Abstract
Donor–recipient matching in hand transplantation remains challenging. The usefulness of three-dimensional (3-D) virtual models and printed epitheses were compared with measurements on cadaveric extremities to evaluate the most accurate method of donor–recipient matching for allograft procurement. Ten anthropometric measurements were recorded from 12 human cadaveric upper extremities and matched to printed epitheses and 3-D virtual models. Five circumferential and two longitudinal measurements obtained an intra-class correlation of >0.75 with all three methods, with the Kaplan (0.973) and wrist circumferences (0.942) achieving the highest concordance. Measurement on cadaveric specimens was the most reliable method. Using different combinations of donor hand and recipient forearms, a series of 72 virtual transplantations were then created, and their compatibility rated by ten transplant surgeons. The results confirmed that anthropometric measurements, obtained directly from potential human donor limbs and based on wrist circumference as the primary parameter, provide the best and most clinically relevant donor–recipient match.
Keywords
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
