Polyvinyl acetate (PVAc) adhesives present several advantages: ready to use, short setting time, flexible joint, easy to clean and long storage life. On the other hand, formaldehyde-based adhesives are less expensive and give a rigid bond.
In this work, the combination of a PVAc glue and UF resin for surfacing MDF with wood veneer was assessed. The reactivity of different mixing ratios was evaluated using ABES (automated bonding evaluation system) machine as well as the wettability of beech veneers after different heat pre-treatments. The obtained results have shown that a mixture of PVAc/UF could be used for surfacing MDF with beech veneer without loss of mechanical properties, when compared with pure PVAc.
AltinokM, AtarM, KeskinH, KorkutS and KocaturkI. 2011. Determination of bonding performance of several modified wood adhesives.Int. J. Phys. Sci.6(2): 294–300.
2.
AmazioP, AvellaM, ErricoM, GentileG, BalducciF, GnaccariniA, MoratallaJ and BelancheM. 2011. Low formaldehyde emission particleboard panels realized through a new acrylic binder.J. Appl. Polym. Sci.122(4): 2779–2788.
3.
CostaN, PereiraJ, MartinsJ, FerraJ, CruzP, MagalhãesF, MendesA and CarvalhoL. 2012. Alternative to latent catalysts for curing UF resins used in the production of low formaldehyde emission wood-based panels.Int. J. Adhes. Adhes., 33: 56–60.
4.
CostaN, PereiraJ, FerraJ, CruzP, MoreiraJ, MartinsJ, MagalhãesF, MendesA and CarvalhoL. 2013a. The role of sucrose in amino polymers synthesized by the strongly acid process.J. Adhes. Sci. Technol.27(7): 763–774.
5.
CostaN, PereiraJ, FerraJ, CruzP, MartinsJ, MagalhãesF, MendesA and CarvalhoL. 2013b. Evaluation of bonding performance of amino polymers using ABES.J. Adhes., DOI: 10.1080/00218464.2013.784693
6.
CarvalhoL, MagalhãesF and FerraJ. 2012. Formaldehyde emissions from wood-based panels – testing methods and industrial perspectives, inChemistry, applications and role in polymerization, ChengC B and LnF H, Editors., Hauppauge, NY: Nova Science Publishers.
7.
CuiHW and DuGB. 2013. Development of a novel polyvinyl acetate type emulsion curing agent for urea formaldehyde resin.Wood Sci. Technol.47(1): 105–119.
8.
DespresA, PizziA, VuC and PaschH. 2008. Formaldehyde-free aminoresin wood adhesives based on dimethoxyethanal.J. Appl. Polym. Sci.110(6): 3908–3916.
9.
DespresA, PizziA and DelmotteL. 2010. Colourless formaldehyde-free urea resin adhesives for wood panels.Eur. J. Wood Wood Products68(1): 13–20.
10.
DunkyM. 2001. The chemistry of adhesives. In:COST Action E13: Wood Adhesion and Glued Products, State of the art Report, DunkyM E, Editor.
11.
EN 311:2002 Wood-based panels — Surface soundness — Test method
12.
EomY.-G., KimJ.-S, KimS, KimJ.-A. and KimH.-J. 2006. Reduction of Formaldehyde Emission from Particleboards by Bio-Scavengers.Mokchae Konghak. J. Korean Wood Sci. Technol.34(5): 29–41.
13.
EstevesB and PereiraH. 2009. Wood modification by heat treatment: a review.Bioresources4(1): 370–404.
14.
FernandesS, SantosJ, DuarteC, CardeiraF, SantosJ and BoardadoJ. 2008. Upgrade of PVAC-based glues for their application in wet environments and in structures. An Industry-involving project.Proc. ECOWOOD’08, 3rd International Conference on Environmentally-Compatible Forest Products. Fernando Pessoa University, Porto, Portugal.
15.
FerraJ, MenaP, MartinsJ, MendesA, CostaM, MagalhãesF and CarvalhoL. 2010. Optimization of the synthesis of urea-formaldehyde resins using response surface methodology.J. Adhes. Sci. Technol.24(8–10): 1455–1472.
16.
FrihartCR. 2005. Wood adhesion and adhesives, in Handbook of wood chemistry and wood composites, RowellR M, Editor, CRC Press: Boca Raton, Fla. 215–278.
17.
HeinrichH. 2001. Other Woodworking Adhesives, InCOST Action E13: wood adhesion and glued products, DunkyM E, Editor. WG1: Wood Adhesives, State of the art Report.
18.
KimS, KimH-J, KimH-S and LeeH. 2006. Effect of bio-scavengers on the curing behavior and bonding properties of melamine-formaldehyde resins.Macromol. Mater. Eng.291(9): 1027–1034.
19.
KumarR, HanT, RozmanH, DaudW and IbrahimM. 2007. Studies in the process optimisation and characterisation of low formaldehyde emission urea-formaldehyde resin by response surface methodology.J. Appl. Polym. Sci.103(4): 2709–2719.
MartinsJ, PereiraJ, CoelhoC, FerraJ, MagalhãesF and CarvalhoL. 2013. Adhesive bond strength development evaluation using ABES in different lignocellulosic materials.Int. J. Adhes. Adhes., doi: 10.1016/j.ijadhadh.2013.08.003
22.
PaivaN, HenriquesA, CruzP, FerraJ, CarvalhoL and MagalhãesF. 2012. Production of melamine fortified urea-formaldehyde resins with low formaldehyde emission.J. Appl. Polym. Sci.124(3): 2311–2317.
23.
PecinaH and PaprzyckiO. 1988. Wechselbeziehungen zwischen der Temperaturbehandlung des Holzes und seiner Benetzbarkeit.Holz. Holzwerwert40(1): 5–8.
24.
PedersenA. 2010. AswoodTM adhesive systems for furniture and flooring applications.Proc. Processing Technologies for the Forest and Biobased Products Industries pp. 60–65, Salzburg, University of Applied Sciences, Kuchl, Austria.
25.
PrasittisopinL and LiK. 2012. A new method of making particleboard with a formaldehyde-free soy-based adhesive.Compos. A: Appl. Sci. Manuf., 41(10): 1447–1453.
26.
SchiklM and DunkyM. 1996. Harnstoff-Formaldehyd-Harze als flüssige Phase bei der Benetzung von Holz.Holzforschung und Holzverwertung48(4): 55–57.
27.
Suomi-LindbergL, PulkkinenP and NussbaumR. 2001. Influence of wood component on the bonding process and the properties of wood products, inCOST Action E13: Wood Adhesion and Glued Products, State of the art Report, DunkyM, Editor. p. 123–145.
28.
TangL, ZhangZ-G, QiJ, ZhaoJ-R and FengY. 2011. The preparation and application of a new formaldehyde-free adhesive for plywood.Int. J. Adhes. Adhes.31(6): 507–512.
29.
TiemannH. 1920. Effect of different methods of drying on the strength and hygroscopicity of wood, inThe kiln dryinf of lumber: a practical and theoretical treatise, TiemannH, Editor, J. B. Lippincott.
30.
UysalB. 2005. Bonding strength and dimentional stability of laminated veneer lumbers manufactured by using different adhesives after the steam test.Int. J. Adhes. Adhes.25(5): 395–403.
31.
WangY, YadamaV, LaborieM-P and BhattacharyyaD. 2010. Cure kinetics of PF/PVAc hybrid adhesive for manufacturing profiled wood-strand composites.Holzforschung, 64(5): 603–608.
