A non-linear curve fit method was used to identify model parameters for the prediction of contact length in grinding. The evaluation shows that the model based on a surface roughness factor demonstrates a high degree of correlation with experimental trends and behaviour. It was found that the roughness parameter Rr is insensitive to depth of cut, speed ratio and material hardness, but is sensitive to the wheel-workpiece material combinations and whether grinding is conducted with or without coolant.
QiH. S.A contact length model for grinding wheel—workpiece contact. PhD thesis, Liverpool John Moores University, 1995.
2.
QiH. S.RoweW. B.MillsB.Contact length in grinding. Part 1: Contact length measurementProc. Instn Mech. Engrs, Part I, 1997, 211 (J1), 67–76.
3.
RoweW. B.QiH. S.MorganM. N.ZhengH. W.The real contact length in grinding based on depth of cut and contact deflections In Proceedings of the Thirtieth International MATADOR Conference, UMIST, 1993, pp. 187–193 (Macmillan Press, New York).
4.
RoweW. B.QiH. S.MorganM. N.ZhengH. W.The effect of deformation on the contact area in grindingAnn. CIRP, 1993, 42 (1), 409–412.
5.
QiH. S.MillsB.RoweW. B.An analysis of real contact length in abrasive machining processes using contact mechanicsWear, 1994, 176, 137–141.
6.
LindsayR. P.HahnR. S.The principles of grinding. SME technical report MRR71-01, 1971.
TsuwaH.On change of arc of contact length in surface grindingJ. Japan Soc. Precision Engng, 1975, 41, 358–363.
9.
VansevenantIr. E.A subsurface integrity model in grinding. PhD thesis, Katholieke University of Leuven, Belgium, September 1987.
10.
VerkerkJ.Final report concerning CIRP cooperative work on the characterisation of grinding wheel topographyAnn. CIRP, 1977, 26 (2), 385–395.
11.
BrandinH.Pendelschleifen und Tiefschleifen Vergleichende Untersuchungen beim Schleifen von Rechteckprofilen. Dissertation, T.U. Braunschweig, Germany, 1978.
12.
KumarK. V.ShawM. C.The role of wheel-work deflection in grinding operationsTrans. ASME, J. Engng for Industry, February 1981, 103, 73–78.
13.
Maris PhD thesis, Katholieke University of Leuven, Belgium, 1977.
14.
RoweW. B.BlackS.MillsB.QiH. S.MorganM.Experimental investigation of heat transfer in grindingAnn. CIRP, 1995, 44 (1), 329–332.
