New efficient methods for powertrain vibration analysis

Abstract

The paper presents new efficient computational and experimental approaches to a powertrain vibration analysis. A complex computational model of a powertrain (a virtual engine) is a powerful tool for the solution of structural, thermal, and fatigue problems. The virtual engine results have to provide answers to different questions, mainly those concerning the area of noise, vibration, and fatigue components. The paper also includes a description of a fast algorithm for hydrodynamic solution of a slide bearing incorporating pin tilting influences. The main contribution is the fact that all models, namely those of the cranktrain, valvetrain, gear timing mechanism and fuel injection pump, are solved simultaneously, using a complex computational model. Synchronous solutions can have a fundamental effect on the results of powertrain dynamics solutions. Additionally, it might help influences between powertrain parts to be understood. The virtual engine is assembled as well as numerically solved as a multi-body system. Virtual engine results are validated by measurements on a diesel in-line six-cylinder engine.

Keywords

multi-body system finite element model vibrations dynamics powertrain hydrodynamics

Get full access to this article

View all access options for this article.

References

Rebbert

Simulation der Kurbewellendynamik unter Berücksichtigung der hydrodynamischen Lagerung zur Lösung motorakusticher Fragen PhD Dissertation, Rheinisch—Westfälischen Technische Hochschule, Aachen, Germany, 2003.

Knoll

Schönen

Wilhelm

‘Full dynamic analysis of crankshaft and engine block with special respect to elastohydrodynamic bearing coupling.’ Report, Universität Gesamthochschule Kassel, Germany, 2006.

‘Simulation of flexible rotating crankshaft with flexible enginee block and hydrodynamic bearing for a V6 engine.’ SAE technical paper 1999–01-1752, 1999.

Kuchař

Řešení pevnosti dynamicky namáhaných dílů spalovacích motorů PhD Dissertation, Czech Technical University, Prague, Czech Republic, 2007.

Strowe

Chattenberg

‘Friction and CO₂ reduction through an integrated approach of valvetrain components.’

ATZ Technol. 8 (2008): 23–30

Ortmann

Skovbjerg

‘Powertrain analysis applications using ADAMS/Engine powered by FEV. Part 1: Valve spring.’ In Proceedings of the 15th European ADAMS Users Conference, Rome, Italy, 15–27 November 2000, pp. 126–137 (MSC Software, Santa Ana, California).

Chen

‘Dynamic analysis of a 3D Finger follower valve train system with flexible camshafts.’ SAE technical paper 2000–01-0909, 2000.

Knoll

Brands

Schönen

‘Elastohydrodynamic interaction of camshaft and bearings under consideration of valve train forces.’

MTZ (09) (2003): 36–40

Craig

R. R.

Structural dynamics, (John Wiley, New York 1981).

10.

Macosko

C. W.

Rheology: Principles, measurement and applications, (VCH, Weinheim, Germany 1994).

11.

Bahuguna

Marlow

‘Understanding frequency domain viscoelasticity in Abaqus.’ In Proceedings of the Fall 172nd Technical Meeting of the Rubber Division of the American Chemical Society, Cleveland, Ohio, USA, 2007, vol. II, pp. 221–230 (Curran Associates, Red Hook, New York).

12.

Paulstra

‘Modelling of automotive antivibration rubber parts.’ In Proceedings of the Fall 172nd Technical Meeting of the Rubber Division of the American Chemical Society, Cleveland, Ohio, USA, 2007, vol. II, pp. 142–147 (Curran Associates, Red Hook, New York).

13.

Dalrymple

Choi

‘Elastomer rate-dependence: A testing and material modelling methodology.’ In Proceedings of the Fall 172nd Technical Meeting of the Rubber Division of the American Chemical Society, Cleveland, Ohio, USA, 2007, vol. II, pp. 99–106 (Curran Associates, Red Hook, New York).

14.

Butenschön

H. J.

Das hydrodynamische, zylindrische Gleitlager endlicher Breite unter instationärer Belastung PhD Dissertation, Universität Karlsruhe, Germany, 1976.

15.

Trampert

Entwicklung eines realgeometrisch abwälzenden Zahnkontakt modells zur Simulation von Zahnrädertrieben in Verbrennungsmotoren PhD Dissertation, Rheinisch—Westfälischen Technische Hochschule, Aachen, Germany, 2003.

16.

Siroky

Interakce systémů hnacího ústrojí a palivového čerpadla vznětového motoru Diploma Thesis, Brno University of Technology, Brno, Czech Republic, 1987.

17.

Pavelek

Janotkova

‘Application of interferometry to temperature field measurements in neighbourhood of rotating discs.’ In Proceedings of the International Congress of Chemical and Process Engineering (CHISA ‘96), Prague, Czech Republic, 25–30 August 1996, Summaries 5, pp. 69–77 (Process Engineering Publishers, Prague).