Australia is a major world producer of heavy minerals from mineral sand deposits, but to maintain its premier position in the world market place, the development of large resources such as in the Murray Basin will be necessary. There are two types of deposits in the Murray Basin, the fine-grained (20–80 μm) WIM-type deposits and those with coarser mineralisation (90–300 μm), similar to other Australian deposits. Only the higher grade, coarse-grained deposits have been exploited, with little or no value realised from the majority ilmenite component because of its complex mineralogy.
Compositional data for ilmenites from deposits across the basin are presented and potential processing options for them taking into account the grain size, composition and impurity element contamination are discussed. In particular, processes to lower chromia levels and fluidised bed and kiln-based processes to upgrade weathered ilmenites to suitable pigment feedstocks are discussed. Recommendations regarding further research required to enable commercial development of Murray Basin ilmenites are given.
AhmadS, RhamdhaniMA, PowncebyMI and BruckardWJ. (2014). Thermodynamic assessment and experimental study of sulphidation of ilmenite and chromite. Transactions of the Institution of Mining and Metallurgy Section C – Mineral Processing and Extractive Metallurgy, 127, pp. 165–177.
2.
AralH, BruckardWJ, FreemanDE, GreyIE, HarrisHR, HouchinMR, McDonaldKJ and SparrowGJ. 1997. Radionuclide removal from Eneabba North ilmenite.In:RobinsonR E, ed. Heavy minerals 1997. Johannesburg: South African Institute of Mining and Metallurgy, pp. 137–142.
BecherRG, CanningRG, GoodheartBA and UusnaS. 1965. A new process for upgrading ilmenitic mineral sands.In:Proc. Aus. IMM, No: 214, June, pp. 21–43.
5.
BeukesJA and van NiekerkC. 1999. Chromite removal from crude ilmenite.In:StimsonR G, ed. Heavy minerals 1999. Johannesburg: South African Institute of Mining and Metallurgy, pp. 97–100.
6.
BracaninBF, CassidyPW, MacKayJM and HockinHW. 1972. The development of a direct reduction and leach process for ilmenite upgrading.In:RotsellW C, ed. Light metals 1972. New York: American Institute of Mining, Metallurgical, and Petroleum Engineers, pp. 209–259.
7.
BramdeoS and DunleveyJN. 1999. Mineral chemistry of rutile. In:StimsonR G, ed. Heavy minerals 1999. Johannesburg: South African Institute of Mining and Metallurgy, pp.63–5.
8.
BruckardWJ, CreedMD, HeyesGW and GuyPJ. 1999. Beneficiation of Australian mineral sands deposits using flotation. In:StewartR, ed. Murray Basin mineral sands, extended abstracts. Mildura: Australian Institute of Geoscientists, pp. 111–115(Bulletin No. 26).
9.
BulatovicSM. 2010. Flotation of titanium minerals. In:Handbook of flotation reagents, chemistry, theory and practice. Amsterdam: Elsevier, Vol. 2, pp. 175–207.
10.
DicksonTW. 1999. A history of exploration for heavy minerals in the Victorian section of the Murray Basin. In:StewartR, ed. Murray Basin mineral sands, extended abstracts. Mildura: Australian Institute of Geoscientists, pp.34–41(Bulletin No. 26).
11.
EllisBA, HarrisHR and HudsonRL. 1994. The reduction of radionuclides in titaniferous feedstocks. In:GriffithsJ B, ed. 11th ‘Industrial Minerals’ international congress. Surrey, UK: Industrial Minerals Division of Metal Bulletin plc, pp.102–8.
12.
EverettSC, SchacheIS, BaldersonGF and BannisterPA. 2003. Pooncarie project – the technical challenges. In:Heavy minerals 2003. Johannesburg: South African Institute of Mining and Metallurgy, pp.81–93.
13.
FarrellB, O'LoughlinN, JudkinsD, SlythP, HartS, McGuireT and RussellR. 2001. The Douglas project strandline systems, Wimmera region, western Victoria. In:International heavy minerals conference. Melbourne: The Australasian Mining and Metallurgy, Melbourne, pp. 19–27.
14.
FisherJR. 1997. Developments in the TiO2 pigments industry which will drive demand for TiO2 mineral feedstocks. In:RobinsonR E, ed. Heavy minerals 1997. Johannesburg: South African Institute of Mining and Metallurgy.
15.
