An Elman network is used for the prediction of material removal rate (MRR) in electrical discharge machining (EDM). An Elman network is a dynamic recurrent neural network that can be used to model non-linear dynamic systems. Training of the models is performed with data from series of EDM experiments on AISI D2 tool steel from finishing, semi-finish to roughing operations. The machining parameters such as discharge current, pulse duration, duty cycle, and voltage were used as model input variables during the development of predictive models. The developed model is validated with a new set of experimental data that was not used for the training step. The mean percentage error of the model is found to be less than 6 per cent, which shows that the proposed model can satisfactorily predict the MRR in EDM.
MandalD.PalS. K.SahaP., ‘Modelling of electrical discharge machining process using back propagation neural network and multi-objective optimization using non-dominating sorting genetic algorithm-II’J. Mater. Process. Technol.186 (13) (2007): 154–162.
2.
ElmanJ., ‘Finding structure in time’Cogn. Sci.14 (1991): 179–211.
3.
TsaiK. M.WangP. J., ‘Predictions on surface finish in electrical discharge machining based upon neural network models’Int. J. Mach. Tools Mf.41 (2002): 1385–1403.
4.
IndurkhyaG.RajurkarK. P., ‘Artificial neural network approach in modelling of EDM process’Intelligent engineering systems through artificial neural networks (New York, New York: ASME Press, vol. 2, 1992): 845–850.
5.
PandaD. K.BhoiR. K., ‘Artificial neural network prediction of material removal rate in electro discharge machining’Mater. Mfg. Process.20 (2002): 645–672.
6.
WangK.GelgeleH. L.WangY.YuanQ.FangM., ‘A hybrid intelligent method for modelling the EDM process’Int. J. Mach. Tools Mf.43 (2002): 995–999.
7.
MarkopoulosA. P.ManolakosD. E.VaxevanidisN. M., ‘Artificial neural network models for the prediction of surface roughness in electrical discharge machining’J. Intell. Mfg19 (3) (2008): 283–292.
8.
PradhanM. K.BiswasC. K., ‘Neuro-fuzzy model and regression model a comparison study of MRR in electrical discharge machining of D2 tool steel’Int. J. Math. Phys. Engng Sci.3 (2002): 48–53.
9.
PradhanM. K.DasR.BiswasC. K., ‘Comparisons of neural network models on surface roughness in electrical discharge machining’Proc. IMechE, Part B: J. Engineering Manufacture223 (7) (2009): 801–808.
10.
PradhanM. K.BiswasC. K., ‘Neuro-fuzzy and neural network-based prediction of various responses in electrical discharge machining of AISI D2 steel’Int. J. A. dv. Mfg Technol.50 (2012): 591–610.
11.
JordanM., ‘Attractor dynamics and parallelism in a connectionist sequential machine’ In Proceedings of the Eighth Annual Conference of the Cognitive Science Society, 1986, pp. 531–546.
12.
SekerS.AyazE.TürkcanE., ‘Elman's recurrent neural network applications to condition monitoring in nuclear power plant and rotating machinery’Engng App. Artif. Intell.16 (2002): 647–656.
13.
MamalisA. G.VosniakosG. C.VaxevanidisN. M.ProhaszkaJ., ‘Macroscopic and microscopic phenomena of electro-discharge machined steel surfaces: an experimental investigation’J. Mech. Work. Technol.15 (1981): 335–356.
14.
DibitonoD. D.EubankP. T.PatelM. R.BarrufetM. A., ‘Theoretical model of the electrical discharge machining process I: a simple cathode erosion model’J. Appl. Phys.66 (1981): 4095–4103.
15.
KhanA., ‘Electrode wear and material removal rate during EDM of aluminum and mild steel using copper and brass electrodes’Int. J. Adv. Mfg Technol.39 (5–6) (2008): 482–487.
16.
MarafonaJ.WykesC., ‘A new method of optimising material removal rate using EDM with copper tungsten electrodes’Int. J. Mach. Tools Mf.40 (2002): 153–164.
17.
LeeS. H.LiX. P., ‘Study of the effect of machining parameters on the machining characteristics in electrical discharge machining of tungsten carbide’J. Mater. Process. Technol.115 (2002): 344–358.
18.
AssarzadehS.GhoreishiM., ‘Neural-network-based modelling and optimization of the electro-discharge machining process’Int. J. Adv. Mfg Technol.39 (2002): 488–500.
