Magnetic tracker calibration for an augmented reality system for therapy

Abstract

Magnetic trackers are widely used position/orientation measurement devices in interactive computer systems. These trackers output six-degree-of-freedom position and orientation of their receiver coordinates with respect to their transmitter coordinates. It is a potential solution for realtime position/orientation measurement in an augmented reality system for therapy (ART). However, an obstruction to be overcome is that a magnetic tracker is vulnerable to measurement inaccuracy caused by magnetic field distortions (including ferric and non-ferric distortions) when it is used in metallic environments. The purpose of this paper is to discuss calibration methods used to compensate distortions produced by metallic objects which are moving during the measurement procedure, but fixed with a receiver. Past work on the calibration of magnetic trackers has concentrated on static distortions, which are produced by stationary metallic objects in the environment. Compared with static distortions, in this paper a relatively dynamic situation is considered where the distortion is not constant with time. However, the location of the metallic objects is reflected in the outputs of the receiver so that the distortion can be compensated. This type of distortions, which is called ‘quasi-static distortion’ in this paper, is common in an ART. Compensation of quasi-static distortion is more complicated than that of static distortion and has not been mentioned in past publications. Some new compensation methods for quasi-static distortion will be introduced here. The results demonstrate that the methods are capable of significantly reducing quasi-static distortions.

Keywords

magnetic tracker augmented reality calibration

Get full access to this article

View all access options for this article.

References

Curtis

W. D.

Janin

A. L.

Zikan

A note on averaging rotation. In Proceedings of the Virtual Reality Annual International Symposium ′93, 1993, pp. 377–385.

Livingston

M. A.

State

Magnetic tracker calibration for improved augmented reality registration In Tele-operation and Virtual Environments, October 1997, Vol. 6, pp. 532–546 (MIT Press, Cambridge, Massachusetts).

Ghazisaedy

Adamczyk

Sandin

D. J.

Kenyon

R. V.

Defanti

T. A.

Ultrasonic calibration of a magnetic tracker in a virtual reality space. In Proceedings of the IEEE Annual Virtual Reality International Symposium (VRAIS), Raleigh, North Carolina, 1995, pp. 179–188.

Bryson

Measurement and calibration of static distortion of position data from 3D trackers In Proceedings of SPIE Conference on Stereoscopic Displays and Applications III, 1992, Vol. 1669, pp. 244–254.

Spoor

C. W.

Veldpaus

F. E.

Rigid body motion calculated from spatial coordinates of markers

J. Biomechanics, 1980, 13, 391–393.

Raab

F. H.

Blood

E. B.

Steiner

T. O.

Jones

H. R.

Magnetic position and orientation tracking system

IEEE Trans. Aerospace Electronic Systems, September 1979, 15, 709–719.

Bull

A. M. J.

Berkshire

F. H.

Amis

A. A.

Accuracy of an electromagnetic measurement device and application to the measurement and description of knee joint motion

Proc. Instn Mech. Engrs, Part H, Journal of Engineering in Medicine, 1998, 212 (H5), 347–355.

Tang

S. L.

Kwoh

C. K.

Teo

M. Y.

Ling

K. V.

W. S.

Augmented reality system for medical applications

IEEE Engng Med. Biol. Mag., May-June 1998, 17, 49–58.

Ascension Technology Corporation. Correcting distorted position and orientation data using the curve fitting method. Technical Report, Ascension Technology Corporation, 1997.

10.

Franke

Scattered data interpolation: Tests of some methods

Math. Comput., January 1982, 38, 181–199.

11.

Ascension Technology Corporation. The Flock of Birds: installation and operation guide. Manual, Ascension Technology Corporation, 1996.