The electrical insulation is one of the main sources of failures in hydro-generators, therefore it is important to research the insulation system of stator bars. In this paper, it is developed a steady-state multiphysics analysis of a stator bar using the Finite Element Method to assess its steady-state behavior in the electrical, magnetic and thermal domains. Different aspects are analyzed in simulations, such as capacitance, mechanical stress and thermal effects. Numerical results are compared with experimental measurements for validation.
CIGRÉ, Survey of hydrogenerator failures, Cigré Report 392, 2009.
3.
BrasilF., Estudo experimental de técnicas de medição de descargas parciais nos enrolamentos estatóricos de hidrogeradores, (in Portuguese) M.S. Thesis, Electrical Engineering Graduate Program, Federal University of Pará, Brazil, 2013.
4.
XiaobingY. and BaojingC., Effect of temperature on the characteristics of frequency domain spectroscopy of generator stator insulation, in: IEEE International Conference on High Voltage Engineering and Application, 2016.
5.
SoltaniR.LafortuneL.DraperR. and KhosraviA., Qualification test results on stator bars of large hydro generators, in: IEEE International Symposium on Electrical Insulation, 2012.
6.
IstadM.RundeM. and NysveenA., A review of results from thermal cycling tests of hydrogenerator stator windings, IEEE Trans. on Energy Conversion26(3) (2011), 890–903.
7.
LuoY.LiZ. and WangH., A review of online partial discharge measurement of large generators, Energies10 (2017).
8.
KoneG. and VolatC., Numerical investigation of transient potential distribution along stress-grading on stators bars (Roebel type), in: Electrical Insulation Conference, 2016.
9.
CastroL.C.TaylorN. and WahlanderM., Dielectric and physico-chemical properties of epoxy-mica insulation during thermoelectric aging, IEEE Transactions on Dielectrics and Electrical Insulation22(6) (2015), 3107–3117.
10.
McDermidW., Experience with accelerated aging and related diagnostic tests for stator coils and bars of rotating machines, in: International Conference on High Volage Engineering and Applications, 2014.
11.
FonsecaW.S.LimaD.S.NunesM.V.A.LimaA.K.F.BezerraU.H. and SoeiroN.S., Analysis of structural behavior of transformer’s winding under inrush current conditions, IEEE Trans. Industry Applications54(3) (2018), 2285–2294.
12.
SilvaJ.R.BastosJ.P.A.SadowskyN. and LeiteJ.V., Electromagnetic and thermal simulation of an oil insulated power transformer, in: 18th International Symposium on Electrical Apparatus and Technologies (SIELA), 2014.
13.
YanC.HaoZ.ZhangS.ZhangB.ZhengT. and LiZ., Computation and analysis of power transformer winding damage due to short circuit fault based on 3-D finite element method, International Journal of Applied Electromagnetics and Mechanics51 (2016), 405–418.
14.
LombardP.FireteanuV. and ConstantinA., Influences on the electromagnetic torque and rotor force of different faults in squirrel-cage induction motors, International Journal of Applied Electromagnetics and Mechanics59 (2019), 805–815.
15.
HaoY.HengL.FanY.ZhenweiJ.BingG.MinG.BodaZ. and ChenzhiZ., Electromagnetic-thermal-stress coupling simulation for shore power cable with insulating crack air gap, International Journal of Applied Electromagnetics and Mechanics1 (2019), 1–15.
16.
MacDonaldD., Losses in Roebel bars: Effect of slot portion on circulating currents, Proc. of the IEEE117 (1970), 111–118.
17.
StoneG.C.BoulterE.A.CulbertI. and DhiraniH., Electrical Insulation for Rotating Machines: Design, Evaluation, Aging, Testing, and Repair, 2nd edn, John Wiley & Sons, 2014.
18.
MeekerD., Finite Element Method Magnetics Version 4.2 User’s Manual, 2015.
BastosJ.CabreiraM.SadowskiN.ArrudaS. and NauS., A thermal analysis of induction motors using a weak coupled modeling, IEEE Trans. on Magnetics33(2) (1997), 1714–1717.
21.
BorgesJ.W.R.FonsecaW.S. and BrasilF.S., Development of a finite element model for steady state electromagnetic-thermal stator bar analysis (in Portuguese), in: VII Simpósio Brasileiro de Sistemas Elétricos, 2018.
