Phosphoric acid concentration (5-85%) effects on the corrosion behaviour of austenitic Fe–18Cr–12Mn–N steel have been studied by potentiodynamic polarisation measurements. After the anodic polarisation, both the film composition and the electronic structure have been investigated by X-ray photoelectron spectroscopy. The specimen surface examinations have been carried out by scanning electron microscopy. The results of the corrosion behaviour of the steel at issue have been compared to those relevant to two trademark materials [austenitic stainless steels AISI 304 (Fe–18Cr–9Ni) and X14AΓ15 (Fe–14Cr–15Mn–N)] and developed under the same test conditions.
OteroEPardoAUtrillaMVSáenzE and ÁlvarezJF: ‘Corrosion behaviour of AISI 304L and 316L stainless steels prepared by powder metallurgy in the presence of sulphuric and phosphoric acid’Corros. Sci.199840, 1421-1434.
2.
LewisGFoxPG and BodenPJ: ‘The corrosion of Fe–12Cr iron–chromium alloys in H3PO4’Corros. Sci.198020331–339.
3.
El HajjajiSAriesLAudouardJ.-P and DabosiF: ‘The influence of alloying elements on the corrosion resistance of stainless steels in phosphoric acid medium polluted by sulphide ions’Corros. Sci.199537927–939.
4.
IkenHBasseguyRGuenbourA and Ben BachirA: ‘Classic and local analysis of corrosion behaviour of graphite and stainless steel in polluted phosphoric acid’Electrochim. Acta200752, 2580-2587.
5.
GuenbourABuiNFaucheuJSeguiYBen BachirA and DabosiF: ‘The electrical properties of passive films formed on stainless steels in phosphoric acids’Corros. Sci.199030189–199.
6.
GabeDr: ‘Electropolishing of mild steel in phosphoric and perchloric acid containing electrolytes’Corros. Sci.197313175–185.
7.
ChenSCTuGC and HuangCA: ‘The electrochemical polishing behaviour of porous austenitic stainless steel (AISI 316L) in phosphoric–sulphuric mixed acid’Surf. Coat. Technol.2005200, 2065-2071.
8.
ChinD.-T and ChangHH: ‘On the conductivity of phosphoric acid electrolyte’J. Appl. Electrochem.19891995–99.
9.
WangH and TurnerJA: ‘Austenitic stainless steels in high temperature phosphoric acid’J. Power Sources2008180803–807.
10.
KurosakiM and SeoM: ‘Corrosion behaviour of iron thin film in deaerated phosphate solutions by an electrochemical quartz crystal microbalance’Corros. Sci.200345, 2597-2607.
11.
Abdel-AalMS and HermasAA: ‘Anodic polarization behaviour of cast iron alloys in deaerated concentrated H3PO4 solutions containing Cl− and F− ions’J. Appl. Electrochem.200030339–345.
12.
OsozawaK and EngellH.-J: ‘The anodic polarization curves of iron–nickel–chromium alloys’Corros. Sci.19666389–393.
13.
BrenetJPGabanoJP and ReynaudJ: ‘Complements apportes au diagramme tension–pH du manganese’Electrochim. Acta19638207–216.
14.
MelendezA and BrenetJ: ‘Contribution à l’étude du diagramme tension/pH du manganèse en milieux phosphoriques’, Electrochim. Acta197015173–177.
15.
MelendezA and BrenetJ: ‘Comportement électrochimique d'une électrode de manganèse en milieu phosphorique’, Electrochim.Acta19711661–77.
16.
RefaeySAM: ‘Inhibition of steel pitting corrosion in HCl by some inorganic anions’Appl. Surf. Sci.2005240396–404.
17.
ZhangYSZhuXM and ZhongSH: ‘Effect of alloying elements on the electrochemical polarization behaviour and passive film of Fe–Mn base alloys in various aqueous solutions’Corros. Sci.200446853–876.
18.
Lakatos-VarsányiMFalkenbergF and OlefjordI: ‘The influence of phosphate on repassivation of 304 stainless steel in neutral chloride solution’Electrochim. Acta199843187–197.
19.
CarmezimMJSimõesAMMontemorMF and Da Cunha BeloM: ‘Capacitance behaviour of passive films on ferritic and austenitic stainless steel’Corros. Sci.200547581–591.
20.
BakerMA and CastleJE: ‘The initiation of pitting corrosion at MnS inclusions’Corros. Sci.199334667–682.
21.
KrawiecHVignalVHeintzO and OltraR: ‘Influence of the dissolution of MnS inclusions under free corrosion and potentiostatic conditions on the composition of passive films and the electrochemical behaviour of stainless steels’Electrochim. Acta200651, 3235-3243.
22.
EklundGS: ‘Initiation of pitting at sulfide inclusions in stainless steel’J. Electrochem. Soc.1974121467–473.
23.
LavigneOAlemany-DumontCNormandBBergerMHDuhamelC and DelichéreP: ‘The effect of nitrogen on the passivation mechanisms and electronic properties of chromium oxide layers’Corros. Sci.201153, 2087-2096.
24.
LiHJiangZYangYCaoY and ZhangZ: ‘Pitting corrosion and crevice corrosion behaviors of high nitrogen austenitic stainless steels’Int. J. Miner. Met. Mater.200916517–524.
25.
OlefjordI and WegreliusL: ‘Surface analysis of passive state’Corros. Sci.19903189–98.
26.
OlefjordI and WegreliusL: ‘The influence of nitrogen on the passivation of stainless steels’Corros. Sci.199638, 1203-1220.
27.
VaniniASAudouardJ.-P and MarcusP: ‘The role of nitrogen in the passivity of austenitic stainless steels’Corros. Sci.199436, 1825-1834.
28.
ClaytonCR and OlefjordI: ‘Corrosion mechanisms in theory and practice’, (ed. MarcusP and OudarJ), 175–199; 1995New YorkMarcel Dekker.
29.
LeveyR and van BennekomA: ‘A mechanistic study of the effects of nitrogen on the corrosion properties of stainless steel’Corrosion199551911–921.
30.
AlmeidaEPereiraDFigueiredoMOLoboVMM and MorcilloM: ‘The influence of the interfacial conditions on rust conversion by phosphoric acid’Corros. Sci.199739, 1561-1570.
31.
PrabakaranK and RajeswariS: ‘Electrochemical, SEM and XPS investigations on phosphoric acid treated surgical grade type 316L SS for biomedical applications’J. Appl. Electrochem.200939887–897.
32.
SchreifelsJLabinePGaileyRGoewertSO'BrienM and JostS: ’An Auger depth profile study of corrosion-inhibiting films formed under cooling water conditions’, Corrosion198945420–428.
