Fabrication of ultrafine W – Cu powders by mechanical alloying

Abstract

Ultrafine composite powders of W – 15 wt-%Cu, W – 25 wt-%Cu, and W – 35 wt-%Cu have been fabricated by mechanical alloying. The effects of type of mill, process control agent, temperature of milling, and ball/powder ratio on the final products have been evaluated. The results show that the planetary ball mill possesses a higher impact energy intensity than that of the vibratory ball mill. The optimum milling time is confirmed by the formation of a nanocrystalline microstructure in the planetary ball mill after optimisation of the milling parameters. A steady state between cold welding and fracture is attained with a milling time of up to 25 h in the planetary ball mill under optimised conditions. Crystallites with sizes of 7 – 8 nm for W – Cu composite powders have been obtained after 25 h of ball milling. The powders obtained after mechanical alloying have been characterised in terms of their size, shape, phase constitution, and microstructural features using X-ray diffraction and scanning electron microscopy.