Surface waviness variations are a major type of defect on planed wood products. A number of methods have been investigated for the inspection of waviness defects on wood surfaces. This paper describes a new implementation of the light sectioning method with the latest structured lighting and machine vision techniques for this purpose. As a reference, a laser profilometer is used. The data from the light sectioning method and from the profilometer are highly correlated.
HesselbachJ.Objektive Bestimmung von Joint-intervallen durch Messung der Messerschlagsweite, Institute for Machine Tools and Manufacture Technique, Technical University of Braunschweig, 2000.
FaustT. D.Real time measurement of veneer surface roughness by image analysisForest Products J., 1987, 37 (6), 34–40.
6.
JacksonM. R.Some effects of machine characteristics on the surface quality of planed and spindle moulded wooden products. PhD Thesis, Leicester Polytechnic, 1986.
7.
ElmendorfA.VaughanT. W.A survey of methods of measuring smoothness of woodForest Products J., 1958, 13 (10), 275–282.
8.
YooS. M.DornfeldD. A.LemasterR. L.Analysis and modeling of laser measurement system performance for wood surfaceTrans. ASME, J. Engng for Industry, 1990, 112 (2), 69–77.
9.
FunckJ.ForrerJ.BulterD.Measuring surface roughness on wood: A comparison of laser scatter and stylus tracing approachesSoc. Photo-Opt. Instrum. Engrs J., 1992, 1821, 173–184.
10.
LemasterR. L.BeallF. C.The use of an optical profilometer to measure surface roughness in medium density fiberboardForest Products J., 1996, 46 (11/12), 73–78.
11.
SandakJ.TanakaC.OhtaniT.Evaluation of surface smoothness by laser displacement sensor. 1: Effect of wood species. J. Wood Sci., 2003, 49 (4), 305–311.
12.
SandakJ.TanakaC.OhtaniT.Evaluation of surface smoothness by a laser displacement sensor. II: Comparison of lateral effect photodiode and multielement arrayJ. Wood Sci., 2004, 50 (1), 22–27.
13.
CostaM. F. M.Surface inspection by an optical triangulation methodOpt. Engng, 1996, 35 (9), 2743–2747.
14.
DocchioF.Design and performance of an optical sensor for the measurement of surface roughness and wavinessSoc. Photo-Opt. Instrum. Engrs J., 1999, 3823, 160–163.
15.
TomassiniP.A novel optical stylus probe for the measurement of surface roughness and waviness. In EUSPEN Topical Conference on Fabrication and metrology in nanotechnology, Denmark, 2001, Vol. 2, pp. 282–289.
PastoriusW.Machine vision for industrial inspection metrology and guidance. In Fourth Annual Canadian Programmable Control and Automation Technology Conference and Exhibition, 1988, paper 13A2-1/1-5.
BrownN.JacksonM. R.ParkinR.BamforthP. E.Machine vision in conjunction with a knowledge-based system for semi-automatic control of the gravure printing processProc. Instn Mech. Engrs, Part I: J. Systems and Control Engineering, 2004, 218 (117), 583–593.
