Predicting cooling tower plume dispersion

Abstract

An assessment of the effects of visible cooling tower plumes on the local environment can be a necessary part of any proposal for a new large industrial process. Predictions of the dispersion of plumes from cooling towers are based on methods developed for chimney emissions. However, the kinds of criteria used to judge the acceptability of cooling tower plumes are different from those used for stack plumes. The frequency of long elevated plumes and the frequency of ground fogging are the two main issues. It is shown that events associated with significant plume visibility are dependent both on the operating characteristics of the tower and on the occurrence of certain meteorological conditions. The dependence on atmospheric conditions is shown to be fairly complex and simple performance criteria based on the exit conditions from the tower are not sufficient for assessments.

Keywords

cooling tower plumes visibility fogging wet-bulb temperature mechanical cooling towers saturation water vapour plume rise

Get full access to this article

View all access options for this article.

References

Her Majesty's Inspectorate of Pollution (HMIP). Combustion Processes of Gas Turbines, Process Guidance Note 1PR 1/2 (Revised 1994), 1996 (HMSO, London).

Rogers

R. R.

A Short Course in Cloud Physics, 1976 (Pergamon Press, Oxford).

Bennett

Sutton

Gardiner

D. R. C.

An analysis of lidar measurements of buoyant plume rise and dispersion at five power stations

Atmospheric Environment, 1992, 26A, 3249–3263.

IMechE Seminar on Condensers and Cooling Towers for Combined Cycles, London, 28 April 1994.

Petterssen

Weather Analysis and Forecasting, Vol. II, Weather and Weather Systems, 2nd edition, 1956, (McGraw-Hill, New York).