Knitted structures occupy a special position in composite preforming due to their
inimitable characteristics. An insight into the knitted structures with respect to
their composite preforming characteristics is presented in this article.
Directionality of knitted structures and requirements of high performance fibers for
knitting have been discussed. Contourability, net-shape preforming, high dynamic
mechanical properties along with easy and rapid manufacturability are the important
features of knitted structures to match the composite preform requirements. In this
article, the work done in the above areas of research have been critically reviewed.
Hull, D.
(1982). An Introduction to Composite Materials,
Cambridge University Press, Cambridge, UK
.
2.
Dewalt, P.L.
and
Reichard, R.P.
(1994).
Just How Good are Knitted Fabrics
, Journal of Reinforced Plastics and Composites, 13:
908-910
.
3.
Hearle, J.W.S.
(1994).
Textiles for Composites a Business Opportunity for the 21st Century Part I
, Textile Horizons, 14(6):
12-15
.
4.
Vinayak Ogale
and
Alagirusamy, R.
(2004).
Textile Preforms for Advanced Composites
, Indian Journal of Fiber and Textile Research,
29(9):
366-375
.
5.
Jones, F.R.
(1994). Handbook of Polymer-fiber Composites,
Polymer Science and Technology Series,
Longman, UK
.
6.
Chou, Tsu-Wei
and
Ko Frank, K.
(1989). Textile Structural Composites,
Elsevier Science, Amsterdam
.
7.
Harrocks, A.R.
and
Anand, S.C.
(2000). Handbook of Technical Textiles, Textile
Institute,
Woodhead Publishing limited, UK
.
8.
Mayer, J.
,
Joop, De Haan
,
Reber R.
and
Wintermantel, E.
(1999).
Knitted Carbon Fiber Reinforced Thermoplastics: Structure-properties Relations
, Material Science Research International, 5:
143-150
.
9.
Surya, D.
,
Pandita, Falconet D.
and
Verpoest, I.
(2002).
Impact Properties of Weft Knitted Fabric Reinforced Composites
, Composites Science and Technology, 62:
1113-1123
.
10.
Leong, K.H.
,
Ramakrishna, S.
,
Huang, Z.M.
and
Bibo, G.A.
(2000).
The Potential of Knitting for Engineering Composites
, A Review, Composites: Part A, 31:
197-220
.
Demboski, Goran
and
Bogoeva-Gaceva, Gordana
(2001).
Properties of Weft Knitted Composites Affected by Preform Stretching
, Applied Composite Materials, 8(6):
371-384
.
13.
Aart W. Van Vuure
and
Ko Frank, K.
(2003).
Net Shape Knitting for Complex Composite Preforms
, Textile Research Journal, 73(1):
1-10
.
14.
Huang, Z.M.
,
Ramakrishna, S.
and
Andrew, A.O. Tay
(1999).
A Micromechanical Modeling Approach to the Mechanical Properties of Textile
Elastomeric Composites
, Journal of Society of Material Science, Japan, Special Issue on
Recent Advances of Composites in Asia and Australasia,
5(3):
189-195
.
15.
Leong, K.H.
,
Falzon, P.J.
,
Bannister, M.K.
and
Herszberg, I.
(1998).
An Investigation of the Mechanical Performance of Weft-Knit Milano-Rib
Glass/Epoxy Composites
, Composites Science and Technology, 58:
239-251
.
16.
Raz, S.
(2000). The Karl Mayer Guide to Technical Textiles,
Karl Mayer Textilmaschinenfabrik, Germany
.
17.
Yoon, Hye-Shin
and
Park, Shin-Woong
(2002).
Determining the Structural Parameters that Affect Overall Properties of
Warp Knitted Fabrics using Cluster Analysis
, Textile Research Journal, 72(11):
1013-1022
.
18.
David, J. Spencer (2001). Knitting Technology, Woodhead Publishing Limited,
ISBN 1855733331, UK.
19.
Brackenbury, Terry (1992). Knitted Clothing Technology, Blackwell Science, UK.
20.
Pierce, F.T.
(1937).
The Geometry of Cloth Structure
, Journal of Textile Institute, 28:
T45
.
21.
Hearle, J.W.S.
,
Grosberg, P.
and
Backer, S.
(1969). Structural Mechanics of Fibers, Yarns and
Fabrics,
John Wiley Interscience, UK
.
22.
Leaf, G.A.V.
and
Glaskin, A.
(1955).
The Geometry of a Plain Knitted Loop
, Journal of the Textile Institute, 45:
T587-T605
.
23.
Munden, D.L.
(1959).
