This paper describes a system for on-line adjustment of the cutting conditions in a turning operation. Cutting conditions are set based on an adaptive model of the cutting operation taking into consideration the gradual wear of the tool. The objective is to control the rough turning operation for a predetermined tool life under varying cutting conditions. Two case studies show the feasibility of the proposed methodology.
KorenY.Computer Control of Manufacturing Systems, 1983 (McGraw-Hill, New York).
2.
WatanabeT.A model-based approach to adaptive control optimization in milling. In Proceedings of the ASME Symposium on Control of Manufacturing Process and Robotic Systems, 1983.
3.
ChryssoiounisG.GuillotM.A comparison of statistical and AI approaches to the selection of process parameters in intelligent machining. Trans. ASME, J. Engng for Industry, 1990, 112, 122–131.
4.
MatsushimaK.SataT.Development of intelligent machine tool. J. Faculty Engng Univ. Tokyo, 1980, 35(3).
5.
RangwalaS. S.DornfeldD. A.Learning and optimization of machining operations using computing abilities of neural networks. IEEE Trans. on Systems, Man, and Cybernetics, 1989, 19(2), 299–314.
6.
WrightP. K.YenD. W.Adaptive control in machining: A new approach based on the physical constraints of tool wear mechanisms. Trans. ASME, J. Engng for Industry, 1983, 105(1), 31–38.
7.
WangX.DaZ. J.BalajiA. K.JawahirI. S.Performance-based optimal selection of cutting conditions and cutting tools in multi-pass turning operations using genetic algorithms. In Proceedings of 2nd CIRP International Seminar on Intelligent Computation in Manufacturing Engineering (ICME2000), Capri, Italy, June 2000, pp. 409–414.
8.
WangD. X.On-line tool adjustment with adaptive tool wear function identification. Int. J. Prod. Res., 1996, 34(9), 2499–2515.
HastingsW. F.OxleyP. L. B.Predicting tool life from fundamental work material properties and cutting conditions. Ann. CIRP, 1976, 25(1).
11.
GhasempoorA.MooreT. N.JeswietJ.Real time implementation of on-line tool condition monitoring in turning. Int. J. Mach. Tools Mf., 1999, 39, 1883–1902.
12.
DanaiK.UlsoyA. G.A dynamic state model for online tool wear estimation in turning. Trans. ASME, J. Engng for Industry, 1987, 109, 396–399.
13.
NarendraK. S.ParthasarathyK.Gradient methods for the optimization of dynamical systems containing neural networks. IEEE Trans. Neural Networks, 1991, 2(2), 252–262.