Fisher-WhiteMJ, FreemanDE, GreyIE, LanyonMR, PowncebyMI and SparrowGJ. 2007. Removal of chrome spinels from Murray Basin ilmenites by low temperature roasting. Transactions of The Institution of Mining and Metallurgy Section C – Mineral Processing and Extractive Metallurgy, 116, pp.123–32.
16.
FreemanDE and SparrowGJ. 1999. Processing Murray Basin ilmenites. In:StewartR, ed. Murray Basin mineral sands, extended abstracts. Mildura: Australian Institute of Geoscientists, pp.125–8(Bulletin No. 26).
17.
GreyIE and LiC. 2001. Low temperature roasting of ilmenite – phase chemistry and applications. In:The AusIMM Proceedings, Vol. 306, pp. 35–42.
18.
GreyIE and LiC. 2003. Hydroxylian pseudorutile derived from picroilmenite in the Murray Basin, southeastern Australia. Mineralogical Magazine, 67(4), pp.733–47.
19.
GreyIE and ReidAR. 1974. Reaction sequences in the reduction of ilmenite: 3 – reduction in a commercial rotary kiln; an X-ray diffraction study. Transactions of The Institution of Mining and Metallurgy Section C – Mineral Processing and Extractive Metallurgy, 83, pp.C39–46.
20.
GreyI, MacRaeC and NicholsonT. 1999. Alteration of ilmenite in the Murray Basin – implications for processing. In:StewartR, ed. Murray Basin mineral sands, extended abstracts. Mildura: Australian Institute of Geoscientists, pp. 129–34(Bulletin No. 26).
21.
GreyIE, SteinikeK and MacRaeCM. 2013. Kleberite, Fe3+Ti6O11(OH)5, a new ilmenite alteration product, from Königshain, northeast Germany. Mineralogical Magazine, 77, pp.45–55.
22.
GuéguinM and CardarelliF. 2007. Chemistry and mineralogy of titania-rich slags. Part 1 – Hemo-ilmenite, sulphate, and upgraded titania slags. Mineral Process & Extractive Metallurgy Review, 28, pp.1–58.
23.
HallJS, CareyKG and HollittMJ. 1993. Microagglomeration of fine grain titania for TiCl4 production. In:6th International symposium on agglomeration, Nagoya, pp.692–7.
24.
HeyesGW, BruckardWJ and SmithLK. 2001. Flotation of chromite – a review with applications to upgrading chromium-contaminated ilmenite. In:International heavy minerals conference. Melbourne: The Australasian Institute of Mining and Metallurgy, pp.137–42.
25.
HollittMJ, GreyIE and O'BrienBA. 1990. Refining of ilmenite by removal of excess chromite, International Patent Application, WO 90/04656.
26.
HollittMJ, McClellandRA and LiddyMJ. 1992. Wimmera titanium minerals developments – earth, wind, fire and water.In:NilmaniM and RankinW J, eds. Mervyn Willis symposium and smelting & refining course. Australia: University of Melbourne, 19:1–19:2.
27.
HollittMJ, McClellandRA and TuffleyJR. 1994. Upgrading titaniferous materials, PCT International Patent Application, WO 94/04709.
28.
HollittMJ, McClellandRA, McIntyreSV and SmartJ. 1994. The CRA rutile process, implications for titania feedstock supply. In:GriffithsJ B, ed. 11th ‘Industrial Minerals’ international congress. Surrey, UK: Industrial Minerals Division of Metal Bulletin plc, pp.109–120.
29.
Iluka Resources Limited2002. Notice to the Australian stock exchange, 29th May 2002. Iluka Resources and Outokumpu-Lurgi Metallurgie announce major new advance in synthetic rutile production, 3 pp.
30.
Iluka Resources Limited, 2012. Product and technical development. In:Iluka Review 2012, p.21. Available at <http://www.iluka.com> [Accessed 5/9/14].
31.
LakshmananVI, SridharR and HainsDH. 2004. A novel hydrometallurgical process for very high purity TiO2 production. In:TaylorL, ed. 17th Industrial minerals international congress. Surrey, UK: Industrial Minerals, pp. 92–95.
32.
McCoyD, CoetzeeB, KeegalM and BenderE. 2011. Titanium feedstocks – opaque quality requirements. In:Eighth international heavy minerals conference. Melbourne: The Australasian Institute of Mining and Metallurgy, pp.197–203.
