Evaluation of an Experimental Testing System for Non-Powered Hand Tools

Abstract

During the Eurohandtool Project an experimental testing system for non-powered hand tools was developed for laboratory testing. With this system, it is possible to measure simultaneously (1) the EMG activity of two muscles, (2) the opening angle of hand tool blades by means of a potentiometer and, (3) by means of strain gages, the force transmitted to the handle. The first part of evaluation of the system was to determine its time of warming-up, reliability, linearity and repeatability. This paper concentrates on the second part, during which the aim was to test the measurement system by comparing the forces needed to cut wood of a certain diameter, and the actual force required, as measured by a material-testing system. The correlation between forearm flexor muscle activity and the compression force created by the user was investigated. The evaluation of experimental testing system for non-powered hand tools has shown that there are methods to measure force demand, opening angle and EMG-activity simultaneously. However, it is recommended to make some improvements before this measurement system can be taken into widespread use.

Keywords

Ergonomics hand tool force measurement system EMG Eurohandtool

Get full access to this article

View all access options for this article.

References

Haapalainen

Kivistö-Rahnasto

Mattila

Ergonomic design of non-powered hand tools: An application of quality function deployment (QFD). Occupational Ergonomics (submitted).

Kadefors

Areskoug

Dahlman

Kilbom

Å.

Sperling

Wikström

Öster

1993. An approach to ergonomics evaluation of hand tools, Applied Ergonomics 24 (3) 203–211.

Kallionpää

Vilkki

Leppänen

1997. Oksasaksien ergonomiset ominaisuudet, Occupational Safety Engineering, Tampere University of Technology, Report 77, (In Finnish).

Kilbom

Å.

Mäkäräinen

Sperling

Kadefors

Liedberg

1993. Tool design, user characteristics and performance: A case study on plate-shears, Applied Ergonomics 24 (3), 221–230.

Loslever

Ranaivosoa

1993. Biomechanical and epidemiological investigation of carpal tunnel syndrome at workplaces with high risk factors, Ergonomics 36 (5), 537–554.

Niemelä

Leppänen

Päivinen

Mattila

Comparison of force measurement systems for hand tools. Occupational Ergonomics (submitted).

Nieminen

1994. Analysis of musculo-skeletal loading using electromyography and biomechanical modelling, VTT Publications 180, Espooo.

Päivinen

Haapalainen

Mattila

Ergonomic Design Criteria for Pruning Shears. Occupational Ergonomics (submitted).

Sperling

Dahlman

Wikström

Kilbom

Å.

Kadefors

1993. A cube model for the classification of work with hand tools and the formulation of functional requirements, Applied Ergonomics 24 (3), 212–220.

10.

Strasser

Wang

Hoffmann

1996. Electromyographic and subjective evaluation of hand tools: The example of masons' trowels, International Journal of Industrial Ergonomics 18, 91–106.

11.

Tichauer

E.R.

1978. The Biomechanical basis of Ergonomics: Anatomy Applied to the Design of Work Situations, A Wiley-Interscience Publication, New York.

12.

Zipp

1982. Recommendations for the Standardization of Lead Positions in Surface Electromyography, European Journal of Applied Physiology and Occupational Physiology 50, 41–54.