In this work, the biomass charcoal from rubber wood, coconut shell, corn cob, palm kernel shell, as a reductant in the smelting process of saprolitic nickel laterite has been observed in a laboratory submerged arc furnace. A total of 5 kg of saprolite, some reductant and limestone were smelted together in this furnace, which was adjusted to 0.8 of carbon stoichiometric and 0.8 of slag basicity. The smelting process was carried out for 1 h, and the pouring temperature was 1400 °C–1500 °C. From the result, the smelting process using corn cob charcoal and palm kernel shell charcoal showed almost similar nickel grade and recovery compared with using coke as a reductant, which is above 12% and 90%, respectively. It also has the same slag phase, that is, diopside, with a low melting point. These two types of biomass waste reductants could be replaced using coke in the future.
SuharnoBNurjamanFRifkiA, et al.Coke and coal as reductants in manganese ore: an experiment. Mineralogia2018; 49: 35–45. doi: 10.2478/mipo-2018-0004.
2.
SurupGRTrubetskayaATangstadM. Charcoal as an alternative reductant in ferroalloys production: a review. Processes2020; 8: 1–41. doi: 10.3390/pr8111432.
3.
KeroITEidemPAMaY, et al.Airborne emissions from Mn ferroalloy production. JOM2019; 71: 349–365. doi: 10.1007/s11837-018-3165-9.
4.
HamuyuniJSaarenmaaJMakelaP, et al.Pretreatment of manganese ore for improved energy efficiency and smelting furnace stability. In: The 16th International Ferro-Alloys Congress (INFACON XVI) (ed WaernesANTranellGTangstadMRingdalenEVan der EijkC), Trondheim, Norway, 27–29 September 2021, 2021, pp.1–9.
5.
WeiWSamuelssonPBJonssonPG, et al.Energy consumption and greenhouse gas emissions of high-carbon ferrochrome production. JOM2023; 75: 1206–1220. doi: 10.1007/s11837-023-05707-8.
6.
HolappaL. Towards sustainability in ferroalloy production. J South Afr Inst Min Metall2010; 110: 703–710.
7.
NorgateTHaqueNSomervilleM,et al.Biomass as a source of renewable carbon for iron and steelmaking. ISIJ Int2012; 52: 1472–1481. doi: 10.2355/isijinternational.52.1472.
8.
TianHGuoZZhanR, et al.Effective and economical of low-grade nickel laterite by a duplex process of direct reduction-magnetic separation process & rotary kiln-electric furnace and its industrial application. Powder Technol2021; 394: 120–132. doi: 10.1016/j.powtec.2021.08.043.
9.
RomeroJMPardoYSParraM, et al.Improving the rotary kiln-electric furnace process for ferronickel production: data analytics-based assessment of dust insufflation into the rotary kiln flame. Alex Eng J2022; 61: 3215–3228. doi; 10.1016/j.aej.2021.08.036.
10.
Quintero-CoronelDAGuillin-EstradaWDEcheverri-RomanJL, et al.Large- and particle-scale energy assessment of reduction roasting of nickel laterite ore for ferronickel production via the rotary kiln-electric furnace process. Therm Sci Eng Prog2022; 32: 1–14. doi: 10.1016/j.tsep.2022.101331.
11.
HaqueNNorgateT. Estimation of greenhouse gas emissions from ferroalloy production using life cycle assessment with particular reference to Australia. J Clean Prod2013; 39: 220–230. doi: 10.1016/j.jclepro.2012.08.010.
12.
SommerfieldMFriedrichB. Replacing fossil carbon in the production of ferroalloys with a focus on bio-based carbon: a review. Minerals2021; 11: 1286. doi: 10.3390/min11111286.
13.
BazalukOKieushLKoveriaA, et al.Metallurgical coke production with biomass additives: study of biocoke properties for blast furnace and submerged arc furnace processes. Materials2022; 15: 1–17. doi: 10.3390/ma15031147.
14.
SrivastavaUKawatraSKEiseleTC. Production of pig iron by utilizing biomass as a reducing agent. Int J Miner Proces2013; 119: 51–57. doi: 10.1016/j.minpro.2012.12.008.
15.
KieushLRiegerJSchenkJ, et al.A comprehensive review of secondary carbon bio-carriers for application in metallurgical processes: utilization of torrefield biomass in steel production. Metals2022; 12: 1–38. doi: 10.3390/met12122005.
16.
SuharnoBIlmanNPShofiA, et al.Study of low-grade nickel laterite processing using palm shell charcoal as reductant. Mater Sci Forum2020; 1000: 436–446. doi: 10.4028/www.scientific.net/MSF.1000.436.
17.