33.
McManusP. 2013. Overview of the Australasian mineral sands industry. In:RankinW J, ed. Australasian mining and metallurgical operating practices. 3rd ed. Melbourne: The Australasian Institute of Mining and Metallurgy, Vol. 2, pp.1687–91.
34.
MartinID and HockinHW. 1970. Production of anosovite from titaniferous minerals, US Patent 3, 502, 460.
35.
MasonAJ, TeakleM and BlanpainPA. 1998. Heavy mineral sand deposits, central Murray Basin. In:BerkmanD A and MackenzieD H, eds. Geology of Australian and Papua New Guinea mineral deposits. Melbourne: The Australasian Institute of Mining and Metallurgy, pp. 647–650.
36.
MerrittRR and CranswickLMD. 1994. The origin of magnetic susceptibility in roasted ilmenite. In:6th AusIMM extractive metallurgy conference. Melbourne: The Australasian Institute of Mining and Metallurgy, pp.171–180.
MudgeS and TeakleM. 2003. Geophysical exploration for heavy-mineral sands near Mindarie, South Australia. In:Geophysical signatures of South Australian mineral deposits, ASEG Extended Abstracts, pp.249–55.
41.
NellJ and denHoed, P. 1997. Separation of chromium oxides from ilmenite by roasting and increasing the magnetic susceptibility of Fe2O3-FeTiO3 (ilmenite) solid solutions. In:RobinsonR E, ed. Heavy minerals 1997. Johannesburg: South African Institute of Mining and Metallurgy, pp. 75–8.
42.
NicholsonTA, GreyIE and BrownCJ. 2000. Production of synthetic rutile by low temperature reduction of ilmenite, Australian Patent 3676099.
43.
OllettJ. 2012. Argex develops new titanium dioxide process for ilmenite. Industrial Minerals, 537, pp.30–31.
44.
PaineM. 2005. Sedimentology of the Bondi Main heavy mineral beach placer deposit, Murray Basin, southeastern Australia. Sedimentary Geology, 174, pp.177–95.
PistoriusPC. 2008. Ilmenite smelting: the basics. Journal of the South African Institute of Mining and Metallurgy, 108, pp.35–43.
47.
PoppAW. 2005. Murray Basin heavy mineral strandline deposit mineralogy. In:AskerM and ElderJ, eds. Heavy minerals 2005. Littleton, Colorado: Society for Mining, Metallurgy and Exploration, Inc., pp.91–102
48.
PorterR. 2013. Murray Basin site visit, September 2013.Available at <http://www.iluka.com> Company presentations [Accessed 5/9/14].
49.
PowncebyM. 2005. Compositional and textural variation in detrital chrome-spinels from the Murray Basin, southeastern Australia. Mineralogical Magazine, 69, pp.191–204.
50.
PowncebyMI. 2010. Alteration and associated impurity element enrichment in detrital ilmenites from the Murray Basin, southeast Australia: a product of multistage alternation. Australian Journal of Earth Sciences, 57, pp.243–258.
51.
PowncebyMI. (2014). The fate of chromium impurities during acid sulphate digestion of ilmenite concentrates, International Journal of Mineral Processing, 133, pp. 73–82.
52.
PowncebyMI and BourneP. 2006. Detrital chrome-spinel grains in heavy-mineral sand deposits from southeast Africa. Mineralogical Magazine, 70, pp.51–64.
53.
PowncebyM, MacRaeC and WilsonN. 2001. Electron microprobe mapping – a diagnostic tool for ilmenite characterisation. In:International heavy minerals conference. Melbourne: The Australasian Institute of Mining and Metallurgy, pp.69–74.
54.
PowncebyMI, Fisher-WhiteMJ, MacRaeCM, WilsonNC and SparrowGJ. 2003. Characterisation and distribution of chrome spinel grains in magnetically fractionated ilmenite concentrates. In:Heavy minerals 2003. Johannesburg: South African Institute of Mining and Metallurgy, pp.175–83.
55.
PowncebyMI, SparrowGJ and Fisher-WhiteMJ. 2008. Mineralogical characterization of Eucla Basin ilmenite concentrates – first results from a new global resource. Minerals Engineering., 21, pp.587–97.
56.
PowncebyMI, FreemanDE, Fisher-WhiteMJ and BruckardWJ. 2011. Sulfidisation of ilmenite concentrates contaminated with chrome spinels – a new approach to impurity separation. In:Eighth international heavy minerals conference. Melbourne: The Australasian Institute of Mining and Metallurgy, pp.251–62.
