This study provides an assessment of the high temperature thermochemical reactions of ilmenite and chromite with sulphur and uses the information to analyse the possibility of selective sulphidation of chrome-bearing spinels as a new route for chromite removal from ilmenite concentrates. The work includes both systematic thermodynamic assessment and targeted experimental investigations. Thermodynamic calculation results studying the effect of reactants composition, temperature and different sulphur sources (H2S and elemental S) showed that chromite can be selectively sulphidised at a controlled atmosphere of partial pressure of oxygen (pO2) below 10−10 atm and partial pressure of sulphur (pS2) above 10−6 atm. The addition of carbon with sulphur was found to be useful for the chromite sulphidation reaction. The optimum quantity of sulphur reactant to carbon was found to be 3: 1 (in mole) for 1 mol of chromite. Sulphidation experiments on a mixture of natural ilmenite and chromite at 1100°C for 5 h using 5%H2S as a sulphur source showed that the ilmenite was preferentially sulphidised first, which was also in a good agreement with the thermodynamic assessment. Sulphidation of a naturally occurring chrome spinel contaminated ilmenite concentrate showed that the degree of weathering also played a role in the sulphidation of the chrome spinel. It was also concluded that H2S is not suitable for selective sulphidation of chrome spinel from the ilmenite concentrate and that tightly controlled pS2 and pO2 conditions are required.
BergeronM and PrestSF. 1976. Magnetic separation of ilmenite, US Patent 3, 935, 094.
3.
BhogeswaraDR, JacobKT and HowardGN. 1979. Corrosion of 310 stainless steel in H2–H2O–H2S gas mixtures: studies at constant temperature and fixed oxygen potential, NASA Technical Memorandum 81242, 1979.
4.
BorowiecK and RosenquistT. 1981. Phase relations and oxidation studies in the system Fe–Fe2O3–TiO2 at 700–1100°C, Scand J Metall., 10, (5), 217–224.
5.
ChenY, MarshM, WilliamsJS and NinhamB. 1996. Production of rutile from ilmenite by room temperature ball-milling-induced sulphurisation reaction, J. Alloys Compd., 245, (1–2), 54–58.
6.
CuiZ, LiuQ and EtsellTH. 2002. Magnetic properties of ilmenite, hematite and oils and minerals after roasting, Miner. Eng., 15, (12), 1121.
7.
Fisher-WhiteMJ, FreemanDE, GreyIE, LanyonMR, PowncebyMI and SparrowGJ. 2007. Removal of chrome spinels from Murray Basin ilmenites by low temperature roasting, Miner. Process. Extr. Metall., 116, (2), 123–132.
8.
GreyIE, Upgrading ilmenite for titanium production, 2002, W.I.P. Commonwealth Scientific and Industrial Research Organisation [AU/AU]; Limestone Avenue, Campbell, Australian Capital Territory 2612 (AU), Australia.
9.
Grey, I. E., Pownceby, M. and Sparrow, G. 2003. Rese arch on processing Murray Basin ilmenites. The AUSIMM Bulletin, 2, 12–18.
10.
GreyIE and LiC. 2001. Low-temperature roasting of ilmenite – phase chemistry and applications, International Heavy Minerals Conference 2001, Fremantle, Australia, 201–208.
11.
Grey, I. E., MacRae, C. and Nicholson, T. 1999. Al teration of ilmenite in the Murray Basin–implications for processing, Proceedings of Murray Basin Mineral Sands Conference, 129–138.
12.
GreyIE and MerrittRR. 1980. Phase equilibria for the system Fe0·394–Ti0·606–O–S at 1380 and 1485 K, J. Solid State Chem., 32, (1), 41–50.
13.
Grosz, A. E. 1987. Nature and distribution of poten tial heavy-mineral resources offshore of the Atlantic Coast of the United States. MAR. MIN., 6, (4), 339–357.
14.
HarbenPW. 2002. Titanium minerals and compounds, in PW Harben. The industrial minerals hand book, 4th edn, 356–365, Surrey, UK, IMIL. P.W. Harben is the author and Editor of the publication.
15.
ItohS, InoueO and AzakamiT. 1998. Phase relations and equilibrium oxygen partial pressures in iron–titanium–oxygen system at 1373 K, Mater. Trans., JIM, 39, (3), 391–398.
16.
ItohS, SatoS, OnoJ, OkadaHA and NagasakaT. 2006. Feasibility study of the new rutile extraction process from natural ilmenite ore based on the oxidation reaction, Metall. Mater. Trans. B., 37, (6), 979–985.
17.
JacobKT, RaoBD and NelsonHG. 1979. Phase relations in the Fe–Ni–Cr–S system and the sulfidation of an austenitic stainless steel, Oxid. Met., 13, (1), 25–55.
