In this work, dedicated isothermal transformation studies were performed in a Fe–C–Mn–Nb alloy to obtain two types of precipitate morphology embedded in a similar ferritic matrix. Nano-hardness of individual ferrite grain was measured by using an in situ nano-mechanical tester. The peak of nano-hardness distribution from interphase and dispersed precipitate strengthened ferrite corresponds to the nano-hardness range of 2.6–2.8 and 2.5–2.6 GPa, respectively. A wider spread of nano-hardness from interphase precipitate strengthened ferrite was observed and rationalised by considering the variation in inter-particle spacing on slip planes. The ‘pop-ins’ on the load-depth curve was not able to be correlated with the morphology of a precipitate.
BatteADHoneycombeRWK.Strengthening of ferrite by vanadium carbide precipitation. Mater Sci. 1973; 7(1):160–168.
2.
BritoRMKestenbachHJ.On the dispersion hardening potential of interphase precipitation in micro-alloyed niobium steel. J Mater Sci. 1981; 16:1257–1263. doi: 10.1007/BF01033840
3.
FunakawaYShizakiTTomitaKDevelopment of high strength hot-rolled sheet steel consisting of ferrite and nanometer-sized carbides. ISIJ Int. 2004; 44(11):1945–1951. doi: 10.2355/isijinternational.44.1945
4.
YenHWChenPYHuangCYInterphase precipitation of nanometer-sized carbides in a titanium–molybdenum-bearing low-carbon steel. Acta Mater. 2011; 59:6264–6274. doi: 10.1016/j.actamat.2011.06.037
5.
KestenbachHJCamposSSMoralesEV.Role of interphase precipitation in microalloyed hot strip steels. Mater Sci and Technol. 2006; 22(6):615–626. doi: 10.1179/026708306X81487
6.
XuYZhangWNSunMXThe blocking effects of interphase precipitation on dislocations’ movement in Ti-bearing micro-alloyed steels. Mater Letters. 2015; 139:177–181. doi: 10.1016/j.matlet.2014.07.135
7.
ZurobHSHutchinsonCRBéchéAA transition from local equilibrium to paraequilibrium kinetics for ferrite growth in Fe–C–Mn: A possible role of interfacial segregation. Acta Mater. 2008; 56:2203–2211. doi: 10.1016/j.actamat.2008.01.016
OliverWCPharrGM.An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J Mater Res. 1992; 7(6):1564–1583. doi: 10.1557/JMR.1992.1564
10.
ZhangYJMiyamotoGShinboKEffects of α/γ orientation relationship on VC interphase precipitation in low-carbon steels. Scripta Mater. 2013; 69(1):17–20. doi: 10.1016/j.scriptamat.2013.03.020
11.
MiyamotoGHoriRPoorganjiBCrystallographic analysis of proeutectoid ferrite/austenite interface and interphase precipitation of vanadium carbide in medium-carbon steel. Metall Mater Trans A. 2013; 44(8):3436–3443. doi: 10.1007/s11661-013-1702-2
12.
MurakamiTHatanoHMiyamotoGEffects of ferrite growth rate on interphase boundary precipitation in V microalloyed steels. ISIJ Int. 2012; 52(40):616–625. doi: 10.2355/isijinternational.52.616
13.
ChenMYYenHWYangJR.The transition from interphase-precipitated carbides to fibrous carbides in a vanadium-containing medium-carbon steel. Scripta Mater. 2013; 68(11):829–832. doi: 10.1016/j.scriptamat.2013.01.020
YongQL.Secondary phases in steels. Beijing: Metallurgy Industry Press; 2006.
16.
KramerDEYoderKBGerberichWW.Surface constrained plasticity: oxide rupture and the yield point process. Philos Mag A. 2001; 81(8):2033–2058. doi: 10.1080/01418610108216651
17.
SoerWAAifantisKEDe HossonJTM.Incipient plasticity during nanoindentation at grain boundaries in body-centered cubic metals. Acta Mater. 2005; 53(17):4665–4676. doi: 10.1016/j.actamat.2005.07.001
18.
GouldstoneAAKohHJZengKYDiscrete and continuous deformation during nanoindentation of thin films. Acta Mater. 2000; 48(9):2277–2295. doi: 10.1016/S1359-6454(00)00009-4
19.
JinJShevlinSAGuoZX.Multiscale simulation of onset plasticity during nanoindentation of Al (001) surface. Acta Mater. 2008; 56(16):4358–4368. doi: 10.1016/j.actamat.2008.04.064
