In order to study the influence of circular gap controlled by the tearing force on rescue parachute inflation performance, the Arbitrary Lagrange-Euler (ALE) coupling method is utilized to simulate the inflation process of the circular gap rescue parachute with fixed payload; the contact failure model of the open of circular gap was built by the sewing force of the sewing thread. The canopy structure model influenced by fabric permeability performance is proposed, and the differential pressure of permeable fabric is described in Ergun equation through the textile material permeability test. The numerical results calculated by LS-DYNA are compared with the results of airdrop test and the empirical method of parachute-payloads dynamics, and it is shown that the steady drag coefficient and transient shape during inflation are more consistent with the airdrop test results, and the dimensionless initial inflation time and the maximum equivalent opening shock are more realistic. The stress variations of each gore unity during inflation are investigated. The most dangerous time-space state point during inflation process was discovered. With the study of the influence of the circular gap structure of parachute on inflation performance, the numerical results show the circular gap structure can reduce the opening load and adjust the time of two inflation stages, which reduces the maximum effective stress in dangerous parts and improves the safety of canopy.
WangL. R. 1997 Parachute Theory and Application (Beijing: Astronautics Publishing House) 1997: 187–229. (in Chinese)
2.
TakizawaK., FritzeM., MontesD., SpielmanT., and TezduyarT.E., “Fluid-Structure Interaction Modeling of Ringsail Parachutes with Disreefing and Modified Geometric Porosity”, Computational Mechanics, 50 (2012) 835–854.
3.
TakizawaK., TezduyarT.E., BoswellC., KolesarR., and MontelK., “FSI Modeling of the Reefed Stages and Disreefing of the Orion Spacecraft Parachutes”, Computational Mechanics, published online DOI: 10.1007/s00466-014-1052-y (2014).
4.
PengY, ChengW K, SongX MSummary for the Research Methods of Parachute Inflation Process [J]. Chinese Space Science and Technology, 2004, (3): 38–44. (in Chinese)
5.
SteinK R, BenneyR J, and SteevesE C 1993 A computational model that couples aerodynamic structural dynamic behavior of parachutes during the opening process (Natick: United States Army Natick Research, Development And Engineering Center) [R] NASA-ADA264115, 1993p.5
6.
YuL, and MingX2007 Study on transient aerodynamic characteristics of parachute opening process [J]. Acta Mechanica Sinica, 2007, 23(6): 627–633.
7.
YuL, ShiX L, and MingX2007 Numerical Simulation of Parachute During Opening Process[J]. Acta Aeronautica et Astronautica Sinica, 2007, 28(1): 52–57.(in Chinese)
8.
TezduyarTE, BehrM, MittalS.A new strategy for finite element computations involving moving boundaries and interfaces-the deforming-spatial-domain/space–time procedure: I. The concept and the preliminary numerical tests. Comput Methods Appl Mech Eng1992; 94(3): 339–351.
9.
TezduyarTE, BehrM, MittalS, LiouJ.A new strategy for finite element computations involving moving boundaries and interfaces-the deforming-spatial-domain/space–time procedure: II. Computation of free-surface flows, two-liquid flows, and flows with drifting cylinders. Comput Methods Appl Mech Eng1992; 94(3): 353–371.
10.
TezduyarTE, AliabadiS, BehrM, JohnsonA, and MittalS, “Parallel Finite Element Computation of 3D Flows”, Computer, 26 (1993) 27–36.
11.
TezduyarTE, AliabadiSK, BehrM, and MittalS, “Massively Parallel Finite Element Simulation of Compressible and Incompressible Flows”, Computer Methods in Applied Mechanics and Engineering, 119 (1994) 157–177.
12.
KalroV, and TezduyarTE2000 A parallel 3D computational method for fluid–structure interactions in parachute systems [J]. Comput Methods Appl Mech Eng, 2000, 190: 321–332.
13.
SteinK, BenneyR, KalroVParallel computation of parachute fluid-structure interactions[R]. Proceedings of the 14th AIAA Aerodynamic Decelerator Technology Conference, San Francisco, AIAA-97–1505, 1997. p. 277
14.
SteinK, BenneyR, TezduyarTE, PotvinJ.Fluid–structure interaction of a cross parachute: numerical simulation. Comput Methods Appl Mech Eng2001; 191(6-7): 673–87.
15.
SatheS, BenneyR, CharlesR, DoucetteE, MilettiJ, SengaM, SteinK, and TezduyarTE, “Fluid-Structure Interaction Modeling of Complex Parachute Designs with the Space-Time Finite Element Techniques”, Computers & Fluids, 36 (2007) 127–135.
