Hydroxyl terminated polybutadiene bound 2,2-methylenebis (4-methyl-6-tert-butylphenol) (HTPB–IPDI–MPH) was prepared by binding 2,2-methylenebis (4-methyl-6-tert-butylphenol) (MPH) onto hydroxyl terminated polybutadiene (HTPB) using isophorone diisocyanate (IPDI) as bridging agent. The structure of HTPB–IPDI–MPH was characterised by Fourier transform infrared spectroscopy, 1H nuclear magnetic resonance (NMR) spectroscopy, 13C NMR spectroscopy and gel permeation chromatography. The thermal stability of HTPB–IPDI–MPH was studied by thermal gravity analysis (TGA). The thermo-oxidative aging resistance of HTPB–IPDI–MPH for natural rubber (NR) vulcanizates was investigated by mechanical properties, cross-link density assessment and TGA, and then, possible mechanism of thermo-oxidative aging resistance of HTPB–IPDI–MPH for NR was proposed. The results showed that HTPB–IPDI–MPH had better thermal stability than the corresponding low molecular antioxidant MPH. The thermo-oxidative aging resistance and thermo-oxidative degradation of NR vulcanizates containing HTPB–IPDI–MPH were better than that of NR vulcanizates containing MPH obviously, indicating that the synergetic effect of phenolic –OH and –NHCOO– groups existed in HTPB–IPDI–MPH, which could enhance ability to scavenge free radical.
ElizabethK. I., AlexR., and VargheseS.: Evaluation of blends of natural rubber and hydrogenated nitrile rubber containing chemically modified natural rubber’, Plast. Rubber Compos., 2008, 37, 359–366. doi: 10.1179/174328908X314343
2.
AlexR., SasidharanK. K., KurianT., and ChandraA. K.: ‘Carbon black master batch from fresh natural rubber latex’, Plast. Rubber Compos., 2011, 40, 420–424.
3.
ZhouM. H., HoangT., KimI. G., HaC. S., and ChoW. J.: ‘Synthesis and properties of natural rubber modified with stearyl methacrylate and divinylbenzene by graft polymerization’, J. Appl. Polym. Sci., 2001, 79, 2464–2470. doi: 10.1002/1097-4628(20010328)79:13<2464::AID-APP1054>3.0.CO;2-N
4.
WilenC. E. and NasmanJ. H.: ‘Polar activation in copolymerization of propylene and 6-tert-butyl-[2-(1,1-dimethylhept-6-enyl)]-4-methylphenol over a racemic [1,1’-(dimethylsilylene)bis(.eta.5-4,5,6,7-tetrahydro-1-indenyl)]zirconium dichloride/methylalumoxane catalyst system’, Macromolecules, 1994, 27, 4051–4057. doi: 10.1021/ma00093a004
5.
Al-MalaikaS.: ‘Mechanisms of antioxidant action and stabilisation technology-the aston experience’, Polym. Degrad. Stab., 1991, 34, 1–36. doi: 10.1016/0141-3910(91)90109-5
6.
BellasR., DiezJ., RicoM., BarralL., RamirezC., and MonteroB.: ‘Accelerated ageing of styrene-butadiene rubber nanocomposites stabilized by phenolic antioxidant’, Polym. Compos., 2014, 35, 334–343. doi: 10.1002/pc.22666
7.
BertoldoM. and CiardelliF.: ‘Water extraction and degradation of a sterically hindered phenolic antioxidant in polypropylene films’, Polymer, 2004, 45, 8751–8759.
8.
SpataforeR. and PearsonL. T.: ‘Migration and blooming of stabilizing antioxidants in polypropylene’, Polym. Eng. Sci., 1991, 31, 1610–1617. doi: 10.1002/pen.760312209
9.
PospíšilJ. and WeideliH. J.: ‘Environmental impacts associated with the application of radical-scavenging stabilizers in polymers’, Polym. Degrad. Stab., 1996, 52, 109–117. doi: 10.1016/0141-3910(96)00011-0
10.
WilénC. E., LuttikheddeH., HjertbergT., and NäsmanJ. H.: ‘Copolymerization of ethylene and 6-tert-butyl-2-(1,1-dimethylhept-6-enyl)-4-methylphenol over three different metallocene-alumoxane catalyst systems’, Macromolecules, 1996, 29, 8569–8575.
