The effect of chloride ions’ presence (0·005-1·0M NaCl) in phosphoric acid solutions (5, 40 and 75%) on the corrosion behaviour of three austenitic stainless steels (an experimental steel Fe–18Cr–12Mn–0·6N and two trade grades, Fe–18Cr–9Ni and Fe–14Cr–15Mn–0·2N) has been studied by potentiodynamic polarisation measurements. The surface examinations of the samples tested involved X-ray photoelectron spectroscopy as well as optical and scanning electron microscopy. It was established that chlorides added to phosphoric acid solutions deteriorate the general corrosion resistance, and under anodic polarisation, they provoke pitting corrosion. The composition of the stainless steels significantly influences its corrosion behaviour in the phosphoric acid solutions containing chloride ions. The replacement of nickel with manganese and nitrogen on top of lower chromium content has a strong negative effect on the corrosion resistance.
RashevT. V.: ‘High nitrogen steels, metallurgy under pressure’Publishing House of the Bulgarian Academy of Science ‘Prof. Marin Drinov’, Sofia; 1995.
2.
RajB. and MudaliU. K.: ‘High nitrogen steels and stainless steels, manufacturing, properties and applications’; 2005NarosaNew Delhi.
3.
Abdel-AalM. S. and HermasA. A.: ‘Anodic polarization behaviour of cast iron alloys in deaerated concentrated H3PO4 solutions containing Cl− and F− ions’J. Appl. Electrochem., 200030339–345. doi: 10.1023/A:1003903806668
4.
IkenH.BasseguyR.GuenbourA. and Ben BachirA.: ‘Classic and local analysis of corrosion behaviour of graphite and stainless steel in polluted phosphoric acid’Electrochim. Acta2007522580–2587. doi: 10.1016/j.electacta.2006.09.013
5.
PrabakaranK. and RajeswariS.: ‘Electrochemical, SEM and XPS investigations on phosphoric acid treated surgical grade type 316L SS for biomedical applications’J. Appl. Electrochem., 200939887–897. doi: 10.1007/s10800-008-9738-5
6.
El DahanH. A.: ‘Pitting corrosion inhibition of 316 stainless steel in phosphoric acid–chloride solutions. Part I: potentiodynamic and potentiostatic polarization studies’J. Mater. Sci., 199934851–857. doi: 10.1023/A:1004545501971
7.
El DahanH. A.: ‘Pitting corrosion inhibition of 316 stainless steel in phosphoric acid–chloride solutions. Part II: AES investigation’J. Mater. Sci., 199934859–868. doi: 10.1023/A:1004597518809
8.
GuenbourA.BuiN.FaucheuJ.SeguiY.Ben BachirA. and DabosiF.: ‘The electrical properties of passive films formed on stainless steels in phosphoric acids’Corros. Sci., 199030189–199. doi: 10.1016/0010-938X(90)90073-E
9.
ZhangT. C.JiangX. X. and LiS. Z.: ‘Acceleration of corrosive wear of duplex stainless steel by chloride in 69% H3PO4 solution’Wear1996199253–259. doi: 10.1016/0043-1648(96)06982-7
10.
Escrivà-CerdánC.Blasco-TamaritE.García-GarcíaD. M.García-AntónJ. and GuenbourA.: ‘Passivation behaviour of alloy 31 (UNS N08031) in polluted phosphoric acid at different temperatures’Corros. Sci., 201256114–122. doi: 10.1016/j.corsci.2011.11.014
11.
BenSalahM.SabotR.TrikiE.DhouibiL.RefaitPh. and JeanninM.: ‘Passivity of Sanicro28 (UNS N-08028) stainless steel in polluted phosphoric acid at different temperatures studied by electrochemical impedance spectroscopy and Mott–Schottky analysis’Corros. Sci., 20148661–70. doi: 10.1016/j.corsci.2014.04.056
12.
IdrissiH.: ‘Corrosion behaviour of two stainless steels and a chromium cast iron in phosphoric acid contaminated with S2 − ions’J. Mater. Sci., 1996314599–4602. doi: 10.1007/BF00366357
13.
El HajjajiS.AriesL.AudouardJ.-P. and DabosiF.: ‘The influence of alloying elements on the corrosion resistance of stainless steels in phosphoric acid medium polluted by sulphide ions’Corros. Sci., 199537927–939. doi: 10.1016/0010-938X(95)00005-5
14.
NassifN.: ‘Influence of impurities in phosphoric acid on the corrosion resistance of some commercially produced alloys’Surf. Technol., 198526189–198. doi: 10.1016/0376-4583(85)90115-3
15.
ZuoY.WangH.ZhaoJ. and XiongJ.: ‘The effects of some anions on metastable pitting of 316 stainless steel’Corros. Sci., 20024413–24. doi: 10.1016/S0010-938X(01)00031-2
16.
RefaeyS. A. M.Abd El-RehimS. S.TahaF.SalehM. B. and AhmedR. A.: ‘Inhibition of chloride localized corrosion of mild steel by , , and anions’Appl. Surf. Sci., 2000158190–196. doi: 10.1016/S0169-4332(00)00016-7
17.
ReffassM.SabotR.JeanninM.BerziouC. and RefaitPh.: ‘Effects of phosphate species on localised corrosion of steel in NaHCO3+NaCl electrolytes’Electrochim. Acta2009544389–4396. doi: 10.1016/j.electacta.2009.03.014
18.
