The stability of a tandem mill is analysed by considering interstand interactions. In this part of the paper the stability of the multistand multimodal chatter model, developed in Part 1 [1], is ascertained. The general model is represented in a simplified form, which highlights only phenomena caused by strip velocity, or equivalently, strip tension variations between stands. This mechanism constitutes one of the most critical sources of self-excitation in the operation of tandem mills and leads to the most detrimental effects associated with third-octave mode chatter. As before, the theoretical analysis of the stability conditions is followed by a simulation study that shows the major dynamic trends in the mill's behaviour.
HuP. H.ZhauH.EhmannK. F.Third-octave-mode chatter in rolling. Part 1: Chatter model. Proc. IMechE, Part B: J. Engineering Manufacture, 2006, 220(B8), 1267–1277.
2.
TamiyaT.FuruiK.IidaH.Analysis of chattering phenomenon in cold rolling. Proceedings of the International Conference on Steel rolling, Tokyo, 1980, pp. 1191–1202, (Iron and Steel Industry, Japan).
3.
TlustyJ.CritchleyS.PatonD.Chatter in cold rolling. Ann CIRP, 1982, 31(1), 195–199.
4.
YunI. S.EhmannK. F.WilsonW. R. D.Chatter in the strip rolling process, Part III: Chatter model. Trans. ASME, J. Mfg Sci Engng, 1998, 120(2), 343–348.
5.
HuP. H.ZhauH.EhmannK. F.Third-octave-mode chatter in rolling. Part 2: Stability of a single-stand mill. Proc. IMechE, Part B: J. Engineering Manufacture, 2006, 220(B8), 1279–1292.
6.
HuP. H.Stability and chatter in rolling. PhD Thesis, Northwestern University, Evanston, Illinois, 1998.
