The phenomenological theory of martensitic transformation was applied to a tension induced martensitic transformation in an AISI 304 austenitic stainless steel in order to estimate the transformation texture. Input data were obtained from the published literature. Calculated pole figures were constructed assuming a variant selection process based on Patel and Cohen's theory, which emphasises that a mechanical component of free energy is the driving force for martensitic transformation at temperatures above martensite start Ms. The results showed a remarkably good match between the calculated and published measured data.
PadilhaAF, RiosPR: ‘Decomposition of austenite in austenitic stainless steels’,ISIJ Int., 2002, 42, (4), 325–337.
2.
LecroiseyF, ‘PineauA: Martensitic transformations induced by plastic deformation in the Fe–Ni–Cr–C system’,Metall Trans., 1972, 3, 387–396.
3.
OlsonGB, CohenM: ‘Kinetics of strain-induced martensitic nucleation’,Metall Trans. A, 1975, 6A, 791–795.
4.
OlsonGB, CohenM: ‘Stress-assisted isothermal martensitic transformation: application to TRIP steels’,Metall Trans. A, 1982, 13A, 1907–1915.
5.
BlancG, LacombeP, BarouxB, BerangerG: ‘Stainless steels – les editions de la physique Les Ulis’, 595–611; 1993, Paris, Les Ulis.
6.
NagyE, MertingerV, TrantaF, SólyomJ: ‘Study on bulk aluminum matrix nano-composite fabricated by ultrasonic dispersion of nano-sized SiC particles in molten aluminum alloy’,Mater. Sci. Eng. A, 2004, A378, 308–313.
7.
ChoiJ.-Y, JinW: ‘Strain induced martensite formation and its effect on strain hardening behavior in the cold drawn 304 austenitic stainless steels’,Scr. Mater., 1997, 36, 99–104.
8.
PatelJR, CohenM: ‘Criterion for the action of applied stress in the martensitic transformation’,Acta Mater., 1953, 1, 531–538.