11.
XueB., OgataK., and ToyotaA.: ‘Synthesis and radical scavenging ability of new polymers from sterically hindered phenol functionalized norbornene monomers via ROMP’, Polymer, 2007, 48, 5005–5015.
12.
XueB., OgataK., and ToyotaA.: ‘Synthesis of polymeric antioxidants based on ring-opening metathesis polymerization (ROMP) and their antioxidant ability for preventing polypropylene (PP) from thermal oxidation degradation’, Polym. Degrad. Stab., 2008, 93, 347–352. doi: 10.1016/j.polymdegradstab.2007.12.001
13.
El-WakilA. A.: ‘Amelioration of acrylonitrile-butadiene copolymer properties using natural rubber graft p-aminophenol’, J. Appl. Polym. Sci., 2007, 104, 27–34. doi: 10.1002/app.25727
14.
Al-GhonamyA. I., El-WakilA. A., and RamadanM.: ‘Enhancement the thermal stability and the mechanical properties of acrylonitrile-butadiene copolymer by grafting antioxidant’, Int. J. Polym. Sci., 2010, 2010, 1–7.
15.
VikramT. and NandoG. B.: ‘Synthesis and characterization of cardanol-grafted natural rubber-the solution technique’, J. Appl. Polym. Sci., 2007, 105, 1280–1288. doi: 10.1002/app.24714
16.
KataokaT., ZetterlundP. B., and YamadaB.: ‘Prevention of rubber degradation by use of microencapsulated antioxidants’, Rubber Chem. Technol., 2003, 76, 948–956. doi: 10.5254/1.3547783
17.
GaoX. W., MengX. F., WangH. T., WenB., DingY. F., ZhangS. M., and YangM. S.: ‘Antioxidant behaviour of a nanosilica-immobilized antioxidant in polypropylene’, Polym. Degrad. Stab., 2008, 93, 1467–1471. doi: 10.1016/j.polymdegradstab.2008.05.009
18.
ChenJ., YangM. S., and ZhangS. M.: ‘Immobilization of antioxidant on nanosilica and the aging resistance behavior in polypropylene’, Compos. Part A: Appl. Sci. Manuf., 2011, 42, 471–477. doi: 10.1016/j.compositesa.2011.01.006
19.
GaoX., HuG., QianZ., DingY., ZhangS., WangD., and YangM.: ‘Immobilization of antioxidant on nanosilica and the antioxidative behavior in low density polyethylene’, Polymer, 2007, 48, 7309–7315. doi: 10.1016/j.polymer.2007.10.015
20.
DongQ., DingY., WenB., WangF., DongH., ZhangS., WangT., and YangM.: ‘Improvement of thermal stability of polypropylene using DOPO-immobilized silica nanoparticles’, Colloid. Polym. Sci., 2012, 290, 1371–1380. doi: 10.1007/s00396-012-2631-0
21.
LeiH., HuangG., and WengG.: ‘Synthesis of a new nanosilica-based antioxidant and its influence on the anti-oxidation performance of natural rubber’, J. Macromol. Sci. B, 2012, 52, 84–94. doi: 10.1080/00222348.2012.695560
22.
GuoL., LeiH., ZhengJ., HuangG., and LiG.: ‘Synthesis of nanosilica-based immobile antioxidant and its antioxidative efficiency in SBR composites’, Polym. Compos., 2013, 34, 1856–1862. doi: 10.1002/pc.22591
23.
PodešvaJ., KovářováJ., HrdličkováM., and NetopilíkM.: ‘Stabilization of polyurethanes based on liquid OH-telechelic poly-butadienes: comparison of commercial and polymer-bound antioxidants’, Polym. Degrad. Stab., 2009, 94, 647–650. doi: 10.1016/j.polymdegradstab.2009.01.003
24.
PodešvaJ. and KovářováJ.: ‘Synthesis and performance of phenolic polybutadiene-bound stabilizers’, J. Appl. Polym. Sci., 2003, 87, 885–889. doi: 10.1002/app.11342
25.
