Abstract
Block restructuring has been strongly emphasized in Japan for renovating cities. However, little is known about the relation between block size and building shape. Moreover, the shape of buildings designed on a block after restructuring is unclear. In this study, the relation between block size and building shape is analyzed quantitatively, and a three-dimensional building shape is estimated by a model using an urban planning GIS data set of Tokyo. Results show the quantitative relation between block size and building shape, and the building shape image on the blocks. Higher buildings and buildings with a basement tend to be built in larger blocks, leading to efficient use of the maximum volume permitted in the block. In addition, the region composed by larger blocks can be spacious, because the range of building setback will be long in larger blocks. Designation of a high floor area ratio may induce integration and enlargement of blocks. Blocks are less likely to be partitioned in zones when a high floor area ratio is designated.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
