The origin of the preferred orientations observed in the columnar grains of fcc and hcp metals under conditions of both planar and dendritic interface growth is considered. The preferred orientations are explained in terms of competitive growth of chill grains normal to the chill surface and by assuming that the chill grains grow in a dendritic manner.
BollingG. F., KramerJ. J. and TillerW. A.: Trans. AIME, 1963, 227, 47–51.
4.
ChadwickG. A.: Met. Set J., 1967, 1, 132–138.
5.
HellawellA. and HerbertP. M.: Proc. R Soc. (London) A, 1962, 269A, 560–573.
6.
BowerT. F. and FlemingsM. C.: Trans. AIME, 1967, 239, 1620–1625.
7.
SchmidE. and WassermannG.: Z. Metallkd., 1928, 20, 370–377.
8.
NixF. C. and SchmidE.: Z Metallkd., 1929, 21, 286–292.
9.
BravaisA.: Etud. Crystallogr., Paris, 1866, 168.
10.
WaltonD. and ChalmersB.: Trans. AIME, 1959, 215, 447–456.
11.
WeinbergF. and ChalmersB.: Can. J. Phys., 1952, 30, 488–502.
12.
RosenbergA. and TillerW. A.: Acta Metall., 1957, 5, 565–573.
13.
ElbaumC. and ChalmersB.: Can. J. Phys., 1955, 33, 196.
14.
TillerW. A.: Trans. Am. Inst. Min. Metall. Eng., 1957, 209, 847.
15.
ChadwickG. A.: Acta Metall., 1962, 10, 1–12.
16.
JacksonK. A.: in ‘Liquid metals and solidification’, 174; 1958, Cleveland, OH, American Society for Metals.
17.
BlakeN. W., HamesF. A. and SmithR. W.: in ‘Rapidly solidified amorphous and crystalline alloys’, 363; 1982, Barking, Essex, UK, Elsevier Science Publishers.
18.
KlangH. and KiusalassR.: in ‘Solidification processing 1987’, Book 421, 361-364; 1988, London, The Institute of Metals.
19.
WallN. J., SpittleJ. A. and JonesR. D.: in Intergalva 85, 1st Int. ‘Zinc coated sheet’ Conf., Munich, Germany, June 1985, Zinc Development Association, C/1—C/6.
20.
ElvinsJ.: PhD thesis, School of Engineering, University of Wales Swansea, UK.
