This paper presents three-dimensional topology optimization of magnetic cores for wireless power transfer with double-sided winding coils. In this optimization, the magnetic core shape is represented by the linear combination of the normalized Gaussian functions. The core shape is optimized so that the coupling coefficient between the transmitting and receiving coils is maximized. Moreover, robustness against misalignment between the coils is taken into account in the optimization. It is found that the optimized core shape effectively increases the net magnetic flux interlinked with the receiving coil, and outperforms the conventional core shapes.
NagatsukaY.EharaN.KanekoY.AbeS. and YasudaT., Compact contactless power transfer system for electric vehicles, International Power Electronics Conference (IPEC) (2010), 807–813.
2.
MohamedA.A.S.AnS. and MohammedO., Coil design optimization of power pad in IPT system for electric vehicle applications, IEEE Trans. Magn.54(4) (2018), 9300405.
3.
YilmazT.HasanN.ZaneR. and PanticZ., Mult-objective optimization of circular magnetic couplars for wireless power transfer applications, IEEE Trans. Magn.53(8) (2017), 8700312.
4.
BudhiaM.BoysJ.T.CovicG.A. and HuangC.Y., Development of a single-sided flux magnetic coupler for electric vehicle IPT charging systems, IEEE Trans. Ind. Electron.60(1) (2013), 318–328.
5.
BudhiaM.CovicG. and BoysJ., A new IPT magnetic coupler for electric vehicle charging systems, in: 36th Annual Conference on IEEE Industrial Electronics Society (IECON 2010), 2010, pp. 2487–2492.
6.
ChigiraM.NagatsukaY.KanekoY.AbeS.YasudaT. and SuzukiA., Small-size light-weight transformer with new core structure for contactless electric vehicle power transfer system, in: Energy Conversion Congress and Exposition (ECCE), 2011, pp. 260–266.
7.
YangG.DongS.ZhuC.LuR.WeiG. and SongK., Design of a high lateral misalignment tolerance magnetic coupler for wireless power transfer systems, IEEE PELS Workshop of Emerging Technologies: Wireless Power Transfer (WoW) (2017), 34–39.
8.
BandyopadhyayS.PrasanthV.ElizondoL.R. and BauerP., Design considerations for a misalignment tolerant wireless inductive power system for electric vehicle (EV) charging, in: 19th European Conference on Power Electronics and Applications (EPE’17 ECCE Europe), 2017, pp. 1–10.
9.
MohammadM.ChoiS.IslamM.Z.KwakS. and BaekJ., Core design and optimization for better misalignment tolerance and higher range of wireless charging of PHEV, IEEE Trans. Transport. Electrific.3(2) (2017), 445–453.
10.
SatoT.WatanabeK. and IgarashiH., Multimaterial topology optimization of electric machines based on nomalized gaussian network, IEEE Trans. Magn.51(3) (2015), 7202604.
11.
MoriT.MurakamiR.SatoY.CampeloF. and IgarashiH., Shape optimization of wideband antennas for microwave energy harvesters using FDTD, IEEE Trans. Magn.51(3) (2015), 8000804.
12.
OkamotoY.TominagaY.WakaoS. and SatoS., Topology optimization of rotor core combined with identification of current phase angle in IPM motor using multistep genetic algorithm, IEEE Trans. Magn.50(2) (2014), 7017904.
13.
WatanabeK.SugaT. and KitabatakeS., Topology optimization based on the on/off method for synchronous motor, IEEE Trans. Magn.54(3) (2018), 7201104.
14.
CoelloC.A.C. and PulidoG.T., A micro-genetic algorithm for multiobjective optimization, in: International Conference on Evolutionary Multi-Criterion Optimization (EMO 2001), 2001, pp. 126–140.
15.
Guidlines for limiting exposure to time-varying electric and magnetic fields (1 Hz–100 kHz), Health Physics99(6) (2010), 818–836.
16.
StielauO.H. and CovicG.A., Design of loosely coupled inductive power transfer systems, in: International Conference on Power System Technology (PowerCon 2000), 2000, pp. 85–90.