18.
KaleGM and JacobKT. 1992. Chemical potential of oxygen for iron–rutile–ilmenite and iron–ilmenite–ulvospinel equilibria, Metall. Trans. B, 23, (1), 57–64.
19.
KullerudG. 1959. Pyrite stability relations in the Fe–S system, Econ. Geol., 54, (4), 533.
20.
LeeCT, ChoiHS, RyooYH and SaekiY. 1983. Sulfidization of titaniferrous magnetite with sulfur dioxide in the presence of carbon (I), J. Korean Inst. Chem. Eng., 21, (3), 175–184.
21.
Merritt, R. R. and Cranswick, L. M. D. 1994. The or igin of magnetic susceptibility in roasted ilmenite. Proc. 6th AusIMM Extractive Metallurgy Co nference, 171–180.
22.
MerrittRR and TurnbullAG. 1974. A solid-state cell study of oxygen activities in the Fe–Ti–O system, J. Solid State Chem., 10, (3), 252–259.
23.
NaritaT, IshikawaT and NishidaK. 1987. Phase relations in an Fe–Cr–S system at temperatures of 1073 and 1173 K in the sulfur pressure range from 10° to 10−5 Pa, Oxid. Met., 27, (3), 239–252.
24.
Nell, J. 1999. An overview of the phase-chemistry involved in the production of high-titanium slag from ilmenite feedstock, Journal of the South African Institute of Mining and Metallurgy, 100, (1), 35–44.
25.
NellJ and Den HoedP. 1997. Separation of chromium oxides from ilmenite by roasting and increasing the magnetic susceptibility of Fe2O3–FeTiO3 (ilmenite) solid solutions, Proceedings of Heavy Minerals 1997, (R.E. Robinson), 75–78, Johannesburg, South African Institute of Mining and Metallurgy.
26.
PeslJ and RaufH. 1999. High-temperature phase relations and thermodynamics in the iron–titanium–oxygen system, Metall. Mater. Trans. B, 30, (4), 695–705.
27.
PowncebyM. 2005. Compositional and textural variation in detrital chrome-spinels from the Murray Basin, South Eastern Australia, Mineralogical Magazine, CSIRO Minerals, Clayton South, VIC, Australia, 191–204.
28.
PowncebyMI. 2010. Alteration and associated impurity element enrichment in detrital ilmenites from the Murray Basin, southeast Australia: a product of multistage alteration, Aust. J. Earth Sci., 57, (2), 243–258.
29.
PowncebyMI and Fisher-WhiteMJ. 2006. Chemical variability in chrome spinel grains from magnetically fractionated ilmenite concentrates: implications for processing, Miner. Process. Extr. Metall., 115, (4), 213–223.
30.
PowncebyMI, FreemanDE, Fisher-WhiteMJ and BruckardWJ. 2011. Sulfidisation of ilmenite concentrates contaminated with chrome spinels – a new approach to impurity separation, Eight International Heavy Minerals Conference, Perth, WA, 251–262.
31.
Reaveley, B. J. and Scanlon, T. J. 2001. Murray basin ilmenite-realising the value. Proc. International Heavy Minerals Conference 2001, 187–191.
32.
RoyPS, WhitehouseJ, CowellPJ and OakesG. 2000. Mineral sands occurrences in the Murray Basin, southeastern Australia, Econ. Geol., 95, (5), 1107–1128.
33.
SeyboltA. 1960. Observations on the Fe–Cr–O System, J. Electrochem. Soc., 107, (3), 147–156.
34.
Walpole, E. 1991. Improved process for separating ilmenite. Australian Patent 649441.
35.
WangY, YuanZ, GuoZ, TanQ, LiZ and JiangW. 2008. Reduction mechanism of natural ilmenite with graphite, Trans. Nonferrous Met. Soc. China, 18, (4), 962–968.
36.
WardCB. 1990. The production of synthetic rutile and by-product iron oxide pigments from ilmenite processing, School of Mathematical and Physical Sciences, Murdoch University, Perth, Western Australia.
37.
WelhamNJ. 1998. Mechanochemical reaction between sulfur and ilmenite, Aust. J. Chem., 51, (10), 947–953.
38.
Westcott, M. and Parry, L. 1968. Magnetic Properties of Some Beach Sand Ilmenite Particles. Journal of Geophysical Research, 73, (4), 1269–1277
39.
ZiemniakSE, AnovitzLM, CastelliRA and PorterWD. 2007. Thermodynamics of Cr2O3, FeCr2O4, ZnCr2O4, and CoCr2O4, J. Chem. Thermodyn., 39, (11), 1474–1492.
