Sage Journals: Discover world-class research

Abstract

A multi-purpose module system (MMS), a modular robot, comprises joint and function modules. This robot can be variously configured to form serially connected and quadruped robots. This study presents initial designs and tests for a new locomotion module that uses Mecanum wheels (WM11-01). The WM11-01 comprises two Mecanum wheels on a single rotating shaft. Using this locomotion module, MMS-V01-Wn is proposed. In addition, physical specifications for the robot and equations for its locomotion control scheme are developed. These equations deliver relative rotational speeds of the Mecanum wheels that should generate robot motion in any direction. The WM11-01, at a diameter of only 100 mm, can move through particularly narrow pipes and channel-shaped terrain. We tested the MMS-V01-W1 in a pipe and found that roughness in the pipe surface did not significantly affect the robot’s locomotion. The results below demonstrate the adaptability and effectiveness of a miniaturized omnidirectional locomotion module.

Keywords

MMS modular robot Mecanum wheel module Omni direction

Get full access to this article

View all access options for this article.

References

Zhu

Fang

and Gao

, Mobile platform of rocker-type coal mine rescue robot, Mining Science and Technology 20(3) (2010), 466–471.

Kikuchi

Sakaguchi

Sudo

Bushida

Chiba

and Asai

, A study on a wheel-based stair-climbing robot with a hopping mechanism, Mechanical Systems and Signal Processing 22(6) (2008), 1316–1326.

Quan

and Ma

, Controllable postures of a dual-crawler-driven robot, Mechatronics 20(2) (2010), 281–292.

Rooker

M.N.

and Birk

, Multi-robot exploration under the constraints of wireless networking, Control Engineering Practice 15(4) (2007), 435–445.

Kurokawa

Yoshida

Tomita

Kamimura

Murata

and Kokaji

, Self-reconfigurable M-TRAN structures and walker generation, 8th Conference on Intelligent Autonomous Systems 54(2) (2006), 142–149.

Christensen

D.J.

Schultz

U.P.

and Stoy

, A distributed and morphology-independent strategy for adaptive locomotion in self-reconfigurable modular robots, Robotics and Autonomous Systems 61(9) (2013), 1021–1035.

Ganesh

K.K.

and Pathak

P.M.

, Dynamic modelling & simulation of a four legged jumping robot with compliant legs, Robotics and Autonomous Systems 61(3) (2013), 221–228.

García-López

M.C.

Gorrostieta-Hurtado

Vargas-Soto

Ramos-Arreguín

J.M.

Sotomayor-Olmedo

and Moya Morales

J.C.

, Kinematic analysis for trajectory generation in one leg of a hexapod robot, The 2012 Iberoamerican Conference on Electronics Engineering and Computer Science 3 (2012), 342–350.

Tachino

Sugiura

Hatakeyama

Urushibata

and Uchida

, Modeling and simulation of quadruped form multi-purpose module system MMS for stability control, in: Proceedings of the 3rd International Conference on Design Engineering and Science, 2014, pp. 104–109.

10.

Uchida

Sugiyama

and Tachino

, Attitude control methods for quadruped form MMS (MMS-G) to use state feedback control, International Journal of Applied Electromagnetics and Mechanics 52 (2016), 1553–1560.

11.

Lin

and Shih

, Modeling and adaptive control of an Omni-Mecanum-wheeled robot, Intelligent Control and Automation 4 (2013), 166–179.

12.

Villiers

and Bright

, Development of a control model for a four wheel mecanaum vehicle, in: 25th International Conference of CAD/CAM, Robotics & Factories of the Future Conference, 2010, pp. 1–10.

13.

Guoa

Diaoa

and Xi

, Vision based navigation for Omni-directional mobile industrial robot, Procedia Computer Science 105 (2017), 20–26.

14.

Typiak

Łopatka

Rykała

Ł.

and Kijek

, Dynamics of omnidirectional unmanned rescue vehicle with Mecanum wheels, computer methods in mechanics, AIP Conf. Proc. 1922 (2018), 120005-1–120005-10.

Development of a multi-purpose module system using Mecanum wheel module

Abstract

Keywords

Get full access to this article

References