Bulk density as method of evaluating reducibility of hard hematite ore in direct reduction process

Abstract

Massive hematite ore (MHO) is a special high grade iron ore used as lump ore in the process of obtaining direct reduced iron (DRI). The influence of porosity on the reducibility has been investigated using optical and scanning electron microscopes. Hematite is the main component of the samples and occurs as granular crystals (10 μm), microplates (1 μm) and euhedral martite (10-30 μm). Quartz, maghemite, kenomagnetite and goethite are minor components. Primary micropores (Å to 1 μm) are associated with microplaty crystals that fill cavities between granular hematite. Secondary micropores (Å to 5 μm) related to euhedral martite crystals are the most important. The total porosity of weathered samples, measured using nitrogen adsorption and mercury injection, attains values up to 18%, whereas unweathered samples have a porosity less than 2·5%. Varajão et al. showed that reducibility is strongly enhanced by porosity and this work shows that reducibility can be indirectly evaluated by bulk density.

Keywords

BULK DENSITY REDUCIBILITY EVALUATION HARD HEMATITE ORE DIRECT REDUCTION POROSITY

Get full access to this article

View all access options for this article.

References

VARAJAO

C. A. C.

, BRUAND

, RAMANAIDOU

E. C.

and GILKES

R. J.

: ‘Microporosity and reducibility of BIF hosted massive hematite ore, Iron Quadrangle, Brazil’, Anais da Academia Brasileira de Ciencias, 2002, 74, 113–126.

FEINMAN

and MACRAE

D. R.

: ‘Direct reduction and reduction smelting terminology’, in ‘Direct reduction iron - technology and economics of production and use’, (ed. J. Feinman and D. MacRae), 225-229; 1999, Warrendale, Iron and Steel Society.

SIKABIN

: ‘Development of direct reduction in the iron and steel industry’, in ‘Direct reduced iron - technology and economics of production and use’, (ed. Stephenson

R. L.

and Smaller

R. M.

), 3–7; 1980, Warrendale, Iron and Steel Society.

POVEROMO

J. J.

and SWANSON

A. W.

: ‘Iron bearing raw materials for direct reduction’, in ‘Direct reduction iron - technology and economics of production and use’, (ed. J. Feinman and D. MacRae), 59-79; 1999, Warrendale, Iron and Steel Society.

MUNIZ

G. L.

, SANTIAGO

T. C.

, MARINO

and ROSA

R. L.

: ‘Efeito da textura e da granulometria do ‘lump ore’ no processo de redução direta’, in Proc. 47 Congresso Anual da ABM, Belo Horizonte, 1992, ABM, pp. 239- 258.

XAVIER

E. DE M.

: ‘Relação entre o processo de redução direta e os atributos estruturais e texturais do minério de ferro granulado da Mina da Mutuca, Belo Horizonte, MG’, MSc Thesis, Universidade Federal de Ouro Preto, Brazil, p. 164; 1994.

MELFI

A. J.

, PEDRO

, NALOVIC

and QUEIROZ NETO

J. P.

: ‘Etude sur l'altération géochimique des itabirites du Brésil: Dissolution du quartz et instabilité de l'héma-tite primaire en conditions tropicales hydrolisantes’, Cah ORSTOM Ser Pedol, 1976, 14, 179–192.

RAMANAIDOU

, NAHON

, DECARREAU

and MELFI

A. J.

: ‘Hematite and goethite from duricrusts devel-oped by lateritic chemical weathering of precambrian banded iron formations’, Clay Clay Miner., 1996, 44, 22–31.

DORR

J. V. N.

: ‘Nature and origin of the high grade hema-tite ores of Minas Gerais, Brazil’, Econ. GeoL, 1965, 60, 1–46.

10.

MONNIER

, STENGEL

and FIES

J. C.

: ‘Une méthode de mesure de la densité apparente de petits aglomérats terreux: Application h. l'analyse des systémes de porosité du sol’, Ann. Agronomiques, 1973, 24, 533–545.

11.

MORRIS

R. C.

: ‘A textural and mineralogical study of the relationship of iron ore to banded iron formation in the Hamersley Iron Province of Western Australia’, Econ. GeoL, 1980, 75, 184–209.

12.

MORRIS

R. C.

: ‘Genesis of iron ore in iron formation by supergene and supergene metamorphic processes - A conceptual model’, in: ‘Handbook of strata-bound and stratiform ore deposits’, (ed. Wolf

K. H.

), Vol. 13, 73–235; 1985, Amsterdam, Elsevier.