The fire performance of magnesium potassium phosphate cement (MKPC) binders blended with fly ash (FA) and ground granulated blast furnace slag (GBFS) was investigated up to 1000°C using X-ray diffraction, thermogravimetric analysis and SEM techniques. The FA/MKPC and GBFS/MKPC binders dehydrate above 200°C to form amorphous KMgPO4, concurrent with volumetric and mass changes. Above 1000°C, additional crystalline phases were formed and microstructural changes occurred, although no cracking or spalling of the samples was observed. These results indicate that FA/MKPC and GBFS/MKPC binders are expected to have satisfactory fire performance under the fire scenario conditions relevant to the operation of a UK or other geological disposal facility
QiaoF., ChauC. K. and LiZ.: ‘Property evaluation of magnesium phosphate cement mortar as patch repair material’, Constr. Build. Mater., 2010, 24, (5), 695–700. doi: 10.1016/j.conbuildmat.2009.10.039
2.
MilestoneN. B.: ‘Reactions in cement encapsulated nuclear wastes: need for toolbox of different cement types’, Adv. Appl. Ceram., 2006, 105, (1), 13–20. doi: 10.1179/174367606X81678
3.
SinghD., WaghA. S., CunnaneJ. C. and MayberryJ. L.: ‘Chemically bonded phosphate ceramics for low-level mixed-waste stabilization’, J. Environ. Sci. Health A, 1997, 32A, (2), 527–541.
4.
SinghD., WaghA. S., TlustochowiczM. and JeongS. Y.: ‘Phosphate ceramic process for macroencapsulation and stabilization of low-level debris wastes’, Waste Manage., 1998, 18, (2), 135–143. doi: 10.1016/S0956-053X(98)00018-X
5.
SinghD., JeongS. Y. and DwyerK.: ‘Ceramicrete: a novel ceramic packaging system for spent-fuel transport and storage’, ‘Proc. Waste Management Conf., Tucson, AZ, USA, February-March, Argonne National Laboratory’; 2000. Document 41-41 available at: www.wmsym.org/archives/2000/wednesday.htm
6.
SinghD., MandalikaV. R., ParulekarS. J. and WaghA. S.:, ‘Magnesium potassium phosphate ceramic for 99Tc immobilization’ J. Nucl. Mater., 2006, 348, (3), 272–282. doi: 10.1016/j.jnucmat.2005.09.026
7.
WaghA. S., JeongS.-Y. and SinghD.: ‘Mercury stabilization in chemically bonded phosphate ceramics’, 1997, San Antonio, TX, American Ceramic Society.
8.
WaghA. S., StrainR., JeongS. Y., ReedD., KrauseT. and SinghD.: ‘Stabilization of Rocky Flats Pu-contaminated ash within chemically bonded phosphate ceramics’, J. Nucl. Mater., 1999, 265, (3), 295–307. doi: 10.1016/S0022-3115(98)00650-3
9.
WaghA. S., MaloneyM. D., ThomsonG. H. and AntinkA.: ‘Investigations in ceramicrete stabilization of hanford tank wastes’, ‘Proc. Waste Management Conf., Tucson, AZ, USA, February’, 2003. Document 46-4 available at: http://www.wmsym.org/archives/ 2003/html/46.html
10.
SharpJ. H., MilestoneN. B., HillJ. and MillerE. W.: ‘Cementitious systems for encapsulation of intermediate level waste’, ‘Proc. 9th Int. Conf. on ‘Radioactive Waste management and environmental remediation’, Oxford, UK, September’, 2003. Available at: http://www.isl. group.sheffield.ac.uk/papers/NBMICEM03paper.pdf
11.
HayesM. and GodfreyI. H.: ‘Development of the use of alternative cements for the treatment of intermediate level waste’, ‘Proc. Waste Management Conference Tucson, AZ, USA, February–March’, 2007. Available at: http://www.wmsym.org/archives/2007/pdfs/7328. pdf
12.
CovillA., HyattN. C., HillJ. and CollierN. C.: ‘Development of the use of alternative cements for the treatment of intermediate level waste’, Adv. Appl. Ceram., 2011, 110, (3), 151–156. doi: 10.1179/1743676110Y.0000000008
13.
Nuclear Decommissioning Authority: ‘Geological Disposal: Waste package accident performance status report, NDA/RWMD/032, 2010’. Available at: https://www.nda.gov.uk/publication/geological- disposal-waste-package-accident-performance-status-report-december-2010/
US Department of Energy: ‘Waste isolation pilot plant recovery plan’, 2014, Washington, DC, DOE.
