Extreme complexity in the range of polymer composition in waste printed circuit boards (WPCBs) will leave us to follow a series of steps to formulate an efficient recycling system. The current study deals with the recovery and utilisation of non-metallic fractions from WPCBs through dismantling, size reduction and sieve analysis. Density based techniques have been adopted in the current studies to separate the non-metallic fractions from metallic one due to its simplicity and cost effectiveness. The non-metallic fractions are quantified through sieve analysis and are utilised as reinforcing filler material in polypropylene matrix. Composite material with WPCBs has been prepared via melt blending techniques and is subjected to mechanical, thermal and morphological analysis to investigate its feasibility for automobile application.
BernardesA., BohlingerI., MilbrandtH. and WuthW.: ‘Recycling of printed circuit boards by melting with oxidizing/reducing top blowing process’ ‘Proc. TMS Annual Meet., Orlando, FL, USA, February’, 363–375, 1997, TMS.
2.
LiJ., LuH., GuoJ., XuZ. and ZhouY.: ‘Recycle technology for recovering resources and products from waste printed circuit boards’, Environ. Sci. Tech., 2007, 41, 1995–2000.
3.
HinoT., AgawaR., MoriyaY., NishidaM., TsugitaY. and ArakiT.: ‘Techniques to separate metal from waste printed circuit boards from discarded personal computers’, J. Mater. Cycles Waste Manage., 2009, 11, 42–54.
4.
GooseyM. and KellnerR.: ‘Recycling technologies for the treatment of end of life printed circuit boards (PCBs)’, Circuit World2003, 29, 33–37.
5.
SohailiJ., MuniyandiS. K. and MohamadS. S.: ‘A review on potential reuse of recovered nonmetallic printed circuit board waste’, J. Emerging Trends in Eng. App. Sci. (JETEAS) 2011, 2, 946–951.
6.
EswaraiahC., KavithaT., VidyasagarS. and NarayananS. S.: ‘Classification of metals and plastics from printed circuit boards (PCB) using air classifier’, Chem. Eng. Process. Process Intensification, 2008, 47, 565–576.
7.
GuoJ., GuoJ. and XuZ.: ‘Recycling of nonmetallic fractions from waste printec circuit boards: a review’, J. Hazard. Mater., 2009, 168, 567–590.
8.
SohailiJ., MuniyandiS. K. and MohamadS. S.: ‘A review on printed circuit board recycling technology’, J. Emerging Trends in Eng. App. Sci., 2012, 3, 12–18.
9.
LiW., ZhiY., DongQ., LiuL., LiJ., LiuS. and XieH.: ‘Research progress on the recycling technology for nonmetallic materials from waste printed circuit board’, Procedia Environ. Sci., 2012, 16, 569–575.
10.
PengM., DongX., XiaoyongP., LayidingW., GaoJ. and GuanghongD.: ‘New solutions for reusing nonmetals reclaimed from waste printed circuit boards’ Proc. 2005 IEEE Int. Symp. on ‘Electronics and the environment’, New Orleans, LA, USA, May 2005, IEEE, 205–209.
11.
PengM., DongX. and GuanghongD.: ‘Products made from nonmetallic materials reclaimed from waste printed circuit boards’, Tsinghua Sci. and Technol., 2007, 12, 276–283.
12.
WangX., GuoY., LiuJ., QiaoQ. and LiangJ.: ‘PVC-based composite material containing non-metallic printed circuit board (PCB) powders’, J. Environ. Manage., 2010, 91, 2505–2510.
13.
ZhengY., ShenZ., CaiC., MaS. and XingY.: ‘The reuse of nonmetals recycled from waste printed circuit boards as reinforcing fillers in the polypropylene composites, J. Hazard. Mater., 2009, 163, 600–606.
14.
ZhengY., ShenZ., CaiC., MaS. and XingY.: ‘Influence of nonmetals recycled from waste printed circuit boards on flexural properties and fracture behavior of polypropylene composites’, Mater. Des., 2009, 30, 958–963.
15.
OuY., YangF. and YuZ. Z.: ‘A new conception on the toughness of nylon 6/silica nanocomposite prepared via in situ polymerization’, J. Polym. Sci., 1998, 36B, 789–795.
16.
FuS. Y., FengX. Q., LaukeB. and MaiY. W.: ‘Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate-polymer composites’, Composites Part B, 2008, 39B, 933–961.
17.
ZhuZ. K., YangY., YinJ. and QiZ. N.: ‘Preparation and properties of organosoluble polyimide/silica hybrid materials by sol-gel process’, J. Appl. Polym. Sci., 1999, 73, 2977–2984.
18.
ChenY., ZhouS., YangH. and WuL.: ‘Structure and properties of polyurethane/nanosilica composites’, J. Appl. Polym. Sci., 2005, 95, 1032–1039.
19.
FuS. Y. and LaukeB.: ‘Analysis of mechanical properties of injection molded short glass fiber (SGF)/calcite/ABS composites’, J. Mater. Sci. Technol., 1997, 13, 389–396.
20.
FuS. Y. and LaukeB.: ‘Effects of fiber length and fiber orientation distributions on the tensile strength of short-fiber-reinforced polymers’, Compos. Sci. Technol., 1996, 56, 1179–1190.
21.
KarmarkarA., ChauhanS. S., ModakJ. M. and ChandaM.: ‘Mechanical properties of wood-fiber reinforced polypropylene composites: Effect of a novel compatibilizer with isocyanate functional group’, Composites Part A, 2007, 38A, 227–233.
22.
LeongY. W., IshakZ. A. Mohd. and AriffinA.: ‘Mechanical and thermal properties of talc and calcium carbonate filled polypropylene hybrid composites’, J. Appl. Polym. Sci., 2004, 91, 3327–3336.
23.
ChenX., YuJ. and GuoS.: ‘Structure and properties of polypropylene composites filled with magnesium hydroxide’, J. Appl. Polym. Sci. 2006, 102, 4943–4951.
24.
QiuW., MaiK., ZengH.: ‘Effect of silane-grafted polypropylene on the mechanical properties and crystallization behavior of talc/polypropylene composites’ J. Appl. Polym. Sci. 2000, 77, 2974–2977.
25.
MasirekR. and PiorkowskaE.: ‘Nucleation of crystallization in isotactic polypropylene and polyoxymethylene with poly (tetrafluoroethylene) particles’, Eur. Polym. J., 2010, 46, 1436–1445.
26.
AtaeefardM. and MoradianS.: Surface properties of polypropy-’lene/organoclay nanocomposites’, Appl. Surf. Sci., 2011, 257, 2320–2026.
27.
DaiX., ZhangZ., WangC., DingQ., JiangJ. and MaiK.: ‘Nucleation effect of montmorillonite with β-nucleating surface on polymorphous of melt-crystallized isotactic polypropylene nano-composites’, Compos. Sci. Technol., 2013, 89, 38–43.
28.
RahmanN. A., HassanA., YahyaR. and AragaR. A. L.: ‘Glass fiber and nanoclay reinforced polypropylene composites: Morphological, thermal and mechanical properties’, Sains Malays., 2013, 42 (4), 537–546.
29.
FornesT. D. and PaulD. R.: ‘Modeling properties of nylon 6/clay nanocomposites suing composite theories’ Polym., 2003, 44, 4993–5013.