16.
TezduyarTE, and SatheS, “Modeling of Fluid-Structure Interactions with the Space-Time Finite Elements: Solution Techniques”, International Journal for Numerical Methods in Fluids, 54 (2007) 855–900.
17.
TezduyarTE, SatheS, PausewangJ, SchwaabM, ChristopherJ, and CrabtreeJ, “Interface Projection Techniques for Fluid-Structure Interaction Modeling with Moving-Mesh Methods”, Computational Mechanics, 43 (2008) 39–49.
TezduyarTE, TakizawaK, MoormanC, WrightS, and ChristopherJ, “Space-Time Finite Element Computation of Complex Fluid-Structure Interactions”, International Journal for Numerical Methods in Fluids, 64 (2010) 1201–1218.
20.
TakizawaK, MoormanC, WrightS, SpielmanT, and TezduyarTE, “Fluid-Structure Interaction Modeling and Performance Analysis of the Orion Spacecraft Parachutes”, International Journal for Numerical Methods in Fluids, 65 (2011) 271–285.
21.
TakizawaK, WrightS, MoormanC, and TezduyarTE, “Fluid-Structure Interaction Modeling of Parachute Clusters”, International Journal for Numerical Methods in Fluids, 65 (2011) 286–307.
22.
TakizawaK, SpielmanT, and TezduyarTE, “Space-Time FSI Modeling and Dynamical Analysis of Spacecraft Parachutes and Parachute Clusters”, Computational Mechanics, 48 (2011) 345–364.
23.
TakizawaK, BazilevsY, TezduyarTE, HsuM.-C, OisethO, MathisenKM, KostovN, and McIntyreS, “Engineering Analysis and Design with ALE-VMS and Space-Time Methods”, Archives of Computational Methods in Engineering, published online, DOI: 10.1007/s11831–014–9113–0 (2014).
24.
TakizawaK, and TezduyarTE, “Computational Methods for Parachute Fluid-Structure Interactions”, Archives of Computational Methods in Engineering, 19 (2012) 125–169.
25.
TakizawaK, MontesD, FritzeM, McIntyreS, BobenJ, and TezduyarTE, “Methods for FSI Modeling of Spacecraft Parachute Dynamics and Cover Separation”, Mathematical Models and Methods in Applied Sciences, 23 (2013) 307–338.
26.
TakizawaK, TezduyarTE, BobenJ, KostovN, BoswellC, and BuscherA, “Fluid-Structure Interaction Modeling of Clusters of Spacecraft Parachutes with Modified Geometric Porosity”, Computational Mechanics, 52 (2013) 1351–1364.
27.
TuttBenjamin A., TaylorAnthony P.The use of LS-DYNA to Simulate the Inflation of a Parachute Canopy[C]. 18th AIAA Aerodynamic Decelerator Systems Technology Conference and Seminar. AIAA-2005–1608.
28.
TuttBenjamin A., TaylorAnthony P.The Use of LS-DYNA to Assess the Performance of Airborne Systems North America Candidate ATPS Main Parachutes[C]. 18th AIAA Aerodynamic Decelerator Systems Technology Conference and Seminar. AIAA-2005–1609.
29.
CoquetYves, BordenavePascalImprovements in Fluid Structure Interaction Simulation of Parachute using LS-Dyna[C]. 21st AIAA Aerodynamic Decelerator Systems Technology Conference and Seminar. AIAA-2011–2590.
30.
ChengH, YuL, and XiaG2013A study on “bottleneck” phenomenon during parachute inflation [J]. JOURNAL OF NATIONAL UNIVERSITY OF DEFENSE TECHNOLOGY.35(1) 48–52.(in Chinese).
31.
YUL, ChengH, ZhanY N, LiS T.Study of parachute inflation process using fluid–structure interaction method [J]. Chinese Journal of Aeronautics, (2014), 27(2): 272–279.
32.
ChengH, ZhangX H, YuL, ChenM.Study of velocity effects on parachute inflation performance based on fluid-structure interaction method [J]. Applied Mathematics and mechanics, (2014). 35(9): 1177–1188
33.
JiaH, RongW, and ChenG L2009Spacecr. Recovery Remote Sens.3015(in Chinese).
34.
ChengH, YuL, RongW, etc. A Numerical Study of Parachute inflation Bases on a Mixed Method [J]. Aviation, 2012, 16 (4): 115–123.
