It is still a matter to get thick self-lubricating coating with good tribological properties and strong bond. In the present work, Cu/BN coating was produced by electrospark deposition on mild steel. Chemical compatibility of Cu/BN/steel was analysed. The effects of the electric capacitance and deposition time on coating performance were studied, and the microscopic morphologies and structure of the coating were analysed. The results showed that there were no reactions in Cu/BN/steel. With the increase in capacitance, the surface roughness, friction coefficient and wear mass loss all increased. With the increase in deposition time, the surface roughness increased. Scanning electron microscope images showed that the lubricating coating is smooth, and thick coating (∼100 μm) was formed with metallurgical bond.
BadischE, MittererC, MayrhoferPH, MoriG, BakkerRJ, BrennerJ and StöriH: ‘Characterization of tribo-layers on self-lubricating plasma-assisted chemical-vapor-deposited TiN coatings’, Thin Solid Films, 2004, 460, 125–132.
6.
DengJ, LiuJ, ZhaoJ, SongW and NiuM: ‘Friction and wear behaviors of the PVD ZrN coated carbide in sliding wear tests and in machining processes’, Wear, 2008, 264, 298–307.
7.
DeepthiB, BarshiliaHC, RajamKS, KonchadyMS, PaiDM and SankarJ: ‘Structural, mechanical and tribological investigations of sputter deposited CrN–WS2 nanocomposite solid lubricant coatings’, Tribol. Int., 2011, 44, 1844–1851.
8.
IncertiL, RotaA, ValeriS, MiguelA, GarcíaJA, RodríguezRJ and OsésJ: ‘Nanostructured self-lubricating CrN–Ag films deposited by PVD arc discharge and magnetron sputtering’, Vacuum, 2011, 85, 1108–1113.
9.
WangY: ‘Nano- and submicron-structured sulfide self-lubricating coatings produced by thermal spraying’, Tribol. Lett., 2004, 17, 165–168.
10.
ZhangX.-F, ZhangX.-L, WangA.-H and HuangZ.-W: ‘Microstructure and properties of HVOF sprayed Ni-based submicron WS2/CaF2 self-lubricating composite coating’, Trans. Nonferr. Met. Soc. China, 2009, 19, 85–92.
11.
YanH, ZhangJ, ZhangP, YuZ, LiC, XuP and LuY: ‘Laser cladding of Co-based alloy/TiC/CaF2 self-lubricating composite coatings on copper for continuous casting mold’, Surf. Coat. Technol., 2013, 232, 362–369.
12.
LiuX.-B, ZhengC, LiuY.-F, FanJ.-W, YangM.-S and HeX.-M: ‘A comparative study of laser cladding high temperature wear-resistant composite coating with the addition of self-lubricating WS2 and WS2/(Ni–P) encapsulation’, J. Mater. Process. Technol., 2013, 213, 51–58.
13.
HanadaK, ShojiT, MayuzumiM and SanoT: ‘Development of self-lubricating titania/diamond nanoparticle composite’, Mater. Sci. Technol., 2004, 20, 1103–1108.
14.
PimentelJV, PolcarT and CavaleiroA: ‘Structural, mechanical and tribological properties of Mo–S–C solid lubricant coating’, Surf. Coat. Technol., 2011, 205, 3274–3279.
15.
LešnjakA and TušekJ: ‘Processes and properties of deposits in electrospark deposition’, Sci. Technol. Weld. Join., 2002, 7, 391–396.
16.
LiuD, GaoW, LiZ, ZhangH and HuZ: ‘Electro-spark deposition of Fe-based amorphous alloy coatings’, Mater. Lett., 2007, 61, 165–167.
17.
ChengL, DongS.-J and XiangX: ‘Microstructure and properties of TiC coating by vibrating electrospark’, Key Eng. Mater., 2008, 373–374, 180–183.
18.
ShemegonV: ‘Effect of electrode material on formation of electrospark coatings on cutting tools and equipment parts’, Met. Sci. Heat Treat., 2007, 49, 457–461.
19.
PodchernyaevaIA, PanasyukAD, YurechkoDV and TalashVN: ‘Spark-deposited coatings on magnesium alloys’, Powder Metall. Met. Ceram., 2010, 49, 55–60.
20.
XueJC, DangLT, ZhangJ, TangCB, GaoY and GaoB: ‘Effect of electrospark deposited surface layers on bond strength of titanium-porcelain’, Mater. Sci. Technol., 2014, DOI 10.1179/1743284714Y.0000000529
21.
TkachenkoYuG, YurchenkoDZ, BritunVF, IsaevaLP and VarchenkoVT: ‘Structure and properties of wear-resistant spark-deposited coatings produced with a titanium carbide alloy anode’, Powder Metall. Met. Ceram., 2013, 52, 306–313.
22.
JingQ and TanY: ‘Microstructure and tribological properties of cobalt-based Stellite 6 alloy coating by electro-spark deposition’, Mater. Res., 2013, 16, 1071–1076.
23.
SalihD, LeventAS and KemalK: ‘Characterization and mechanical properties of the duplex coatings produced on steel by electro-spark deposition and micro-arc oxidation’, Surf. Coat. Technol., 2013, 236, 303–308.
24.
ZhangS, ZhouJ, GuoB, ZhouH, PuY and ChenJ: ‘Friction and wear behavior of laser cladding Ni/h-BN self-lubricating composite coating’, Mater. Sci. Eng. A, 2008, A491, 47–54.
25.
NiuM, BiQ, ZhuS, YangJ and LiuW: ‘Microstructure, phase transition and tribological performances of Ni3Si-based self-lubricating composite coatings’, J. Alloys Compd, 2013, 555, 367–374.
26.
DuH, SunC, HuaW, WangT, GongJ, JiangX and LeeSW: ‘Structure, mechanical and sliding wear properties of WC–Co/MoS2–Ni coatings by detonation gun spray’, Mater. Sci. Eng. A, 2007, A445–A446, 122–134.
27.
KimuraY, WakabayashiT, OkadaK, WadaT and NishikawaH: ‘Boron nitride as a lubricant additive’, Wear, 1999, 232, 199–206.
28.
LippA, SchwetzKA and HunoldK: ‘Hexagonal boron nitride: Fabrication, properties and applications’, J. Eur. Ceram. Soc., 1989, 5, 3–9.
29.
ZhangY, LiJ, XiongD and QinY: ‘Influence of boron nitride on tribological behavior of nickel-base composite coatings at high temperature’, Mater. Sci. Forum, 2011, 686, 711–715.
30.
YanH, WangAH, ZhangXL, HuangZW, WangWY and XieJP: ‘Nd: YAG laser cladding Ni base alloy/nano-h-BN self-lubricating composite coatings’, Mater. Sci. Technol., 2010, 26, 461–468.
31.
NingF: ‘Design and development of composite ceramic cutting tool materials based on the cutting reliability’, PhD thesis, Shandong University, Jinan, China, 2001.
32.
SureJ, MishraM, TariniM, Ravi ShankarA, KrishnaNG and KuppusamiP: ‘Microstructural characterization and chemical compatibility of pulsed laser deposited yttria coatings on high density graphite’, Thin Solid Films, 2013, 544, 218–223.
