Thin films of titania (TiO2) doped with 1–5 wt-%Fe were spin coated on glass slides and then annealed at 500°C for 2 h. Results revealed that all of the films were ∼500 nm in thickness and consisted of anatase. Increasing the dopant levels revealed the following trends: the major (101) anatase peak shifted to larger lattice spacing [the peaks were normalised using the principal (210) chromium coating peak as an in situ standard]; the microstructures showed increasing shrinkage cracking, a phenomenon that has not been reported previously; the optical transmittance generally decreased; the amplitude of the transmittance curves generally decreased; and the optical indirect band gap decreased from 3·40 to 3·18 eV, possibly due to silicon contamination, residual thermal stress and/or the formation of midgap states from Fe doping.
ZhangW, ZhuR, KeL, LiuX, LiuB, RamakrishnaS: ‘Anatase mesoporous TiO2 nanofibers with high surface area for solid-state dye-sensitized solar cells’, Small, 2010, 6, 2176–2185.
2.
WenP, TaoZ, IshikawaY, ItohH, FengQ: ‘Dye-sensitized solar cells based on anatase TiO2 nanocrystals exposing a specific lattice plane on the surface’, Appl. Phys. Lett., 2010, 97, 131906.
3.
FoongTRB, ShenY, HuX, SellingeA: ‘Template-directed liquid ALD growth of TiO2 nanotube arrays: properties and potential in photovoltaic devices’, Adv. Funct. Mater., 2010, 20, 1390–1396.
4.
LiD, ChangP.-C, ChienC.-J, LuJG: ‘Applications of tunable TiO2 nanotubes as nanotemplate and photovoltaic device’, Chem. Mater., 2010, 22, 5707–5711.
5.
DholamR, PatelN, AdamiM, MiotelloA: ‘Hydrogen production by photocatalytic water-splitting using Cr- or Fe-doped TiO2 composite thin films photocatalyst’, Int. J. Hydrogen Energy, 2009, 34, 5337–5346.
6.
SongaraS, PatraMK, ManothM, SainiL, GuptaV, GowdGS, VaderaSR, KumarN: ‘Synthesis and studies on photochromic properties of vanadium doped TiO2 nanoparticles’, J. Photochem. Photobiol. A: Chem., 2010, 209A, 68–73.
7.
TakaokaGH, NoseT, KawashitaM: ‘Photocatalytic properties of Cr-doped TiO2 films prepared by oxygen cluster ion beam assisted deposition’, Vacuum, 2009, 83, 679–682.
SubramanianM, VijayalakshmiS, VenkatarajS, JayavelR: ‘Effect of cobalt doping on the structural and optical properties of TiO2 films prepared by sol–gel process’, Thin Solid Films, 2008, 516, 3776–3782.
ZhangW, ZhuS, LiY, WangF: ‘Photocatalytic Zn-doped TiO2 films prepared by DC reactive magnetron sputtering’, Vacuum, 2007, 82, 328–335.
12.
ChanM-H, LuF-H: ‘Characterization of N-doped TiO2 films prepared by reactive sputtering using air/Ar mixtures’, Thin Solid Films, 2009, 518, 1369–1372.
13.
BegumNS, Farveez AhmedHM, HussainOM: ‘Characterization and photocatalytic activity of boron-doped TiO2 thin films prepared by liquid phase deposition technique’, Bull. Mater. Sci., 2008, 31, 741–745.
14.
ShannonRD: ‘Revised effective ionic radii and systematic studies of interatomic distances in halides and chaleogenides’, Acta Crystallogr. A: Found. Crystallogr., 1976, 32A, 751–767.
15.
TakedaS, SuzukiS, OdakaH, HosonoH: ‘Photocatalytic TiO2 thin film deposited onto glass by DC magnetron sputtering’, Thin Solid Films, 2001, 392, 338–344.
16.
BourasP, StathatosE, LianosP: ‘Pure versus metal-ion-doped nanocrystalline titania for photocatalysis’, Appl. Catal. B: Environ., 2007, 73B, 51–59.
17.
HossainMF, BiswasS, TakahashiT, KubotaY, FujishimaA: ‘Investigation of sputter-deposited TiO2 thin film for the fabrication of dye-sensitized solar cells’, Thin Solid Films, 2008, 516, 7149–7154.