16.
DelhommeF., AmbroiseJ. and LimamA.: ‘Effects of high temperatures on mortar specimens containing Portland cement and GGBFS’, Mater. Struct., 2012, 45, (11), 1685–1692. doi: 10.1617/s11527-012-9865-7
17.
MatesováD., BonenD. and ShahS. P.: ‘Factors affecting the resistance of cementitious materials at high temperatures and medium heating rates’, Mater. Struct., 2006, 39, (4), 455–469. doi: 10.1007/s11527-005-9041-4
18.
KingeryW. D.: ‘Fundamental study of phosphate bonding in refractories: I, literature review’, J. Am. Ceram. Soc., 1950, 33, (8), 239–241. doi: 10.1111/j.1151-2916.1950.tb14171.x
19.
LimesR. W. and PonzaniD.: Basic refractory compositions for intermediate temperature zones’, ‘US patent no. 3, 285, 758’; 1966.
20.
LimesR. W. and RussellR. O.: ‘Process for preparing fast-setting aggregate compositions and products for low porosity produced therewith’3, ‘US patent no. 3, 879, 209’, 1975.
21.
GardnerL. J., CorkhillC. L., BernalS. A., CollierN. C., ProvisJ. L. and HyattN. C.: ‘The effect of water content on blended magnesium potassium phosphate cement binders’, Cem. Concr. Res., 2015, 74, 78–87. doi: 10.1016/j.cemconres.2015.01.015
22.
International Atomic Energy Agency: ‘Regulations for the safe transport of radioactive material; specific safety requirements’, ‘2012 edn’; 2012, Vienna, IAEA.
23.
ZhangS., ShiH., HuangS. and ZhangP.: ‘Dehydration characteristics of struvite-K pertaining to magnesium potassium phosphate cement system in non-isothermal condition’, J. Therm. Anal. Calorim., 2013, 111, 35–40. doi: 10.1007/s10973-011-2170-9
24.
GardnerL. J., BernalS. A., WallingS. A., CorkhillC. L., ProvisJ. L. and HyattN. C.: ‘Characterisation of magnesium potassium phosphate cements blended with fly ash and blast furnace slag’, Cem. Concr Res., 2015, 78–87.
25.
NeimanR. and SarmaA. C.: ‘Setting and thermal reactions of phosphate investments’, J. Dent. Res., 1980, 59, (9), 1478–1485. doi: 10.1177/00220345800590090401
26.
SarkarA. K.: ‘Hydration/dehydration characteristics of struvite and dittmarite pertaining to magnesium ammonium phosphate cement systems’, J. Mater. Sci., 1991, 268, (9), 2514–2518. doi: 10.1007/BF01130204
27.
AbdelrazigB. E. I. and SharpJ. H.: ‘Phase changes on heating ammonium magnesium phosphate hydrates’, Thermochim. Acta., 1988, 129, (2), 197–215. doi: 10.1016/0040-6031(88)87336-2
28.
GraeserS., PostlW., BojarH.-P., BerlepschP., ArmbrusterT., RaberT., EttingerK. and WalterF.: ‘Struvite-(K), KMgPO4·6H2O, the potassium equivalent of struvite – a new mineral’, Eur. J. Mineral., 2008, 20, (4), 629–633. doi: 10.1127/0935-1221/2008/0020-1810
29.
MathewM. and SchroederL. W.: ‘Crystal structure of a struvite ana-logue, MgKPO4•6H2O’, Acta Crystallogr., 1979, 35B, (1), 11–13. doi: 10.1107/S0567740879002429
30.
BarbosaV. F. F. and MacKenzieK. J. D.: ‘Synthesis and thermal behaviour of potassium sialate geopolymers’, Mater. Lett., 2003, 57, (9–10), 1477–1482. doi: 10.1016/S0167-577X(02)01009-1
31.
BakharevT.: ‘Thermal behaviour of geopolymers prepared using class F fly ash and elevated temperature curing’, Cem. Concr. Res., 2006, 36, 1134–1147. doi: 10.1016/j.cemconres.2006.03.022
32.
HallD. A., StevensR. and El-JazairiB.: ‘The effect of retarders on the microstructure and mechanical properties of magnesia–phosphate cement mortar’, Cem. Concr. Res., 2001, 31, (3), 455–465. doi: 10.1016/S0008-8846(00)00501-9
33.
WilsonA. D. and NicholsonJ. W.: ‘Acid-base cements: their biomedical and industrial applications’, 1993, Cambridge, Cambridge University Press.