TangY.ZhaoX.MaoJ. and ZuoY.: ‘The electrochemical characteristics of pitting for two steels in phosphate buffer solution with chloride’Mater. Chem. Phys., 2009116484–488. doi: 10.1016/j.matchemphys.2009.04.019
19.
Lakatos-VarsányiM.FalkenbergF. and OlefjordI.: ‘The influence of phosphate on repassivation of 304 stainless steel in neutral chloride solution’Electrochim. Acta199843187–197. doi: 10.1016/S0013-4686(97)00224-7
20.
UrretabizkayaM.PallottaC. D.De CristofaroN.SalvarezzaR. C. and ArviaA. J.: ‘Changes in the composition of the passive layer and pitting corrosion of stainless steel in phosphate-borate buffer containing chloride ions’Electrochim. Acta1988331645–1651. doi: 10.1016/0013-4686(88)80237-8
21.
RefaeyS. A. M.: ‘Inhibition of steel pitting corrosion in HCl by some inorganic anions’Appl. Surf. Sci., 2005240396–404. doi: 10.1016/j.apsusc.2004.07.014
22.
TzanevaB. R.LoukaychevaM. H. and FachikovL. B.: ‘Effect of phosphoric acid concentration on corrosion of Cr–Mn–N and Cr–Ni stainless steels’Corros. Eng. Sci. Technol., 201449219–227. doi: 10.1179/1743278213Y.0000000125
23.
QiaoY. X.ZhengY. G.OkaforP. C. and KeW.: ‘Electrochemical behaviour of high nitrogen bearing stainless steel in acidic chloride solution: effects of oxygen, acid concentration and surface roughness’Electrochim. Acta2009542298–2304. doi: 10.1016/j.electacta.2008.10.038
24.
VasudevanS.RajaV. S.SeshanS. and ChattopadhyayK.: ‘Study of influence of manganese additions on electrochemical corrosion behaviour of austenitic spheroidal graphite iron’Br. Corros. J., 198621, (2), 87–93. doi: 10.1179/000705986798272280
25.
KempM.van BennekomA. and RobinsonF. P. A.: ‘Evaluation of the corrosion and mechanical properties of a range of experimental Cr–Mn stainless steels’Mater. Sci. Eng. A1995199183–194. doi: 10.1016/0921-5093(94)09694-5
26.
TzanevaB. R.FachikovL. B. and RaichevR. G.: ‘Pitting corrosion of Cr–Mn–N steel in sulphuric acid media’J. Appl. Electrochem., 200636347–353. doi: 10.1007/s10800-005-9070-2
27.
Mitrovic-ScepanovicV. and BrighamR. J.: ‘Effect of manganese on pitting properties of type 301L stainless steel’Corrosion19965223–27. doi: 10.5006/1.3292091
28.
MuthupandiV.SrinivasanP. B.SeshadriS. K. and SundaresanS.: ‘Corrosion behaviour of duplex stainless steel weld metals with nitrogen additions’Corros. Eng. Sci. Technol., 200338303–308. doi: 10.1179/147842203225008895
29.
LothongkumG.WongpanyaP.MoritoS.FuruharaT. and MakiT.: ‘Effect of nitrogen on corrosion behavior of 28Cr–7Ni duplex and microduplex stainless steels in air-saturated 3·5 wt% NaCl solution’Corros. Sci., 200648137–153. doi: 10.1016/j.corsci.2004.11.017
30.
FuY.WuX.HanE.-H.KeW.YangK. and JiangZ.: ‘Effects of nitrogen on the passivation of nickel-free high nitrogen and manganese stainless steels in acidic chloride solutions’Electrochim. Acta2009544005–4014. doi: 10.1016/j.electacta.2009.02.024
31.
OlefjordI. and WegreliusL.: ‘The influence of nitrogen on the passivation of stainless steels’Corros. Sci., 1996381203–1220. doi: 10.1016/0010-938X(96)00018-2
32.
VaniniA. S.AudouardJ.-P. and MarcusP.: ‘The role of nitrogen in the passivity of austenitic stainless steels’Corros. Sci., 1994361825–1834. doi: 10.1016/0010-938X(94)90021-3
33.
LiH.JiangZ.YangY.CaoY. and ZhangZ.: ‘Pitting corrosion and crevice corrosion behaviors of high nitrogen austenitic stainless steels’Int. J. Miner. Met. Mater., 200916517–524. doi: 10.1016/S1674-4799(09)60090-X
34.
BursteinG. T.LiuC.SoutoR. M. and VinesS. P.: ‘Origins of pitting corrosion’Corros. Eng. Sci. Technol., 20043925–30. doi: 10.1179/147842204225016859
35.
ChenS. C.TuG. C. and HuangC. A.: ‘The electrochemical polishing behaviour of porous austenitic stainless steel (AISI 316L) in phosphoric–sulphuric mixed acid’Surf. Coat. Technol., 20052002065–2071. doi: 10.1016/j.surfcoat.2005.06.008
36.
SimardS.OdziemkowskiM.IrishD. E.BrossardL. and MenardH.: ‘In situ micro-Raman spectroscopy to investigate pitting corrosion product of 1024 mild steel in phosphate and bicarbonate solutions containing chloride and sulfate ions’J. Appl. Electrochem., 200131913–920. doi: 10.1023/A:1017517618191
, 
, 
and 
anions’