This study compared the mechanical and microstructural properties produced during friction stir welding of S275 structural steel in air and underwater. Post-weld tests assessed the tensile strength, microhardness, distortion, Charpy impact toughness and fatigue performance in each case. The study showed that there was no significant difference in the strength, hardness or fatigue life of the air and underwater specimens. However, Charpy impact toughness was shown to decrease for the underwater specimens and was attributed to the presence of a slightly less angular grain structure than the samples welded in air. Reduced angular and longitudinal distortion was observed in the underwater welded plate compared to the plate welded in air.
ThomasW. M., JohnsonK. I. and WiesnerC. S.: ‘Friction stir welding – recent developments in tool and process technologies’, Adv. Eng. Mater., 2003, 5, (7), 485–490.
2.
ThomasW. M., NicholasE. D., NeedhamJ. C., MurchM. G., TemplesmithP. and DawesC. J.: ‘Friction stir welding’, International patent application no. PCT/GB92102203 and Great Britain patent application no. 9125978; 1991.
3.
PosadaM. and RoushS.: ‘Friction stir welding – a promising new technique for joining metals’, Seaframe, 2005, 1, (2), 17–18.
4.
NandanR., DebroyT. and BhadeshiaH. K. D. H.: ‘Recent advances in friction stir welding – process, weldment structure and properties’, Prog. Mater. Sci., 2008, 53, 980–1023.
5.
SimarA., BréchetY., De MeesterB., DenquinA. and PardoenT.: ‘Microstructure, local and global mechanical properties of friction stir welds in aluminium alloy 6005A-T6’, Mater. Sci. Eng. A, 2008, A486, 85–95.
6.
BalasubramanianV.: ‘Relationship between base metal properties and friction stir welding process parameters’, Mater. Sci. Eng. A, 2008, A480, 397–403.
7.
BhadeshiaH. K. D. H. and DebRoyT.: ‘Critical assessment: friction stir welding of steels’, Sci. Technol. Weld. Join., 2009, 14, (3), 193–196.
8.
GanW., LiZ. T. and KhuranaS.: ‘Tool materials selection for friction stir welding of L80 steel’, Sci. Technol. Weld. Join., 2007, 12, 610–613.
9.
RaiR., DeA., BhadeshiaH. K. D. H. and DebroyT.: ‘Review: friction stir welding tools’, Sci. Technol. Weld. Join., 2011, 16, (4), 325–342.
10.
PerrettJ., MartinJ., PetersonJ., SteelR. and PackerS.: ‘Friction stir welding of industrial steels’. Proc. TMS Annual Meet., February–March 2011, San Diego, CA, USA, TMS.
11.
SorensenC. D.: ‘Evaluation of PCBN pin tool wear during FSW of Structural steel’. Friction Stir Science and Technology (ONR), Book of Abstracts, PI Review Meeting, York, PA, USA, October 2009, 30.
12.
SongK. H., FujiiH. and KakataK.: ‘Effect of welding speed on microstructural and mechanical properties of friction stir welded Inconel 600’, Mater. Des., 2009, 30, 3972–3978.
13.
FujiiH., CuiL., TsujiN., MaedaM., NakataK. and NogiK.: ‘Friction stir welding of carbon steels’, Mater. Sci. Eng. A, 2006, A429, 50–57.
14.
LakshminarayananA. K. and BalasubramanianV.: ‘An assessment of microstructure, hardness, tensile and impact strength of friction stir welded ferritic stainless steel joints’, Mater. Des., 2010, 31, (10), 4592–4600.
15.
LiuH. J., ZhangH. J. and YuL.: ‘Effect of welding speed on microstructures and mechanical properties of underwater friction stir welded 2219 aluminium alloy’, Mater. Des., 2011, 32, 1548–1553.
16.
StewartW. C.: ‘Feasibility of underwater friction sir welding of HY-80 steel’; MSc thesis, Naval Postgraduate School, Monterey, CA, USA2011.
ToumpisA., GallowayA. M., CaterS. R. and McPhersonN. A.: ‘Development of a process envelope for friction stir welding of DH36 steel – a step change’, Mater. Des., 2014, 62, 64–75.
19.
McPhersonN. A., GallowayA. M., WoodJ. and CaterS. R.: ‘A comparison between friction stir welded and submerged arc welded DH36 steel thin plate’. Proc. 9th Int. Conf. on ‘Trends in welding research, Chicago, IL, USA, June 2012.
20.
LienertT. J., StellwagW. L.Jr. and LehmanL. R.: ‘Comparison of heat inputs: friction stir welding vs. arc welding’, Columbus, OH, Edison Welding Institute.
21.
BakerT. N., McPhersonN. A.. Unpublished work, University of Strathclyde, Glasgow, UK, 2014.
22.
RückertG., ChargyM., CortialF. and JorezF.: ‘Evaluation of FSW on high yield strength steels for shipbuilding’, Mater. Sci. Forum, 2014, 783–786, 1776–1781.