The Geometry and Dimensional Properties of Plain Knit Fabrics
, Journal of the Textile Institute, 50:
T448-T471
.
24.
Rudd, C.D.
,
Owen, M.J.
and
Middleton, V.
(1990).
Mechanical Properties of Weft Knit Glass Fiber/Polyester Laminates
, Composite Science and Technology, 39:
261-268
.
25.
Ramakrishna, S.
,
Huang, Z.M.
,
Teoh, S.H.
,
Tay, A.A.O.
and
Chew, C.L.
(2000).
Application of the Model of Leaf and Glaskin to Estimating the 3D Elastic
Properties of Knitted Fabric Reinforced Composites
, Journal of Textile Institute, 1(1):
132-150
.
26.
Ramakrishna, S.
and
Hull, D.
(1994).
Tensile Behavior of Knitted Carbon Fiber-fabric/epoxy Laminates - Part II:
Prediction of Tensile Properties
, Composite Science and Technology, 50:
249-261
.
27.
Gowayed, Y.A. (1992). An Integrated Approach to the Mechanical and
Geometrical Modeling of Textile Structural Composites, Doctoral Thesis, NCS
University, USA.
28.
Ruan, X.P.
and
Chou, T.W.
(1996).
Experimental and Theoretical Studies of the Elastic Behavior of
Knitted-fabric Composites
, Composite Science and Technology, 56:
1391-1403
.
29.
Ming Zheng
,
Huang, Ramakrishna, S.
and
Tay, A.A.O.
(1999).
A Micromechanical Approach to the Tensile Strength of the Knitted Fabric Composite
, Journal of Composite Materials, 33(19):
1758-1791
.
30.
Lomov, S.V.
,
Huysmans, G.
and
Verpoest, I.
(2001).
Hierarchy of Textile Structures and Architecture of Fabric Geometric Models
, Textile Research Jounal, 71(6):
534-543
.
31.
Robitaille, F.Long, A.C.
,
Jones, I.A.
and
Rudd, C.D.
(2003).
Automatically Generated Geometric Descriptions of Textile and Composite
Unit Cells
, Composite: Part A, 34:
303-312
.
32.
Gommers, B.
,
Verpoest, I.
and
Van Houtte, P.
(1998).
Analysis of Knitted Fabric Reinforced Composites: Part II, Stiffness and Strength’
, Composites: Part A, 29:
1589-1601
.
33.
Ming Huang, Zheng
and
Ramakrishna, S.
(2000).
Micromechanical Modeling Approaches for the Stiffness and Strength of
Knitted Fabric Composites: A Review and Comparative Study
, Composites: Part A, 31:
479-501
.
34.
Huang, Z.M.
,
Ramakrishna, S.
,
Tay, A.A.O.
,
Teoh, S.H.
and
Chew, C.L.
(1997).
A New Modeling Procedure for Estimating the Elastic Moduli of Knitted
Fabric Composites
, In: Proceedings of 5th Japan International SAMPE
Symposium, Tokyo, pp.
719-724
.
35.
Ming Huang, Zheng
,
Ramakrishna, S.
and
Aye Thwe, Aye
(2002).
Modelling and Characterization of Fatigue Strength of Laminated Composites
with Knitted Fabric Reinforcement
, Journal of Composite Materials, 36(15):
1781-1801
.
36.
Lau, K.W.
and
Dias, T.
(1994).
Knittability of High-modulus Yarns
, Journal of Textile Institute, 85(2):
173-190
.
37.
Hearle, J.W.S.
(2001). High Performance Fibres,
The Textile Institute, Woodhead Publishing, UK
.
38.
Knapton, J.J.F.
(1966).
The Dynamics of Weft Knitting: A Mathematical Analysis
, Textile Research Journal, 36:
706-714
.
39.
Knapton, J.J.F.
and
Munden, D.L.
(1966).
A Study of the Mechanism of Loop Formation on Weft Knitting Machinery: Part
I and II
, Textile Research Journal, 36:
1072-1091
.
40.
Epstein, M.
and
Nurmi, S.
(1991).
Near Net Shape Knitting of Fiber Glass and Carbon for Composites
, In: Proceedings of 36th International SAMPE Symposium,
Covina, CA, USA, pp.
102-113
.
41.
Savci, S.
,
Curiskis, J.I.
and
Pailthorpe, M.T.
(2001).
Knittability of Glass Fiber Weft Knitted Preforms for Composites
, Textile Research Journal, 71(1):
15-21
.
42.
Morton, W.E.
and
Hearle, J.W.S.
(1993). Physical Properties of Textile Fibres,
The Textile Institute, Woodhead Publishing, UK
.
