The processes of precipitation, restoration and phase transformation can interact in complex ways during thermomechanical processing of microalloyed steels to profoundly alter their structures and properties. Precipitation in austenite during hot deformation can strongly modify the kinetics of recovery and recrystallisation, subsequently affecting the nucleation and growth of ferrite during cooling. For steels containing strong carbide/nitride formers, interphase precipitation (IP) can occur in ferrite at the austenite/ferrite interface, conferring significant coherency strengthening. Much of what is known about this phenomenon is attributable to the impressive research efforts of Robert Honeycombe and his colleagues at Cambridge.
WoodheadJ. H. and KeownS. R.: A history of microalloyed steels’, in ‘HSLA steels — metallurgy and applications’, Proc. Int. Conf. HSLA steels ‘85, (ed.GrayJ. M..), 15; 1986, Beijing, ASM International.
2.
HoneycombeR. W. K.: ‘Fundamental aspects of precipitation in microalloyed steels’, in ‘HSLA Steels — metallurgy and applica-tions’, Proc. Int. Conf. HSLA steels ‘85, (ed. J. M. Gray etal.), 243; 1986, Beijing, ASM International.
3.
DeArdoA. J.: ‘New concepts in the design and processing of high performance steels’, in Proc. HSLA steels ‘95, (ed.LiuG.et al.), 99-112; 1995, Beijing, China Science and Technology Press.
4.
BakerT. N.: ‘Microalloyed steels — an invited review’, in ‘Developments in metals and ceramics’, Proc. Conf. on ‘70th birthday meeting of Sir Robert Honeycombe’, (ed. J. A. Charles ET AL.), 76-119; 1992, London, Institute of Materials.
5.
DunneD. P. and DunleaR. L.: Metall. Forum, 1978,12,156–164.
BatteA. D. and HoneycombeR. W. K.: J. Iron Steel Inst., 1973, 211, 284.
9.
HoneycombeR. W. K. and BhadeshiaH. K. D. H.: ‘Steels — microstructure and properties’, 2nd edn; Chap. 10, 1995, London, Metallurgy and Materials Science.
10.
DavenportA. T., BerryF. G. and HoneycombeR. W. K.: Met. ScL 1, 1968, 2, 104.
11.
HoneycombeR. W. K.: Metall Trans. A, 1976, 7A, 915.
12.
RicksR. A. and HowellP. R.: Met. Sci., 1982, 16, 317.
13.
RicksR. A. and HowellP. R.: Acta Met., 1983, 31, 853.
14.
RicksR. A., HowellP. A. and HoneycombeR. W. K.: Metall. Trans. A, 1979, 10A, 1049.
15.
BakerR. G. and NuttingJ.: ISI special report no. 64, 1959, 1.
16.
HoneycombeR. W. K.: ‘Ferrite’, Hatfield Memorial Lecture, 1979, Met. Set, 1980, 14, 201–214.
17.
BerryF. G., DavenportA. T. and HoneycombeR. W. K.: in ‘The mechanism of phase transformation in crystalline solids’, Institute of Metals Monograph no. 33, 328, 1969.
18.
SmithR. M.: ‘Structural aspects of the hot working of vanadium and niobium high strength low alloy steels’, PhD thesis, University of Wollongong, Wollongong, NSW, Australia, 1987.
19.
SmithR. M. and DunneD. P.: Mater. Forum, 1988, 11,166–181.
20.
SmithR. M., DunneD. P. and WilliamsJ. G.: Met. Forum, 1982,5, (2), 109.
21.
DunneD. P., SmithR. M. and ChandraT.: Proc. Thermec ‘88, Tokyo, Japan, June 1988, Iron Steel Institute, 275.
22.
SmithR. M., DunneD. P. and ChandraT.: in ‘High strength low alloy steels’, (ed. DunneD. P. and ChandraT.), 188; 1984, Port Kembla, NSW, South Coast Printers.
23.
AminR. K. and PickeringF. B.: in ‘Thermomechanical processing of microalloyed austenite’, (ed. A. J. de Ardo et al), 377; 1982, Pittsburgh, PA, AIME.
24.
RobertsW.: Scand. J. Metall., 1980, 9, 13.
25.
MorrisonW. B.: J. Iron Steel Inst., 1963, 201, 317.
26.
GrayJ. M. and YeoR. B. G.: Trans. ASM, 1968, 61, 225.
27.
Great Lakes Steel Corp.: Mech. Eng., 1959, 81, 53.
MorrisonW. B. and WoodheadJ. H.: J. Iron Steel Inst., 1963, 201, 43.
31.
MorganE. R., DancyT. E. and KorchynskyM.: J. Met., 1965, 829.
32.
PhillipsR. and ChapmanJ. A.: J. Iron Steel Inst., 1966, 204, 615.
33.
PickeringF. B.: ‘Physical metallurgy and the design of steels’, 1978, Essex, Applied Science Publishers Ltd.
34.
Ghasemi BanadkoukiS. S.: ‘Transformation characteristics and structure-property relationships for a copper-bearing HSLA steel’, PhD thesis, University of Wollongong, Wollongong, NSW, Australia, 1996.
35.
DunneD. P., Ghasemi BanadkoukiS. S. and YuD.: ISIJ Int., 1996, 36, 324.
KillmoreC. R., BarrettJ. F., CabelloA., SquiresI. F. and WilliamsJ. G.: Proc. Conf. on ‘Offshore mechanics and arctic engineer-ing’, The Hague, The Netherlands, March 1989, ASME.
38.
DunneD.P.: ‘Weldable copper strengthened low carbon steels’, Proc. HSLA steels ‘95, (ed. G. Liu, H. Stuart et al), 99-112; 1995, Beijing, China Science and Technology Press.
SellarsC. M.: ‘The influence of particles on recrystallisation during thermomechanical processing’, Proc. 1st RISO Conference on Metallurgy and Materials Science: Recrystall — 1 section and Grain Growth in Multiphase and Particle Containg Materials, (ed. by N. Hansen, A. R. Jones and T. Leffars), Raskilde, Denmark, 1980, 291.
41.
WeissI. and JonasJ. J.: Metall Trans. A, 1979, 10A, 831.
42.
YamamotoS., OuchiC. and OtsukaT.: in ‘Thermomechanical processing of microalloyed austenite’, (ed. A. J. de Ardo et al), 613; 1982; Pittsburgh, AIME.
43.
Abdollah-ZadehA.: ‘Investigation of deformation, recrystallisa-tion and precipitation in austenitic HSLA steel analogue alloys’, PhD thesis, University of Wollongong, Wollongong, NSW, Australia, 1996.
44.
Abdollah-ZadehA. and DunneD. P.: ‘Recovery and recrystallisa-tion in steel’, Proc. 37th MWSP Conf., Hamilton, Ont., Canada, 1996, ISS-AIME, 74.
45.
DunneD. P., ChandraT. and MisraS.: ‘HSLA steels — metallurgy and applications’, in Proc. Conf. Microalloying ‘85, (ed.GrayJ. M. et al), 207; 1985, Beijing, ASM.
