An analytical model making it possible to determine rolling mill stability against fifth octave mode chatter is introduced. The constituents of this model, i.e. a linearized dynamic process model and a structural dynamics model, are defined and combined to obtain a complete expression of mill behaviour under dynamic conditions. Subsequently, mill stability is investigated, using established linear system analysis methods, as a function of a number of mill operational parameters. Finally, illustrative simulation examples are used to highlight typical mill responses in the presence of impending fifth and third octave mode instabilities.
ArimuraT.KamataM.SaitoM.An analysis into the dynamic behaviour of tandem cold mills. In Proceedings of International Conference on The Science and Technology of Iron and Steel; Suppl. Trans. ISIJ, 1971, Vol. 11, pp. 777–781.
2.
RobertsW. L.Cold Rolling of Steel, 1978 (Marcel Dekker, New York).
3.
TamiyaT.FuruiK.IidaH.Analysis of chattering phenomenon in cold rolling. In Proceedings of International Conference on Steel Rolling, Tokyo, 1980, pp. 1191–1202 (ISIJ).
4.
ChefneuxL.FischbachJ.-P.GouzouJ.Study and control of chatter in cold rolling. Iron and Steel Engr, November 1984, 17–26.
5.
PatonD. L.CritchleyS.Tandem mill vibration: Its cause and control. Iron and Steel Making, March 1985, 37–43.
6.
PawelskiO.RaspW.FriedewaldK.Chattering in cold rolling—theory of interaction of plastic and elastic deformation. In Proceedings of 4th International Steel Rolling Conference on The Science and Technology of Flat Rolling, Deauville, France, 1987, Vol. 2, pp. E.11.1–E.11.5.
7.
RobertsW. L.Four-high mill stand chatter of the fifth-octave mode. Iron and Steel Engr, October 1978, 55(10), 41–47.
8.
RobertsW. L.A simplified cold rolling model. Iron and Steel Engineer Year Book, 1965, pp. 925–937.
9.
RobertsW. L.Computing the coefficient of friction in the roll bite from mill data. Blast Furnace and Steel Plant, 1967, 499–508.
10.
NesslerG. L.CoryJ. F.Cause and solution of fifth octave backup roll chatter on 4-h cold mills and temper mills. Iron and Steel Engr, 1989, 482–486.
11.
JohnsonR. E.QiQ.Chatter dynamics in sheet rolling. Int. J. Mech. Sci., 1994, 36(7), 617–630.
12.
HuP. H.EhmannK. F.A dynamic model of the rolling process—Part I: Homogeneous model. Int. J. Mach. Tools Mf., 2000, 40, 1–19.
13.
HuP. H.Stability and chatter in rolling. PhD thesis, Northwestern University, Evanston, Illinois, 1998.
YunI. S.WilsonW. R. D.EhmannK. F.Review of chatter studies in cold rolling. Int. J. Mach. Tools Mf., 1998, 38, 1499–1530.
16.
YunI. S.WilsonW. R. D.EhmannK. F.Chatter in the strip rolling process, Part I: Dynamic model of rolling. Trans. ASME, J. Mfg Sci. Engng, 1998, 120(2), 330–336.
17.
YunI. S.EhmannK. F.WilsonW. R. D.Chatter in the strip rolling process, Part II: Dynamic rolling experiments. Trans. ASME, J. Mfg Sci. Engng, 1998, 120(2), 337–342.
18.
YunI. S.EhmannK. F.WilsonW. R. D.Chatter in the strip rolling process, Part III: Chatter model. Trans. ASME, J. Mfg Sci. Engng, 1998, 120(2), 343–348.
19.
RoarkR. J.Formulas for Stress and Strain, 4th edition, 1965 (McGraw-Hill, New York).
20.
YaritaI.FurukawaK.An analysis of chattering in cold rolling of ultrathin gauge steel strip. Trans. Iron and Steel Inst. Japan, 1978, 18, 1–10.
