Electropulsing was introduced into the turning process of the AISI 304 stainless steel. The results indicate that the main cutting force, microhardness and axial roughness on machined surface are reduced dramatically under appropriate electropulsing parameters. For AISI 304 stainless steel, the electropulsing applied in turning process can improve the plastic deformation ability in cutting area, increase lubricating property and change friction state between the tool and the workpiece in the forming process of the chip. It causes the arising of plastic stripping tear based on pure shear plastic deformation and brings obvious changes on morphologies of the machined surface and the corresponding chip.
DingF., TangG., XuZ. and TianS.: J. Mater. Sci. Technol., 2007, 23, (2), 273–276.
11.
XuZ., TangG., TianS., DingF. and TianH.: J. Mater. Process. Technol., 2007, 182, (1), 128–133.
12.
XuZ., TangG., TianS. and HeJ.: Mater. Sci. Eng. A, 2006, A424, (1), 300–306.
13.
ConradH., KaramN. and MannanS.: Scr. Metall., 1983, 17, (3), 411–416.
14.
JiangY., TangG., GuanL., WangS., XuZ., ShekC. and ZhuY.: J. Mater. Res., 2008, 23, (10), 2685–2691.
15.
SamuelE. I., BhowmikA. and QinR. S.: J. Mater. Res., 2010, 25, (6), 1020–1024.
16.
YuW. P., QinR. S. and WuK. M.: ‘Effect of electropulsing on grain refinement of a medium carbon low alloy steel’, in ‘Advances in superalloys: parts 1 and 2’ (ed. JiaoS., et al.,., 1849–1854; 2011, Stafa–Zurich, Trans Tech Publications Ltd.
17.
QinR. S., RahnamaA., LuW. J., ZhangX. F. and Elliott-BowmanB.: Mater. Sci. Technol., 2014, 30, (9), 1040–1044.
18.
GromovV. E., IvanovY. F., StolboushkinaO. A. and KonovalovS. V.: Mater. Sci. Eng. A, 2010, A527, (3), 858–861.
19.
KonovalovS. V., StolboushkinaO. A., IvanovY. F., FilipievR. A., GromovV. E. and TMS: ‘Effect of electric potential on the evolution of defect substructure and fracture surface of aluminum under creep’, 151–156; 2010, Warrendale, PA, Minerals, Metals & Materials Society.
20.
ConradH., GuoZ. and SprecherA.: Scr. Metall. Mater., 1990, 24, (2), 359–362.
21.
ConradH.: Mater. Sci. Eng. A, 2002, A322, (1–2), 100–107.
22.
ConradH., SprecherA. F. and MannanS. L.: J. Met., 1983, 35, (8), A62–A62.
23.
OkazakiK., KagawaM. and ConradH.: Scr. Metall., 1979, 13, (4), 277–280.
BangyanY.: ‘Research on mechanism and application of the electric hot machining’, PhD thesis, South China University of Technology, Guangzhou, China; 1989.
28.
KainthG. S. and ChaturvediM. N.: Int. J. Mach. Tools Manuf., 1975, 15, (4), 241–256.
29.
UmbrelloD., HuaJ. and ShivpuriR.: Mater. Sci. Eng. A, 2004, A374, (1–2), 90–100.
30.
AbukhshimN. A., MativengaP. T. and SheikhM. A.: Int. J. Mach. Tools Manuf., 2006, 46, (7–8), 782–800.
31.
HanminS.: ‘Metal cutting theory and practice: a new perspective’; 2003, Wuhan, Huazhong University of Science and Technology Press.
32.
TuoW., BangyanY. and XuezhiZ.: Tool Eng., 1998, 31, (12), 3.
JingX.: ‘Quantum mechanics’; 2004, Harbin, Harbin Institute of Technology Press.
36.
PostnikovS. N. and TeagueB.: ‘Electrophysical and electrochemical phenomena in friction, cutting, and lubrication’; 1978, NewYork, Van Nostrand Reinhold.
37.
XieJ. Q., BayoumiA. E. and ZbibH. M.: Int. J. Mach. Tools Manuf., 1998, 38, (9), 1067–1087.
38.
KomanduriR. and HouZ. B.: Int. J. Mech. Sci., 2000, 42, (9), 1715–1752.
39.
KomanduriR. and HouZ. B.: Int. J. Mech. Sci., 2001, 43, (1), 57–88.
40.
KomanduriR. and HouZ. B.: Int. J. Mech. Sci., 2001, 43, (1), 89–107.
41.
StephensonD. A. and AgapiouJ. S.: ‘Metal cutting theory and practice’; 2005, Boca Raton, FL, CRC Press.