WangY. H., ZengX. R., LiH. Q., and GuoJ. H.: ‘Structural characterization of hydroxyl-terminated polybutadiene-bound 2, 2-thiobis(4-methyl-6-tert-butylphenol) and its thermo-oxidative aging resistance for natural rubber vulcanizates’, J. Macromol. Sci. B, 2012, 51, 1904–1920. doi: 10.1080/00222348.2012.664452
26.
WangY. H., ZengX. R., LiH. Q., and GuoJ. H.: ‘Studies on extraction resistance of hydroxyl terminated polybutadiene bound 2,2-thiobis(4-methyl-6-tert-butylphenol) in natural rubber vulcanizates’ Asian J. Chem., 2012, 24, 3217–3220.
27.
WangY. H., ZengX. R., LiH. Q., and GuoJ. H.: ‘Synthesis and thermo-oxidative aging resistance of hydroxyl terminated polybutadiene bound 2,2-thiobis(4-methyl-6-tert-butylphenol)’, Polym-Plast Technol., 2012, 51, 1006–1013. doi: 10.1080/03602559.2012.680567
28.
FloryP. J. and RehnerJ.: ‘Statistical mechanics of cross-linked polymer networks II. Swelling’, J. Chem. Phys., 1943, 11, 521–526. doi: 10.1063/1.1723792
29.
LiM. C., GeX., and ChoU. R.: ‘Mechanical performance, water absorption behavior and biodegradability of poly(methyl methacrylate)-modified starch/SBR biocomposites’, Macromol. Res., 2013, 21, 793–800. doi: 10.1007/s13233-013-1088-4
30.
FloryP. J.: ‘Statistical mechanics of swelling of network structures’, J. Chem. Phys,. 1950, 18, 108–111. doi: 10.1063/1.1747424
ShankarR. M., RoyT. K., and JanaT.: ‘Terminal functionalized hydroxyl-terminated polybutadiene: an energetic binder for propellant’, J. Appl. Polym. Sci., 2009, 114, 732–741. doi: 10.1002/app.30665
33.
FlorianP., JenaK. K., AllauddinS., NarayanR., and RajuK. V. S. N.: ‘Preparation and characterization of waterborne hyper-branched polyurethane-urea and their hybrid coatings’, Ind. Eng. Chem. Res., 2010, 49, 4517–4527. doi: 10.1021/ie900840g
34.
ChoB. S. and NohS. T.: ‘Thermal properties of polyurethane binder with 2-(ferrocenylpropyl)dimethylsilane-grafted hydroxyl-terminated polybutadiene’, J. Appl. Polym. Sci., 2011, 121, 3560–3568. doi: 10.1002/app.34151
35.
WangQ. F., ZhangX. W., WangL., and MiZ. T.: ‘Kinetics of epoxidation of hydroxyl-terminated polybutadiene with hydrogen peroxide under phase transfer catalysis’, Ind. Eng. Chem. Res, 2009, 48, 1364–1371. doi: 10.1021/ie800875h
36.
AmrollahiM. and SadeghiG. M. M.: ‘Evaluation of adhesion strength, flammability, and degradation of HBCD-containing polyurethane adhesives’, J. Appl. Polym. Sci., 2008, 110, 3538–3543. doi: 10.1002/app.28913
37.
CoutinhoF. M. B., DelpechM. C., and AlvesL. S.: ‘Anionic waterborne polyurethane dispersions based on hydroxyl-terminated polybutadiene and poly(propylene glycol): synthesis and characterization’, J. Appl. Polym. Sci., 2001, 80, 566–572. doi: 10.1002/1097-4628(20010425)80:4<566::AID-APP1131>3.0.CO;2-H
38.
El-WakilA. A.: ‘Synthesis, characterization, and evaluation of natural rubber-graft-N-(4-aminodiphenyl methane) acrylamide as an antioxidant’, J. Appl. Polym. Sci., 2006, 101, 843–849. doi: 10.1002/app.23279
39.
LiS. D., WangC., XuK., and PengZ.: ‘Thermooxidative degradation of methyl methacrylate-graft-natural rubber’, J. Appl. Polym. Sci., 2003, 90, 1227–1232. doi: 10.1002/app.12669
