Multi-bladerow fan forced response predictions using an integrated three-dimensional time-domain aeroelasticity model

Abstract

A non-linear integrated aeroelasticity system to predict the forced vibration response of aero-engine fans is presented in this paper. The computational fluid dynamics (CFD) solver, which uses Favre-averaged Navier-Stokes equations on unstructured grids of mixed elements, is coupled to a modal model of the structure so that the effects of blade flexibility can be accommodated. The structural motion due to unsteady fluid forces is computed at every time step and the flow mesh is moved to follow the structure so that the resulting flow unsteadiness is determined in a time-accurate fashion. Two fan forced response case studies are reported in detail. The first one deals with a high-pressure ratio fan, the excitation being due to the upstream variable-angle inlet guide vanes (VIGVs). The unsteady flow analysis with blade motion was conducted using a sector of three VIGVs and four rotor blades. The wake predictions were found to be in good agreement with the corresponding laser measurements. The flow was observed to be completely separated for high VIGV angles and the excitation encompassed several harmonics. The predicted rotor blade vibration levels were generally found to be within 30 per cent of the measured values. The forced response to upstream obstructions was studied in the next fan case study. Three whole bladerows, consisting of 11 struts, 33 VIGVs and 26 rotor blades, were modelled in full. The model also included a prescribed inlet distortion pattern so that the combined effects of stator wakes and inlet distortion on the response of the rotor blades could be studied. The unsteady flow calculations were conducted using a time-accurate non-linear viscous flow representation. Blade motion was also included. Such an undertaking required about 4.2 million grid points to include all three bladerows in a complete stage calculation. To reduce the computational effort, a number of smaller computations were conducted by considering the stator and rotor domains separately: the outflow solution of the stator domain was used as an inflow boundary condition to the rotor domain. The results indicated that such isolated bladerow computations were likely to under-predict the response levels because of neglecting rotor-stator interactions. A number of low engine order (LEO) harmonics were identified from an inspection of the unsteady forcing created by the inlet distortions. Good agreement was obtained for cases where experimental data were available.

Keywords

fluid-structure interaction fan forced response aeroelasticity analysis three-dimensional viscous unsteady flows unstructured grids

Get full access to this article

View all access options for this article.

References

Ewins

D. J.

Han

Z. S.

Resonant vibration levels of a mistuned disk. J. Vibr., Acoust. and Stress and Reliability in Des., 1984, 106, 211–217.

Giles

M. B.

Calculation of unsteady wake/rotor interaction. In AIAA 25th Aerospace Sciences Meeting, Reno, Nevada, 1987, AIAA paper 87–0006.

Rai

M. M.

Navier-Stokes simulations of rotor/stator interaction using patched and overlaid grid. Am. Inst. Aeronaut. Astronaut. J. Propulsion and Power, 1987, 3, 387–396.

Dawes

W. N.

Development of a three-dimensional Navier-Stokes solver for application to all types of turbomachinery. ASME paper 88-GT-70, 1988.

Arnone

Multigrid methods for turbomachinery Navier-Stokes calculations. In Solution Techniques for Large-Scale CFD Problems (Ed. Habashi

), 1995, pp. 293–332 (John Wiley, London).

Denton

J. D.

The calculation of 3D viscous flows through multistage turbomachines. ASME paper 90-GT-19, 1990.

Computation of unsteady flow through steam turbine bladerows at partial admission. Proc. Instn Mech. Engrs, Part A, Journal of Power and Energy, 1997, 211(A3), 197–205.

Linquist

D. R.

Giles

M. B.

On the validity of linearized unsteady Euler equations with shock capturing. AIAA paper 91-1598-CP, 1991.

Hall

K. C.

Clark

W. S.

Calculation of unsteady linearized Euler flows in cascades using harmonically deforming grids. In 6th International Symposium on UAATP, 1991.

10.

Hall

K. C.

Clark

W. S.

A time-linearised Navier-Stokes analysis of stall flutter. ASME paper 99-GT-389, 1999.

11.

Vahdati

Imregun

Non-linear aeroelasticity analyses using unstructured dynamic meshes. Proc. Instn Mech. Engrs, Part C, Journal of Mechanical Engineering Science, 1996, 210(C6), 549–564.

12.

Sbardella

Sayma

A. I.

Imregun

Semiunstructured mesh generator for flow calculations in axial turbomachinery blading. In 18th International Symposium on Unsteady Aerodynamics and Aeroelasticity of Turbomachinery (Ed. Francis

), 1997 (Kluwer Academic Publishers).

13.

Baldwin

B. S.

Barth

T. J.

A one-equation turbulence transport model for high Reynolds number wall-bounded flows. In AIAA 29th Aerospace Sciences Meeting, 1991, AIAA paper 91–0610.

14.

Swanson

R. C.

Turkel

On central-difference and upwind schemes. J. Comput. Phys., 1992, 101, 292–306.

15.

Jorgenson

P. C.

Turkel

Central difference TVD schemes for time dependent and steady state problems. J. Comput. Phys., 1993, 107, 297–308.

16.

Marshall

J. G.

Imregun

An analysis of the aeroelastic behaviour of a typical fan blade with emphasis on flutter mechanisms. ASME paper 96-GT-78, 1996.

17.

Marshall

J. M.

Lee

S. J.

Edmonds

J. D.

Forced response prediction in a high pressure ratio fan using a linearized method and comparison with test results. In 4th National Turbine Engine High Cycle Fatigue (HCF) Conference, Monterey, California.