Investigation of burning photovoltaic panels on a double-skin facade with ejecting flame from an adjacent room fire

Abstract

Integrating photovoltaic (PV) panels with building envelope or roof to give building- integrated photovoltaic system is now widely used for conservation of energy. PV panels are also installed on double-skin facade (DSF). The window ejecting flame caused by adjacent compartment fire to the cavity may lead to fire in the PV system. To understand the effect of burning PV panels on fire hazard, experimental investigation of burning PV panels in a DSF rig was reported in this paper. To simulate the PV-DSF compartment system, a model rig with a combustion chamber connected to an 8 m tall vertical shaft was built. A 3.5 MW gasoline pool fire of diameter 1.16 m was placed inside the chamber. Four PV panels were installed on the shaft model wall opposite to the chamber model with a vertical facade (back-layer) facing the cavity. Gas temperatures inside the facade cavity in cases with PV panels on the DSF were much higher than in cases without PV panels. The present study shows that burning PV panels inside the DSF cavity could aggravate the fire hazard scenario and should be considered seriously in building design and fire safety management.

Keywords

Ejecting plume Compartment fire High-rise building BIPV

Get full access to this article

View all access options for this article.

References

Bloem

JJ.

Evaluation of a PV-integrated building application in a well-controlled outdoor test environment. Build Environ 2008; 43: 205–216.

Kylili

Fokaides

PA.

Investigation of building integrated photovoltaics potential in achieving the zero energy building target. Indoor Built Environ 2013; 23: 92–106.

Charron

Athienitis

AK.

Optimization of the performance of double-facades with integrated photovoltaic panels and motorized blinds. Sol Energy 2006; 80: 482–491.

Lai

Hokoi

Experimental and numerical studies on the thermal performance of ventilated BIPV curtain walls. Indoor Built Environ 2017; 26: 1243–1256.

Moskowitz

Coveney

Rabinowitz

and Barancik JI. Rooftop photovoltaic arrays: electric shock and fire health hazards. Solar Cells 1983; 9: 327–336.

Sugimura

Otth

Ross

Jr , Lewis KJ and Arnett JC. Flammability of photovoltaic modules. In: Proceedings of the 17th IEEE photovoltaic specialists conference, Orlando, Florida, May 1–4 1984; pp.489–495.

Hastings

Juds

Luebke

and Pahl B. A study of ignition time for materials exposed to DC arcing in PV systems. In: The 37th IEEE photovoltaic specialists conference, Seattle, USA, June 1900–24 2011; pp.003724–003729.

Laukamp

Bopp

Grab

Wittwer

Häberlin

van Heeckeren

Phillip

Reli

Schmidt

Sepanski

Thiem

Vaasseen

PV fire hazard – analysis and assessment of fire incidents. In: Twenty-eight European photovoltaic solar energy conference and exhibition, Paris, France, September 30–October 4 2013; pp.4304–4311.

Chow

Han

SS.

Studying fire behaviour of photovoltaic panels with a cone calorimeter. In: Proceedings of fire and materials 2015 conference, San Francisco, USA, February 2–4 2015; pp.53–63. London: Interscience Communications.

10.

Chow

Han

XM.

A study on fire behaviour of combustible components of two commonly used photovoltaic panels. Fire Mater 2017; 41: 65–83.

11.

Almand

Request for proposals – PV installation best practices review and all hazard assessment. 2012. Quincy, MA: Fire Protection Research Foundation, National Fire Protection Association.

12.

IEC 61730-1: 2004. Ed 1 – Photovoltaic (PV) module safety qualification – part 1: Requirements for construction. Geneva: International Electrotechnical Commission, 2004.

13.

IEC 61730-2: 2004. Ed 1 – Photovoltaic (PV) module safety qualification – part 2: requirements for testing. Geneva: International Electrotechnical Commission, 2004.

14.

ANSI/UL 1730. Standard for flat-plate photovoltaic modules and panels. 3rd ed. Northbrook, IL: Underwriters Laboratories, 2002.

15.

Backstrom

Tabaddor

Effect of rack mounted photovoltaic modules on the fire classification rating of roofing assemblies. Northbrook, IL: Underwriter Laboratories, 2009.

16.

Backstrom

Dini

DA.

Firefighter safety and photovoltaic installations research project. Northbrook, IL: Underwriter Laboratories, 2011.

17.

Dhere

Shiradkar

NS.

Fire hazard and other safety concerns of photovoltaic systems. J Photon Energy 2012; 2: 13.

18.

Chow

Hung

WY.

Effect of cavity depth on smoke spreading of double-skin façade. Build Environ 2006; 41: 970–979.

19.

Chow

CL.

Full-scale burning tests on double-skin façade fires. Fire Mater 2013; 37: 17–34.

20.

Chow

CL.

Spread of smoke and heat along narrow air cavity in double-skin facade fires. Therm Sci 2014; 18: S405–S416.

21.

Miao

Chow

CL.

A study on window plume from a room fire to the cavity of a double-skin façade. Appl Therm Eng 2018; 129: 230–241.

22.

Despinasse

Krueger

First developments of a new test to evaluate the fire behavior of photovoltaic modules on roofs. Fire Safety J 2015; 71: 49–57.

23.

Chow

Hung

Gao

Zou

Dong

Experimental study on smoke movement leading to glass damages in double-skinned façade. Constr Build Mater 2007; 21: 556–566.

24.

Chow

Han

SS.

Estimation of heat release rate for gasoline pool fires. Int J Eng Perform Based Fire Codes 2007; 9: 59–64.

25.

Ohmiya

Hori

Safimori

Wakamatsu

Predictive method for properties of flame ejected from an opening incorporating excess fuel. In: Proceedings of the 4th Asia-Oceania symposium on fire science technology, Tokyo, Japan, May 24–26 2000; pp.375–386.

26.

Lee

Delichatsios

Silcock

GWH.

Heat fluxes and flame heights in façades from fires in enclosures of varying geometry. P Combust Inst 2007; 31: 2521–2528.

27.

Yanagisawa

Goto

Ohmiya

Delichatsios

Lee

Wakatsuki

Effect of a facing wall on facade flames. Fire Saf Sci 2008; 9: 801–811.