Autocorrelation is the most common method used to estimate velocity in color flow imaging. Measurement of reflector velocity is obtained by manipulating the echo-induced signals generated from consecutive transmitted pulses. The processing steps in autocorrelation, including quadrature detection, gating, fixed echo cancellation, and mean frequency calculation, are discussed. Aliasing, which arises from limited sampling rate of pulsed wave instruments, is described.
4. Mitchell DG. Color Doppler imaging: principles, limitations, artifacts. Radiology1990;177:1-10.
5.
5. O'Leary DH, Polak JF. Interrogating the carotids with color Doppler imaging. Diagnostic Imaging1988;10:204-210.
6.
6. Hedrick WR, Hykes DL, Starchman DE. Ultrasound Physics and Instrumentation. Third edition. Saint Louis, MO: Mosby-Year Book, 1995.
7.
7. Smith H, Zagzebski J. Basic Doppler Physics. Madison, WI: Medical Physics Publishing, 1991.
8.
8. Kasai C, Namekawa K, Koyano A, Omoto R. Real time two-dimensional blood flow imaging using an autocorrelation technique. IEEE Trans Sonics Ultrasonics1985;32:458-464.
9.
9. Barber WD, Eberhard JW, Karr SG. A new time domain technique for velocity measurements using Doppler ultrasound. IEEE Trans Biomed Eng1985;32:213-229.
10.
10. Shariati MA, Dripps JH, McDicken WN. A comparison of colour flow imaging algorithms. Phys Med Biol1993;38: 1589-1600.
