The design, construction and early operating experience of the electrical systems of five wind farms, with a total installed capacity of 35 MW, is described. The design approaches adopted for the wind farm internal electrical systems and the interfaces to the rural public supply networks have been shown to be successful. No significant failures of electrical equipment or disturbances to the public supply network have occurred.
JenkinsN.Engineering wind farms. Power Engineering Journal, April 1993, pp. 53–60.
2.
FissH.WeckK. H.WeinelF.Connection of wind power generation facilities to the power distribution system and potential effects on the system. Proceedings of the European Community Wind Energy Conference, Travemunde, 8–12 March 1993, pp. 747–750 (H. S. Stephens and Associates).
3.
JenkinsN.Electrical losses within windfarms. Proceedings of Fourteenth British Wind Energy Association Conference, Nottingham, 25–27 March 1992, pp. 129–134 (Mechanical Engineering Publications, London).
4.
IEEE Standard 1094:1991IEEE recommended practice for the electrical design and operation of windfarm generating stations..
5.
SundeE. D, Earth conduction effects in transmission systems, 1969 (Dover Publications, New York).
6.
Engineering Recommendation S34 A guide for assessing the rise of earth potential at substation sites, 1986 (Electricity Association, London).
7.
EndrenyiJ.Analysis of transmission tower potentials during ground faults. IEEE Trans. on Power Apparatus and Systems, October 1967, PAS-86(10).
8.
JenkinsN.VaudinA.Earthing of wind farms. IEE Conference on Renewable energy clean power 2001, 17–19 November 1993, IEE Conference publication 385, pp. 190–195.
9.
Engineering Recommendation G59/1 Recommendations for the connection of embedded generating plant to the regional electricity companies distribution system, 1990 (Electricity Association, London).