18.
SasakiT, BeckKM, KoshizukaN: ‘Preparation of Pt/TiO2 nanocomposite films by 2-beam pulsed laser deposition’, Appl. Surf. Sci., 2002, 197–198, 619–623.
19.
BaguerN, NeytsE, van GilsS, BogaertA: ‘Study of atmospheric MOCVD of TiO2 thin films by means of computational fluid dynamics simulations’, Chem. Vap. Deposition, 2008, 14, 339–346.
20.
AbdullahHZ, SorrellCC: ‘Preparation and characterisation of TiO2 thick films fabricated by anodic oxidation’, Mater. Sci. Forum, 2007, 561–565, 2159–2162.
21.
KimDJ, HahnSH, OhSH, KimEJ: ‘Influence of calcination temperature on structural and optical properties of TiO2 thin films prepared by sol–gel dip coating’, Mater. Lett., 2002, 57, 355–360.
22.
MahalingamS, EdirisingheMJ: ‘Novel preparation of nitrogen-doped titanium dioxide films’, J. Phys. D: Appl. Phys., 2008, 41D, 215406, 9 pp.
23.
NakarukA, RagazzonD, SorrellCC: ‘Anatase–rutile transformation through high-temperature annealing of titania films produced by ultrasonic spray pyrolysis’, Thin Solid Films, 2010, 518, 3735–3742.
24.
WangMC, LinHJ, YangTS: ‘Characteristics and optical properties of iron ion (Fe3+)-doped titanium oxide thin films prepared by a sol–gel spin coating’, J. Alloys Compd, 2009, 473, 394–400.
25.
WeillA, DechenauxE: ‘The spin-coating process mechanism related to polymer solution properties’, Polym. Eng. Sci., 1988, 28, 945–948.
26.
NakarukA, LinCY, PereraDS, SorrellCC: ‘Effect of annealing temperature on titania thin films prepared by spin coating’, J. Sol-Gel Sci. Technol., 2010, 55, 328–334.
27.
ZhangY, ShenY, GuF, WuM, XieY, ZhangJ: ‘Influence of Fe ions in characteristics and optical properties of mesoporous titanium oxide thin films’, Appl. Surf. Sci., 2009, 256, 85–89.
28.
JeongJ.-H, AhnJ.-H, KimB.-H: ‘Effect of Fe-doping on the crystallinity and the optical properties of TiO2 thin films’, J. Korean Phys. Soc., 2005, 46, 559–561.
29.
NakarukA, KaveiG, SorrellCC: ‘Synthesis of mixed-phase titania films by low-temperature ultrasonic spray pyrolysis’, Mater. Lett., 2010, 64, 1365–1368.
30.
YuJ.-G, YuH.-G, ChengB, ZhaoX.-J, YuJC, HoW.-K: ‘The effect of calcination temperature on the surface microstructure and photocatalytic activity of TiO2 thin films prepared by liquid phase deposition’, J. Phys. Chem. B, 2003, 107B, 13871–13879.
31.
MorrellR, ‘Handbook of properties of technical & engineering ceramics. Part 1: an introduction for the engineer and designer’; 1989, London, HMSO.
32.
ShandEB, ‘Glass engineering and handbook’; 1958, New York, McGraw-Hill Book Company
33.
ThomasR, DubeDC: ‘Optical properties of sol–gel processed amorphous and crystalline SrTiO3 thin films’, Jpn Appl. Phys., 2000, 39, 1771–1775.
34.
DuY, ZhangM.-S, WuJ, KangL, YangS, WuP, YinZ: ‘Optical properties of SrTiO3 thin films by pulsed laser deposition’, Appl. Phys. A, 2003, 76A, 1105–1108.
35.
KittelC: ‘Introduction to solid state physics’, 8th edn; 2005, New York, John Wiley & Sons.
36.
YuJ, YuH, AoCH, LeeSC, YuJC, HoW: ‘Preparation, characterization and photocatalytic activity of in situ Fe-doped TiO2 thin films’, Thin Solid Films, 2006, 496, 273–280.
37.
YuJ, XiangQ, ZhouM: ‘Preparation, characterization and visible-light-driven photocatalytic activity of Fe-doped titania nanorods and first-principles study for electronic structures’, Appl. Catal. B: Environ., 2009, 90B, 595–602.
