Sage Journals: Discover world-class research

Abstract

The current paper deals with the dexterity and stiffness of a three-degree of freedom (DOF) planar parallel manipulator with actuation redundancy, which is a subpart of a four-DOF-hybrid machine tool. Based on the kinematics, the dexterity is analysed. The stiffness indices, which are the maximum deflection of the moving platform under the action of a unit force and the minimum eigenvalue of the stiffness matrix of the manipulator, are presented for investigating the stiffness. According to the minimum eigenvalue index, it is proved that actuation redundancy can improve the stiffness of the parallel manipulator. Moreover, the relationship between the singular configuration and the stiffness of the parallel manipulator is discussed. Compared with the corresponding non-redundant parallel manipulator without the redundant link, the redundantly actuated parallel manipulator has better dexterity and higher stiffness.

Keywords

dexterity stiffness parallel manipulator actuation redundancy

Get full access to this article

View all access options for this article.

References

Wang

L.-P.

Wang

J.-S.

Chen

The dynamic analysis of a 2-PRR planar parallel mechanism. Proc. IMechE, Part C: J. Mechanical Engineering Science, 2006, 219(9), 901–909.

Liu

X.-J.

Tang

Wang

, HANA: A novel spatial parallel manipulator with one rotational and two translational degrees of freedom. Robotica, 2005, 23(2), 257–270.

Bai

Teo

M. Y.

W. S.

Sim

Workspace analysis of a parallel manipulator with one redundant DOF for skull-base surgery. IEEE/RSJ International conference on

Intelligent robots and systems, 2001, pp. 1694–1699 (IEEE, Maui, Hawaii, USA).

Marquet

Krut

Company

Pierrot

ARCHI: A new redundant parallel mechanism-modeling, control and first results. IEEE/RSJ International Conference on

Intelligent robots and systems, 2001, pp. 183–188 (IEEE, Maui, Hawaii, USA).

Dasgupta

Mruthyunjaya

T. S.

Force redundancy in parallel manipulators: Theoretical and practical issues. Mech. Mach. Theory, 1998, 33(6), 727–742.

Chakarov

Study of the antagonistic stiffness of parallel manipulators with actuation redundancy. Mech. Mach. Theory, 2004, 39(6), 583–601.

B.-J.

Freeman

R. A.

Geometric characteristics of antagonistic stiffness in redundantly actuated mechanisms. IEEE International Conference on

Robotics and automation, 1993, pp. 654–661 (IEEE, Atlanta, USA).

B.-J.

Suh

I. H.

S.-R.

Analysis of a 5-bar finger mechanism having redundant actuators with applications to stiffness and frequency modulations. IEEE International Conference on

Robotics and automation, 1997, pp. 759–765 (IEEE, Albuquerque, USA).

Ceccarelli

Carbone

A stiffness analysis for CaPaMan (CassinoParallel Manipulator). Mech. Mach. Theory, 2002, 37(5), 427–439.

10.

Wang

J. S.

Tang

X. Q.

Analysis and dimensional design of a novel hybrid machine tool. Int. J Mach. Tools Manuf., 2003, 43(7), 647–655.

11.

Joshi

Tsai

L.-W.

A comparison study of two 3-DOF parallel manipulators: One with three and the other with four supporting legs. IEEE Trans. Robot. Autom., 2003, 19(2), 200–209.

Dexterity and stiffness analysis of a three-degree-of-freedom planar parallel manipulator with actuation redundancy

Abstract

Abstract

Keywords

Get full access to this article

References