Sarlin, J.
,
Pentti, P.
and
Jarvela, P.K.
(1990).
A New Type of Knitted Reinforcing Fabrics and Its Application
, In: Proceedings of Fourth European Conference on Composite
Materials, London, UK, pp.
621-623
.
45.
Ozer, Goktepe
(2001).
Use of Non-uniform Rational b-splines for three-dimensional Computer
Simulation of Warp Knitted Structures
, Turkish Journal of Engineering and Environmental Sciences,
25(4):
369-378
.
46.
Frank, K. Ko
(1989). Three-dimensional Fabrics for Composites, Textile
Structural Composites,
Elsevier Science, Amsterdam
.
47.
Rao, R.M.V.G.K.
,
Anand Nahar, G.
and
Alagirusamy, R.
(2000).
Mechanical Properties of Glass Composites Based on Knitted Preforms with Inlays
, Indian Journal of Fibre and Textile Research,
25(1):
115-120
.
48.
Padaki Naveen, V.
,
Vani, A.
,
Prakasha, V.
,
Divakar, C.J.
,
Ananth Krishnan, T.
and
Rao, R.M.V.G.K.
(2000).
Studies on Mechanical Behavior of Knitted Glass-epoxy Composites
, Journal of Reinforced Plastics and Composites,
19(5):
396-402
.
49.
Cox, B.N.
and
Davis, J.B.
(2001).
Knitted Composites for Energy Absorption under Tensile Loading
, Composites Part A: Applied Science and Manufacturing,
32A(1):
91-105
.
50.
Falconnet, D.
,
Bourban, P.E.
,
Pandita, S.
,
Manson, J-A.E.
and
Verpoest, I.
(2002).
Fracture Toughness of Weft-knitted Fabric Composites
, Composites Part B: Engineering, 33B(8):
579-588
.
51.
Khondker, Omar A.
(2001).
Trade-off Effect of the Knit-structural Parameters on the Tensile and
Impact Strength of Weft-knitted Textile Composites
, In: The Eighth East Asia-Pacific Conference on Structural
Engineering and Construction: Challenges in the 21st Century: EASEC-8
[Electronic Resource], p.
7
.
52.
Yang, G.
,
Lim, C.-T.
and
Ramakrishna, S.
(2001).
Low-velocity Impact of Weft-knitted Carbon Fabric/Epoxy Composites by a
Sharp-tipped Projectile
, In: Cancom 2001: Third Canadian International Composites
Conference, 21-24 August 2001, Quebec,
Canada, p.
9
.
53.
Huisman, M.R.S.
and
Maier, M.
(2000).
Investigation on the Crash Behavior of Knitted Glass Fibre Reinforced
Poly(ethylene-terephthalate) Structures
, International Journal of Crashworthiness,
5(1):
79-88
.
54.
Karger-Kocsis, J.
,
Ostgathe, M.
,
Czigany, T.
and
Gaal, J.
(1996).
Stiffness and Strength Anisotropy in the Tensile Response of Weft Knitted
Fabric-reinforced PEEK- and PET-composites
, Advanced Composites Letters, 5(3):
71-75
.
55.
Czigany, T.
and
Karger-Kocsis, J.
(2001).
A Comparison of the Mechanical Behaviour of Weft-knitted Glass and Carbon
Fiber Fabric-reinforced Polyamide-12 Composites Produced with Commingled
Staple Yarns
, Polymers and Polymer Composites, 9(8):
491-497
.
56.
Ko, F.K.
,
Krauland, K.
and
Scardino, F.
(1982).
Weft Insertion Warp Knit for Hybrid Composites, Progress in Science and
Engineering of Composites
, In:
Hayashiet al.
(eds), ICCM-V, Fourth International Conference on
Composites, pp.
982-987
.
57.
Godou, U.
,
Diestel, O.
and
Offermann. P.
(1998).
Biaxially Reinforced Multilayer Knit Fabrics for Plastic Reinforcement
, Technical Textiles, 41(6):
202-204
.
58.
Anand, S.C.
(1996).
Warp Knitted Structures in Composites
, In: Proceedings of Seventh European Conference on Composite
Materials, London UK, 2:
407-413
.
59.
Du, Guang-Wu
and
Ko, Frank
(1996).
Analysis of Multiaxial Warp-knit Preforms for Composite Reinforcement
, Composites Science and Technology,
56(3):
253-260
.
60.
Ko, F.K.
,
Fang, P.
and
Pastore, C.
(1985).
Multilayer Multidirectional Warp Knit Fabrics for Industrial Applications
, Journal of Industrial Fabrics, 4:
106-113
.
