This paper presents a method for analysing the unstable vibration of a car disc brake, and numerical results are compared with squeal frequencies from an experimental test. The stationary components of the disc brake are modelled using many thousands of solid and special finite elements, and the contacts between the stationary components and between the pads and the disc are considered. The disc is modelled as a thin plate and its modes are obtained analytically. These two parts (stationary and rotating) of the disc brake are brought together with the contact conditions at the disc/pads interface in such a way that the friction-induced vibration of the disc brake is treated as a moving load problem. Predicted unstable frequencies are seen to be close to experimental squeal frequencies. The numerical simulation indicates that the stability can be improved by shifting the centre of the piston line pressure towards the trailing side of the pad.
YangS.GibsonR. F.Brake vibration and noise: Review, comments and proposalsInt. J. Mater. and Product Technol., 1997, 12 (4–6), 496–513.
2.
YuanY.A study of the effects of negative friction—speed slope on brake squeal. In Proceedings of 1995 ASME Design Engineering Conference, Boston, 1995, Vol. 3, Part A, 1135–1162.
3.
MillsH. R.Brake squeal. Institute of Automobile Engineers, Report 9162B, 1939.
4.
FosberryR. A.C.HolubeckiZ.An investigation of the cause and nature of brake squeal. MIRA report 1955/2, 1955.
5.
NorthN. R.Disc brake squealProc. Instn Mech. Engrs, Part C: J. Mechanical Engineering Science, 1976, C38/76, 169–176.
6.
ErikssonM. Friction and contact phenomena of disc brake related to squeal. PhD thesis, Faculty of Science and Technology, Uppsala University, 2000.
7.
MillsH. R. Brake squeak. Institute of Automobile Engineers, Report 9000B, 1938.
8.
OuyangH.MottersheadJ. E.BrookeldD. J.JamesS.CartmellM. P.A methodology for the determination of dynamic instabilities in a car disc brakeInt. J. Veh. Des., 2000, 23(3/4), 241–262.
9.
LangA. M.SmalesH.An approach to the solution of the disc brake vibration problems In Braking of Road Vehicles (Ed. NewcombT. P.), 22–24 March 1983, pp. 223–231 (IMechE Conf. Publ., Loughborough University of Technology).
10.
AkayA.Acoustics of frictionJ. Acoust. Soc. Am., 2002, 111 (4), 1525–1548.
11.
SpurrR. T.A theory of brake squealProc. Instn Mech. Engrs, Auto Div., 1961, (1), 33–40.
12.
NackW. V.Brake squeal analysis by the finite element methodInt. J. Veh. Des., 2000, 23, 263–275.
13.
LeeY. S.BrooksP. C.BartonD.CrollaD. A.A study of disc brake squeal propensity using parametric finite element model. In Transactions of IMechE European Conference onNoise and Vibration, 12–13 May 1998, pp. 191–201.
14.
RipinZ. B. M. Analysis of disc brake squeal using the finite element method. PhD thesis, Department of Mechanical Engineering, University of Leeds, 1995.
15.
TirovicM.DayA. J.Disc brake interface pressure distributionProc. Instn Mech. Engrs, Part D: J. Automobile Engineering, 1991, 205, 137–146.
16.
HultenJ. O. Some drum brake squeal mechanisms. In Proceedings of 1995 Noise and Vibration Conference, Traverse City, Michigan, 1995, Vol. 1, pp. 377–388.
17.
OuyangH.MottersheadJ. E.CartmellM. P.Brook fieldD. J.Friction-induced vibration of an elastic slider on a vibrating discInt. J. Mech. Sci., 1999, 41, 325–336.
18.
NishiwakiM.Generalised theory of brake noiseProc. Instn Mech. Engrs, Part D: J. Automobile Engineering, 1993, 207, 195–202.
19.
ChanS. N.MottersheadJ. E.CartmellM. P.Parametric resonances at subcritical speeds in discs with rotating frictional loadsProc. Instn Mech. Engrs, Part D:J. Automobile Engineering, 1994, 207, 195–202.
20.
MottersheadJ. E.OuyangH.CartmellM. P.FriswellM. I.Parametric resonances in an annular disc, with a rotating system of distributed mass and elasticity; and the effects of friction and dampingProc. R. Soc. (Lond.) A, 1997, 453, 1–19.
21.
OuyangH.MottersheadJ. E.CartmellM. P.FriswellM. I.Friction-induced parametric resonances in discs: Effect of a negative friction–velocity relationshipJ. Sound and Vibr., 1998, 209, 251–264.
22.
NorthN. R. Disc brake squeal—a theoretical model. MIRA report 1972/5, 1972.
23.
HultenJ. O.FlintJ. An assumed modes approach to disc brake squeal analysis. SAE paper 1999–01-1335, 1999.
24.
PoppK.RudolphM.Brake squeal In Detection, Utilization and Avoidance of Nonlinear Dynamical Effects in Engineering Applications (Ed. PoppK.), 2001, pp. 197–225 (Shaker Verlag, Aachen).
25.
LilesG. D. Analysis of disc brake squeal using finite element methods. SAE paper 891150, 1989.
26.
KinkaidN. M.O'ReillyO. M.PapadopoulosP.Automotive disc brake squeal: A ReviewJ. Sound and Vibr., 2003, to be published.
27.
BaeJ.WickertJ.Free vibration of coupled disc-hat structuresJ. Sound and Vibr., 2000, 235, 117–132.
28.
FrybaL.Vibration of Solids and Structures under Moving Loads, 1972 (Noordho. Groningen).
29.
MoteC. D.Stability of circular plates subjected to moving loadsJ. Franklin Inst., 1970, 290, 329–344.
30.
IwanW. D.MoellerT. L.The stability of a spinning elastic disc with a transverse load systemTrans. ASME, J. Appl. Mechanics, 1976, 43, 485–496.
31.
OnoK.ChenJ. S.BogyD. B.Stability analysis of the head-disc interface in a fiexible disc driveTrans. ASME, J. Appl. Mechanics, 1991, 58, 1005–1014.
32.
MottersheadJ. E.Vibration and friction-induced instability in discsShock Vibr. Dig., 1998, 30, 14–31.
33.
OuyangH.MottersheadJ. E.LiW.A moving-load model for disc-brake stability analysisTrans. ASME, J. Vibr. and Acoust., 2003, 125(1), 53–58.
34.
JamesS.OuyangH.BrookfieldD. J.MottersheadJ. E.Disc brake squeal—an experimental approach. In Proceedings of 5th International Conference onModern Practice in Stress and Vibration Analysis, University of Glasgow, Scotland, 9–11 September 2003.
35.
FieldhouseJ.A study of the interface pressure distribution between pad and rotor, the coefficient of friction and calliper mounting geometry with regard to brake noise. In Proceedings of International Conference onBrakes 2000 Automotive Braking—Technologies for the 21st Century, Leeds, 11–12 July 2000, pp. 3–18.