57.
ReaveleyBJ and ScanlonTJ. 2001. Murray Basin ilmenite – realising the value. In:International heavy minerals conference. Melbourne: The Australian Institute of Mining and Metallurgy, pp.187–91.
58.
RolfePF. 1973. The modified metallurgical upgrading of ilmenite to produce high grade synthetic rutile. In:The Aus. I.M.M. conference Western Australia. Melbourne: Australian Institute of Mining and Metallurgy, pp.443–53.
59.
RoyPS and WhitehouseJ. 2003. Changing pliocene sea levels and the formation of heavy minerals beach placers in the Murray Basin, southeastern Australia. Economic Geology, 98, pp.975–83.
60.
RoyPS, WhitehouseJ, CowellPJ and OakesG. 2000. Mineral sands occurrences in the Murray Basin, southeastern Australia. Economic Geology, 95, pp.1107–28.
61.
ShekiroJM, BarnesJJ, HillP, LiuG, LykeSE and NguyenD. 2011. TiRON – a new process for the production of high-grade feedstock for TiO2 pigment manufacture. In:Eighth international heavy mineral conference. Melbourne: The Australian Institute of Metallurgy, pp.283–93.
62.
SinhaHN. 1975. The Murso synthetic rutile process. In:Light metals 1975. New York: Metallurgical Soc., Amer. Inst. Min. Metall, and Pet. Engns, Vol. 1, pp.367–76.
63.
SircombeKN. 1999. Tracing provenance through the isotope ages of littoral and sedimentary detrital zircon, eastern Australia. Sedimentary Geology, 124, pp.47–67.
64.
SmithLK and BruckardWJ. 2002. Flotation of chrome spinels from ilmenite – summary report, unpublished results.
65.
SparrowGJ, PowncebyMI, GreyIE, PatrickTRC, WilsonNC and MacRaeCM. 2000. Chromite problem of Murray Basin ilmenites. In:Resources week 2000. Adelaide: Staffords Conference Management, Adelaide, pp.130–6[CD ROM].
66.
SparrowGJ, PowncebyMI, SmithLK, BruckardWJ., 2014. Unpublished report for the Victorian. Department of State Development, Business and Innovation, 119 pp.
67.
VerhulstD, SabackyB, SpitlerT and DuyvesteynW. 2002. The Altair TiO2 pigment process and its extension into the field of nanomaterials. CIM Bulletin, 95(1065), pp.89–94.
68.
WalpoleEA. 1997. The Austpac ERMS and EARS processes. A cost effective route to high grade synthetic rutile and pigment grade TiO2. In:RobinsonR E, ed. Heavy minerals 1997. Johannesburg: South African Institute of Mining and Metallurgy, pp.169–174.
69.
WalpoleEA. 1999. Synthetic rutile production from Murray Basin ilmenite by the Austpac ERMS process, In:StewartR, ed. Murray Basin mineral sands, extended abstracts. Mildura: Australian Institute of Geoscientists, pp.164–8(Bulletin No. 26).
70.
WalpoleEA and WinterJD. 2002. The Austpac ERMS and EARS processes for the manufacture of high-grade synthetic rutile by the hydrochloric acid leaching of ilmenite. In:PeekE and Van WeertG, eds. Chloride metallurgy 2002. Montreal: Metallurgical Society of the Canadian Institute of Mining, Metallurgy and Petroleum, Vol. II, 401–415.
71.
WilliamsVA. 1990. WIM 150 detrital heavy mineral deposit. In:HughesF E, ed. Geology of the mineral deposits of Australia and Papua New Guinea. Melbourne: The Australasian Institute of Mining and Metallurgy, pp.1609–14.
72.
WilliamsGE and SteenkampJD. 2006. Heavy mineral processing at Richards bay minerals. In:JonesR T, ed. Southern African pyrometallurgy 2006. Johannesburg: South African Institute of Mining and Metallurgy, pp.181–188.
73.
WinterJD. 1999. ERMS roasting process: technology for the separation of high grade ilmenite from Murray Basin heavy mineral concentrate. In:StewartR, ed. Murray basin mineral sands, extended abstracts. Mildura: Australian Institute of Geoscientists, pp. 169–171(Bulletin No. 26).