61.
Franzke, G.
,
Offermann, P.
,
Bischoff, T.
and
Wulfhorst, B.
(1997).
Multi-axial Warp Knitted Layers a Textile for Reinforcing Concrete
, In: Proceedings of 11th ICCM, 14-18th
July, Gold Coast, Australia, pp.
870-880
.
62.
Dexter, H.B.
and
Hasko, G.H.
(1996).
Mechanical Properties and Damage Tolerance of Multiaxial Warp-knit Composites
, Composite Science and Technology,
56(3):
367-380
.
63.
Marvin Dow B.
and
Benson Dexter H.
(1997). Development of Stitched, Braided and woven Composite
Structures, NASA/TP-97-206234 (Web based),
USA
.
64.
Smith, P.J.
,
Wilson, R.D.
and
Gibbins, M.N.
(1985). Damage Tolerant Wing Panels for Transport
Aircraft, NASA CR-951 (Web based),
USA
.
65.
Wagener, G.
(1993).
Stitch-bonded Non-crimp Products - New Possibilities for the Reinforcement
of Composites
, In: Proceedings of Internationale Techtextil Symposium,
Vol. 3(2), pp.
1-7
.
66.
Bini, T.B.
,
Ramakrishna, S.
,
Ming Huang, Zheng
and
Lim, T.C.
(2001). Structure-tensile Property Relationship of Knitted
Fabric Composites Polymer Composites, 22(1): 11-21.
67.
Hong, H.
,
De Araujo, M.D.
,
Fangueiro, R.
and
Ciobanu, O.
(2002).
Theoretical Analysis of Load-extension Properties of Plain Weft Knits made
from High Performance Yarns for Composite Reinforcement
, Textile Research Journal, 72(11):
991-995
.
68.
Shahnan, W.J.
and
Postle, R.
(1974).
A Theoretical Analysis of the Tensile Properties of Plain Knitted Fabrics,
Part 1: The Load-extension Curve for Fabric Extension Parallel to the Courses
, Textile Research Journal, 65:
T200-T209
.
69.
Cook, D.L.
and
Grosberg, P.
(1961).
The Load-extension Properties of Warp Knitted Fabrics
, Textile Research Journal, 3:
636-643
.
70.
Gommers, B.
,
Verpoest, I.
and
Van Houtte, P.
(1998),
Analysis of Knitted Fabric Reinforced Composites: Part I. Fiber Distribution
, Composites, 29:
1579-1588
.
71.
Luo, Yiwen
and
Verpoest, Ignaas
(1999).
Compressibility and Relaxation of a New Sandwich Textile Preform for Liquid
Composite Molding
, Polymer Composites, 20(2):
179-191
.
72.
Khondker, O.A.
,
Leong, K.H.
and
Herszberg, I.
(2001).
An Investigation of the Structure-property Relationship of Knitted Composites
, Journal of Composite Materials, 35(6):
489-508
.
73.
Khondker, O.A.
,
Leong, K.H.
,
Herszberg, I.
and
Hamada, H.
(2004).
Impact and Compression-after-impact Performance of Weft-knitted Glass
Textile Composites
, Composites: Part A, 35:
145-157
.
74.
Bannister, M.
and
Herszberg, I.
(1995).
The Manufacture and Analysis of Composite Structures from Knitted Preforms
, In: Proceedings of 4th International Conference on Automated
Composites, 6-7 Sept., Vol. 2, Institute of
Materials, Nottingham, UK, pp.
397-404
.
75.
de Araujo, M.
,
Hong, H.
and
Fangueiro, R.
(1996).
The Production of Shaped Reinforcing Fabrics by Knitting to Shape
, TECNITEX Conference, 20-23 November
1996, Turin, Italia.
76.
Hu, Jinlian
and
Jiang, Yaming
(2002).
Modeling Formability of Multiaxial Warp Knitted Fabrics on a Hemisphere
, Composites Part A, 33:
725-734
.
77.
de Haan, J.
,
Kameo, K.
,
Nakai, A.
,
Fugita, A.
,
Mayer, J.
,
Wintermantel, E.
and
Hamada, H.
(1997).
Notched Strength of Knitted Composites
, In: Proceedings of 11th ICCM, 14-18th
July, Vol. 5, Gold Coast, Australia, pp.
219-226
.
78.
Herszberg, I.
,
Falzon, P.J.
,
Leong, K.H.
and
Bannister, M.K.
(1996).
Bearing Strength of Glass/epoxy Composites Manufactured from Weft Knitted
E-glass Fabric
, In: Proceedings of First Australian Congress on Applied
Mechanics, 21-23 Feb., The Institute of
Engineers, Melbourne, Australia, pp.
