a framework for the development of a cohesive zone model adapted to carbon-fiber reinforced plastic laminated composites, Composite Structures105 (2013), 199–206.
25.
MartinE.VandellosT.LequillonD. and CarrereN., Initiation of edge debonding: Coupled criterion versus cohesive zone model, International Journal of Fracture199(2) (2016), 157–168.
26.
MaX.WangD.ZhiX.MaX. and ZhangS., Simulation research of eddy current separation technology in scrap copper based on ANSYS finite element method, Journal of Computational Methods in Sciences and Engineering15(2) (2015), 193–211.
