In this study, a high-resolution three-degrees-of-freedom (3-DOF) motion error measuring system based on interference is described. It can simultaneously measure the linear displacement and two angular errors of a single-axis linear moving platform. The displacement is measured using a polarization interference technique and the two angular errors are also measured based on the geometry optical theorem. The verification results show that the resolution is about 20 nm. The 3-DOF measurement system detected displacements relative to a measurement mirror move with an accuracy of about ±8 μm for a measuring range of ± 50 mm, and detected the angular errors with a related accuracy of about ± 2 arc sec for a measuring range of ± 100 arc sec.
SommargrenG. E., ‘Linear/angular displacement interferometer for wafer stage metrology’Proc. SPIE1088 (1989): 268–272.
3.
NakamuraO.GotoM., ‘Microscopic coordinate measurement by four-beam laser interferometry’Int. J. Jap. Soc. Precision Engng59 (1993): 155–160.
4.
LeeW.KimS. W., ‘An ultraprecision stage for alignment of wafers in advanced microlithography’Precision Engng21 (1997): 113–122.
5.
KimJ. A.KimK. C.BaeE. W.KimS.KwakY. K., ‘Six-degree-of-freedom displacement measurement system using a diffraction grating’Rev. Sci. Instrum71 (8) (2000): 3214–3219.
6.
KimJ. K.BaeE. W.KimS. H.KwakY. K., ‘Design methods for six-degree-of-freedom displacement measurement systems using cooperative targets’Precision Engng26 (2002): 99–104.
7.
NiJ.HuangP. S.WuS. M., ‘A multi-degree-of-freedom measurement system for CMM geometric error’Trans. ASME J. Engng Ind.114 (1992): 362–369.
8.
JyweW. Y.LiuC. H., ‘A new measuring apparatus for verifying the CNC machine tools performance using position silicon detector’J. Chin. Soc. Mech. Engr22 (1) (2001): 21–29.
9.
FanK. C.ChenM. J., ‘A six-degree-of-freedom measurement system for the accuracy of X—Y stages’Precision Engng24 (1) (2000): 15–23.
10.
LauK. C.LiuY., U.S. Patent 7,027,162, 2006.
11.
LiuC. H.JyweW. Y.HsuC. C.HsuT. H., ‘Development of a laser-based high-precision six-degree-of-freedom motion errors measurement system for linear stage’Rev. Sci. Instrum76 (5) (2005): 1–6.
12.
GaoW.HuangP. S.TomohikoY.SatoshiK., ‘A compact and sensitive two-dimensional angle probe for flatness measurement of a large silicon wafer’Precision Engng26 (2002): 396–404.
13.
HuangH. L.LiuC. H.JyweW. Y.WangM. S.FangT. H., ‘Development of a three-degrees-of-freedom laser linear encoder for error measurement of a high precision stage’Rev. Sci. Instrum78 (6) (2007): 1–3
14.
15.
16.
17.
18.
HechtE.Optics (New York: Addison-Wesley Publishing2001)