279-284
.
79.
Savci, S.
,
Curiskis, J.I.
and
Pailthorpe, M.T.
(2000).
A Study of the Deformation of Weft-knit Preforms for Advanced Composite
Structures Part 1: Dry Preform Properties
, Composites Science and Technology,
60(10):
1931-1942
.
80.
Postle, R.
(2002).
Structural Mechanics of Knitted Fabrics for Apparel and Composite Materials
, International Journal of Clothing Science and Technology,
14(3-4):
257-268
.
81.
Manson, J.A.E.
,
Rozant, O.
and
Bourban, P.E.
(2000).
Drapability of Dry Textile Fabrics for Stampable Thermoplastic Performs
, Composites Part A: Applied Science and Manufacturing,
31A(11):
1167-1177
.
82.
Leong, K.H.
,
Nguyen, M.
and
Herszberg, I.
(1999).
The Effects of Deforming Knitted Glass Fabrics on the Basic Composite
Mechanical Properties
, Journal of Materials Science, 34(1):
2377-2387
.
83.
Ferland, Pierre
,
Guittard, Dominique
and
Ois Trochu, Franc
(1996).
Concurrent Methods for Permeability Measurements in Resin Transfer Molding
, Polymer Composites, 17(1):
149-153
.
84.
Um, Moon-Kwang
and
Lee, Sang-Kwan
(1999).
A Study of Determination of In-plane Permeability of Fiber Preforms
, Polymer Composites, 20(6):
771-776
.
85.
Kim, Sun K.
,
Opperer, Jeremy G.
,
Kim, Dae-Hwan
and
Daniel, Isaac M.
(2003).
Determination of In-plane Permeability of Fiber Preforms by the Gas Flow
Method using Pressure Measurements
, Polymer Composites, 24(1):
34-41
.
86.
Arendts, F.J.
and
Drechsler, K.
(1991).
MB6-Z-0356-RUB1/4OTN-033059
, In: Proceedings of 3rd International Symposium, Advanced
Composites in Emerging Technologies, 20-24th Aug.,
University of Patras, Greece, pp.
22-26
.
87.
Niedermeier, M.
and
Horsting, K.
(1996).
Innovative Composite Design Rail Vehicles with Multiaxial Layer
Reinforcement Fabrics
, In: Proceedings of Texcomp-3, Vol. 22(1),
Aachen, Germany.
88.
Janicka, Jolanta
,
Kozminska, Romualda
and
Majewska, Miroslawa
(2003).
Net-shape Knitted Fabrics as Carrying Elements in Technical Composite Products
, Autex Research Journal, 3(3):
29-35
.
89.
Peled, A.
and
Bentur, A.
(2003).
Fabric Structure and its Reinforcing Efficiency in Textile Reinforced
Cement Composites
, Composites: Part A, 34:
107-118
.
90.
Rudd, C.D.
,
Long, A.C.
,
Kendall, K.N.
and
Mangin, C.G.E.
(1997). Liquid Moulding Technologies,
Woodhead Publishing Limited, Cambridge, UK
.
91.
Gibbon, J.
(1994).
Knitting in the Third Dimension
, Textile Horizons, 14(6):
22-25
.
92.
Ramani, Karthik
and
Dai, Heming
(2002).
Design and Process for Preformed Woven, Knitted and Braided Thermoplastic
Composite Arrester
, Composite Materials, 36(20):
2357-2372
.
93.
Sheffer, E.
and
Dias, T.
(1998).
Knitting Novel 3-D Solid Structures with Multiple Needle Bars
, In: Proceedings of UMIST Textile Conferences-Textile Engineering
for Performance, Manchester, UK.
94.
Ramakrishna, S.
,
Ramaswamy, S.
,
Toeh, S.H.
,
Hestings, G.W.
and
Tan, C.T.
(1996).
Application of Textile and Textile Composite Concepts for Biomaterials Development
, In: Proceedings of Texcomp-3, Vol. 27(1),
Aachen, Germany.
95.
Ming Huang, Zheng
and
Ramakrishna, S.
(1999).
Development of Knitted Fabric Reinforced Composite Material for Prosthetic Application
, Advanced Composites Letters, 8(6):
289-294
.
96.
Cheng, K.B.
,
Ramakrishna, S.
and
Lee, K.C.
(2001).
Electrostatic Discharge Properties of Knitted Copper Wire/Glass Fiber
Fabric Reinforced Polypropylene Composites
, Polymer Composites, 22(2):
185-196
.