GuoXLiZHanJ, et al.Study of straw charcoal as reductant in co-reduction roasting of laterite ore and red mud to prepare powdered ferronickel. Mining Metall Explor2021; 38: 2217–2228. doi: 10.1007/s42461-021-00466-z.
18.
KotzeIJ. Pilot plant reduction of ferronickel from nickel oxide ores and dusts in a DC arc furnace. Miner Eng2002; 15: 1017–1022. doi: 10.1016/S0892-6875(02)00127-9.
19.
PisilaSPalovaraaPJongA,et al.Ilmenite smelting in a pilot scale DC-furnace. In: Proc. of The Fourteenth International Ferroalloys Congress: Energy Efficiency and Environmental Friendliness are The Future of The Global Ferroalloy Industry, Kiev, Ukraine, 2015, pp.202–209.
20.
SenRMukherjeeS. Maximisation of chromium content of ferrochrome in DC arc smelting. Miner Process Extractive Metallur2010; 119: 101–106. doi: 10.1179/174328510X49.
21.
NurjamanFHakimHZSeptiansyahB, et al.Smelting of low-grade saprolitic nickel ore in DC-arc furnace. J Min Metall B2023; 59: 497–506. doi: 10.2298/jmmb231110043n.
22.
RaoMLiGZhangX, et al.Reductive roasting of nickel laterite ore with sodium sulphate for fe-Ni production, part I: reduction/sulfidation characteristics. Sep Sci Technol2016; 51: 1408–1420. doi: 10.1080/01496395.2016.1166134.
23.
MaksumAHuseinMKEPermanaS, et al.A preliminary study on the reduction of limonite ore by using rice husk as a reducing agent. IOP Conf Ser: Mater Sci Eng2018; 316: 012050. doi: 10.1088/1757-899X/316/1/012050.
24.
ZulkaniaARochmadiRHidayatM,et al.Reduction reactivity of low grade iron ore-biomass pellets for a sustainable ironmaking process. Energies2022; 15: 1–16. doi: 10.3390/en15010137.
25.
AlterarySSMareiNH. Fly ash properties, characterization, and applications: a review. J King Saud Univ Sci2021; 33: 101536. doi: 10.1016/j.jksus.2021.101536.
26.
HuZHanYZalhafAS, et al.Harmonic sources modeling and characterization in modern power systems: a comprehensive overview. Electr Power Syst Res2023; 218: 109234. doi: 10.1016/j.epsr.2023.109234.
27.
ChenPXChuSJHanPW. The solubility of carbon in molten iron-nickel-silicon alloy at 1773 K and 1823 K. In: The Fourteenth International Ferroalloys Congress (INFACON XIV), Kiev, Ukraine, 3 May–4 June 2015, 2015, pp.528–535.
28.
JakEHayesPC. Slag phase equilibria and viscosities in ferronickel smelting slags. In: The 12th International Ferroalloys Congress (INFACON XII) (ed. A. Vartiainen), Outotec Oy, Finland, 6–9 June 2010, 2010, pp.631–639.
29.
JangKMaXZhuJ, et al.Phase equilibria in the system FeO-CaO-SiO2-Al2O3-MgO with CaO/SiO2 1.3. ISIJ Int2016; 56: 967–976. doi: 10.2355/isijinternational.ISIJINT-2016-099.
30.
ChuangHCHwangWSLiuSH. Effects of basicity and FeO content on the softening and melting temperatures of the CaO-SiO2-MgO-Al2O3 slag system. Mater Trans2009; 50: 1448–1456. doi: 10.2320/matertrans.MRA2008372.
31.
XuemingLJieQMengL, et al.Viscosity of SiO2-MgO-Al2O3-FeO slag for nickel laterite smelting process. In: The Fourteenth International Ferroalloys Congress (INFACON XIV), Kiev, Ukraine, 3 May–4 June 2015, 2015, pp.561–566.
32.
SvantessonJLGlaserBErssonM, et al.Study of dynamic refractory wear by slags containing very high FeO contents under steekmaking conditions. Ironmak Steelmak2021; 48: 607–618. doi: 10.1080/03019233.2020.1827672.
33.
LuoJLiGRaoM, et al.Control of slag formation in the electric furnace smelting of ferronickel for an energy-saving production. J Clean Prod2021; 287: 1–12. doi: 10.1016/j.jclepro.2020.125082.
34.
MezaFJBaddooNGardnerL. Derivation of stainless steel material factors for European and U.S. Standards. J Const Steel Res2024; 213: 1–12. doi: 10.1016/j.jcsr.2023.108383.
35.
MiaoyongZKuangdiX. Vacuum oxygen decarburization. In: XuK (ed) The ECPH encyclopedia of mining and metallurgy. Singapore: Springer, 2023, pp.1–2.
