Three sets of brake pads were subjected to a series of squeal tests. The pad area in contact with the brake disc was successively reduced down to 50 per cent of the original by removal of friction material either at the leading and trailing edges, at the outer and inner edges or spotwise removal of interior area by drilling. The pad surface geometry strongly affected the occurrence of brake squeals, with a significant reduction for all three pads with 50 per cent contact area. However, the average squeal noise level seems to be controlled by the pad contact length in the sliding direction.
HulténJ. O.Drum brake squeal—a self-exciting mechanism with constant friction. In Proceedings of SAE Truck and Bus Meeting, Detroit, Michigan, 1993, SAE paper 932965.
2.
CharginM. L.DunneL. W.HertingD. N.Nonlinear dynamics of brake squeal. Finite Elements in Analysis and Des., 1997, 28, 69–82.
3.
EngelM.Modelling and simulation of vibrations in sliding contact—application to brakes noises. In Proceedings of 32nd SICE Annual Conference. International Session, Tokyo, Japan, 1993, IEEE Cat. No. 93 TH 0575-1, pp. 1513–1516 (Society of Instrumentation and Control Engineering).
4.
EarlesS. W. E.BadiM. N. M.Oscillatory instabilities generated in a double-pin and disc undamped system: A mechanism of disc-brake squeal. Proc. Instn Mech. Engrs, 1984, 198, 43–50.
5.
BorchertT.Dynamical behaviours of the disc brake pad. SAE paper 912656, 1991.
6.
EarlesS. W. E.ChambersP. W.Disc brake squeal noise generation: Predicting its dependency on system parameters and damping. Int. J. Veh. Des., 1987, 8, 538–552.
7.
MatsuzakiM.IzumiharaT.Brake noise caused by longitudinal vibration of the disc rotor. SAE paper 930804, 1993.
8.
NishiwakiM.Generalized theory of brake noise. Proc. Instn Mech. Engrs, Part D, Journal of Automobile Engineering, 1993, 207(D3), 195–202.
9.
NorthM. R.Disc brake squeal. In Proceedings of IMechE Conference on Braking of Road Vehicles, IMechE paper C38/76, 1976.
10.
OanceaV. G.LaursenT. A.Stability analysis of state dependent dynamic frictional sliding. Int. J. Non-Linear Mechanics, 1997, 32, 837–853.
11.
RheeS. K.JackoM. G.TsangP. H. S.The role of friction film in friction, wear and noise of automotive brakes. Wear, 1991, 146, 89–97.
12.
SherifH. A.On the design of anti-squeal friction pads for disc brakes. SAE Trans., 1991, 100, 678–686.
13.
SuzukiT.KumemuraY.OkudaiN.YamamotoT.NagaiM.Analysis of disc brake squeal. SAE paper 971038, 1997.
14.
MurakamiH.TsunadaNKitamuraT.A study concerned with a mechanism of disc-brake squeal. SAE paper 841233, 1984.
15.
MillnerN.An analysis of disc brake squeal. SAE paper 780332, 1978.
16.
BergmanF.ErikssonM.JacobsonS. A.Software based measurement system for test and analysis of automotive brake squeal. TriboTest, 1999, 5(3).
17.
FieldhouseJ. D.NewcombeT. P.Double pulsed holography used to investigate noisy brakes. Optics and Lasers in Engng, 1996, 25, 455–494.
18.
FelskeA.HoppeG.MatthäiH.Oscillations in squealing disk brakes—analysis of vibration modes by holographic interferometry. SAE paper 780333, 1978.
19.
BergmanF.Gudmand-HøyerL.ErikssonM.JacobsonS.The effect of Cu2 S, PbS, Sb2 S3 solid lubricants on the occurrence of brake squeals for three automotive brake pad matrix types. In Proceedings of 8th International Conference on Tribology, Nordtrib 1998, DTI Tribology Centre, Aarhus, Denmark, 1998.
